Joyoung soybean milk machine makes soybean milk, will it cut off the power or artificially cut off t

The whole process has to go through more than 6 times of stirring and several times of heating (including the process of simmering), it takes a certain amount of time, but it can be completed within 20 minutes, after the completion of the soybean milk machine will stop working by itself, just like a rice cooker, automatically tripping into the state of heat preservation (some models do not have heat preservation), power failure or rely on artificial unplugging.

The so-called "automatic power-off" in the soymilk machine is an industry term that is intended to automatically stop working, rather than cutting off the power supply in the real sense, just like "standby" in a TV or computer.

Joyoung soybean milk soybean milk after the end of the machine has an alarm prompt and with the selected function button flashing, without power-off, the machine will automatically enter the heat preservation function, and the machine without heat preservation will enter the standby state.

Hello, glad to answer for you.

The power will be automatically cut off, but it will keep beeping alarm, and the indicator light will keep flashing until you unplug it.

If you still have questions, please feel free to ask Joyoung Sunshine Service.

The whole process of making soy milk lasts about 15 to 20 minutes, first heating - then pre-grinding - reheating - grinding - boiling the soy milk.

The power will be automatically cut off, but it will keep beeping alarms until you unplug it.

Recently I bought a JYDZ-29, and the soy milk tastes good.

The power is automatically cut off, but the wires still have to be unplugged by themselves.

Summary. 1. If the ordinary soymilk machine is powered on twice, you need to check whether the beans are broken: if they have been broken, please put them in other pots and pans to boil and drink, if they are not broken, please cool the machine for about 20 minutes and then re-select the button to work again

2. The secondary power on of the ordinary wall-breaking conditioning machine is prone to E10 (viscous ingredients) or E19 (high temperature in the cup) alarm in the middle of the second power-on, and the secondary production cannot be restarted, so it is recommended to replace the ingredients and water to re-make it

3. Models with power-off memory (please refer to the manual for details) are generally 30 seconds, and they can continue to work if they are powered on immediately after accidentally powering off

4. Models without power-off memory (please refer to the manual for details) It is recommended to re-add ingredients and water for production, otherwise it is easy to have abnormal alarms or the risk of slurry overflow, and it will not work normally.

What should I do if the Joyoung soybean milk machine loses power halfway How to let him continue to work?

Dear, let's do it like this.

1. If the ordinary soymilk machine is powered on twice, you need to check whether the beans are broken: if it has been coarsely crushed, please put it in other pots and pans to boil and drink, if it is not broken, please cool the machine for about 20 minutes and then re-select the button to work again 2. The second power on of the ordinary wall-breaking and dressing machine is prone to E10 (viscous ingredients) or E19 (the temperature in the cup is too high) alarm, and the secondary production cannot be restarted, and it is recommended to replace the ingredients and water to remake 3. Models with power-off memory (please refer to the manual for details) are generally 30 seconds, and they can continue to work immediately after accidentally powering off 4. Models without power-off memory (please refer to the manual for details) It is recommended to re-add ingredients and water for production, otherwise it is easy to have abnormal alarm draft or slurry overflow risk, and it will not work normally.

Hope it helps, dear.

I'm a no-wash, I've already poured out the ingredients, what are I doing?

Pro, put it to continue powering up work.

It is not possible to proceed with the start of the program. Joyoung soymilk machine loses power halfway, if it is powered off in the first third of the whole process, it can continue to start again after powering on. Not at all.

If the dust is broken in the second third, you can only pour out the unbeaten soy milk, and you can no longer work continuously. If you need to make it, you need to discard the ingredients and add new ones to make it.

If there is a power outage during the working process of the machine (especially during the later stage of pulping to the completion of the work), please do not press the function button to work, otherwise it will cause the heater to paste the pipe, the soybean milk splash during the beating or the machine beep alarm failure.

There are three situations when the soymilk machine stops after it starts:

1. The temperature of the water added to the soymilk is too high, and the soymilk machine will produce self-heating when it is working, and the soymilk machine will automatically stop working when the temperature detection temperature of the temperature probe is too high. Solution: Unplug the power of the soymilk machine, and wait for the water in the soymilk machine to cool down slightly, and then you can make soy milk again.

2. The soymilk machine itself has the function of alternating heating program and beating program, simply put, celery and lead is to beat for a while, boil for a while, then beat, then boil, and cycle alternately, because it will paste the pot all the time, this is the setting of the intelligent program, don't worry.

3. Excluding the above two situations, the soymilk machine only rotates one or two times and stops, which is generally caused by motor failure. Solution: There are many problems with motor failure, which need to be repaired after the sale, and do not disassemble it without authorization.

The machine has a 30-second power-off memory, and the power-off time is no more than 30 seconds. If it has been more than 30 seconds, you need to select the cleaning function, pour out the unfinished soybean milk, clean the cup, and sell it in the next normal operation.

Summary. Joyoung soymilk machine does not stop after the work is completed: There are several reasons why the soymilk machine will not automatically stop after beating the soymilk:

1. The thermostat is broken, causing the computer board to be unable to recognize the signal that the soybean milk has been cooked, resulting in continuous heating and rotation. 2. The computer board program is wrong, resulting in the soymilk machine not being able to send the end instruction according to the normal program. 3. Relay contact sticking or triacor breakdown short circuit, resulting in the motor running all the time without being controlled by the computer board.

If a problem is detected, replace the part accordingly.

Joyoung soybean milk machine does not stop when the work is completed?

Joyoung soymilk machine does not stop after the work is completed: the soymilk machine will not automatically stop after beating the beans and calling the reed milk for the following reasons: 1. The thermostat is broken, which causes the computer board to be unable to recognize the signal that the soymilk has been cooked, resulting in continuous heating and rotation.

2. The computer board program is wrong, resulting in the soymilk machine not being able to send the end instruction according to the normal program. 3. Relay contact sticking or thyristor breakdown short circuit and belt, resulting in the motor is not controlled by the computer board and is always running. If a problem is detected, replace the part accordingly.

Joyoung soymilk machine only cooks and will not stop for the following reasons: 1. The thermostat is broken, which causes the computer board to be unable to recognize the signal that the soybean milk has been cooked, resulting in continuous early heating and rotation of the orange sail. 2. The computer board is wrong in the round bird sequence, resulting in the soymilk machine not being able to send the end instruction according to the normal program.

3. The relay contact car is adhered to or the thyristor is broken down and short-circuited, resulting in the motor not being controlled by the computer board and always running. If a problem is detected, replace the part accordingly.

After my Joyoung soymilk machine is turned on, it stops working after a while and stops working after only one turn when it starts beating, what's going on? How to repair?

Hello, I am happy to answer your questions, 1. If the temperature of the water added to the soybean milk is too high, and the soymilk machine will cause self-heating when it is working, when the temperature detection temperature of the temperature probe is too high, the soymilk machine will stop working when the protective measures are started. Solution: Unplug the soymilk machine, let it stand for a few minutes, and wait for the inside of the soymilk machine to cool down slightly, and then it can work.

2. It belongs to the intelligent program setting, because the bean slow and liquid slurry ignition engine has the function of alternating the heating program and the beating program, beating for a while, boiling for a while, and then continuing to work, so that the cycle is repeated, so as not to paste the pot, this situation does not need to be handled. 3. If it is not for the above two situations, it will stop after only turning once, which is likely to be caused by motor failure. In this case, the disturbance should be repaired and disposed of after the sale, and it cannot be disassembled without permission.