Huawei P6 is flooded and can t be turned on

After entering the water, it should be turned off immediately, and then the hair dryer and cold wind blow for a while, and then put it in the rice bag (the rice bag has good water absorption), and it can be reused after placing it for at least a day.

There is no warranty for digital products when they enter the water, this belongs to the human factor, all manufacturers do not warrant, you can only pay for maintenance. If there is water ingress, it is possible that the motherboard has been burned, and the repair cost will be very high.

After the mobile phone is flooded, there may be abnormal function, in order to reduce the loss, it is recommended to deal with it according to the following methods:

1.Try to place your phone in a dry and ventilated place, and use a paper towel to blot water stains on the surface of your phone.

2.If the phone is powered on, press the power button to turn it off; If your phone is turned off, don't try to turn it on.

3.Remove the SIM card and memory card.

4.Take your phone to a nearby Huawei customer service center for maintenance as soon as possible to avoid unnecessary losses. If you haven't backed up before, it may result in data loss.

Notes:1Do not move or shake your phone frequently after water is ingress to avoid moisture spreading inside the phone.

2.Do not blow with a hair dryer or bake at high temperatures after water is in, so as to avoid liquid being blown into the phone and damage the phone by high temperatures.

3.Mobile phones are made of delicate electronic components, and there is a hidden risk after water ingress, so it is recommended not to try to turn them on.

In case of water, you must first remove the battery and cut off the power. Then disassemble the cover, blow the hair dryer cold, and if it doesn't work, find Huawei after-sales!

This one is still flooded, and it can be used at first, but the water hasn't damaged your machine, and then it's over.

The reasons why P6 won't turn on Huawei phones and how to solve them are as follows:

Make sure your phone is charged. When charging your phone, the charging indicator will flash, keep it charged and wait for a while before trying to turn it on. (If the mobile phone can also back up the information, remember that Ma Liang Wang returned to the backup, it is recommended that the usual important information should be backed up by an SD card or other means).

2.If the phone is stuck and unresponsive, you can press and hold the power button for 10s to force restart it to see if it can be recovered.

3.If the above methods do not solve the problem, it is recommended to bring the purchase invoice to the local Huawei after-sales service center for inspection and repair. The following describes how to query the address information of the Huawei Customer Service Center:

<> can also have an after-sales outlet address inquiry entrance at the bottom of the official website page of Huawei**;

The mobile phone must be taken out as soon as possible to remove the electric board, SIM card, shake off the water on it, immediately dry the water on it with a dry cloth, and then use a hair dryer (ordinary temperature is OK,) to dry, must not be placed in the sun to dry, let alone roasted with fire, a sun quasi-scrapped, and then put in a cool place to dry (if possible, you can use a household electric fan to blow a morning), to ensure that your mobile phone can be turned on normally the next day, if your mobile phone is soaked in water for more than ten minutes, or after removing the SIM card of the electric board, Go to a professional technician, generally within 5 minutes you can use this method to bring the dead back to life.

In the case of power-on, it falls into clean water, which generally does not need to be disassembled

Turn off the power as soon as possible. Shake it dry, but don't shake the machine off, the idea is to shake the water out of the screen. If there are water droplets left on the screen, there will be traces after drying.

Place under a slight heat source such as a desk lamp or spotlight to let the moisture slowly dissipate. This process takes more than six hours. Do not use a strong heat source such as a hair dryer in a hurry. Blow it and it's over.

Falling into a non-corrosive liquid in the event of a power outage:

Shake it dry, but don't shake it off.

If there is no trace on the LCD screen, it shall be processed according to Article 3 of the first point.

If there is something left on the screen and it is very serious, do not deal with it according to point 1, paragraph 3, because although the electronic circuit can work normally, the screen may be quite ugly. It can be sent to the nearest maintenance department for processing or dismantling the machine for cleaning by yourself. (Those with poor hands-on ability should still be repaired by professionals).

Falling into non-clean water when energizing, or falling into corrosive or viscous liquids or other clean liquids regardless of whether they are energized or not:

Turn off the power as soon as possible. If you fall into a corrosive liquid (e.g. seawater), rinse the machine with clean water immediately. Or immerse the machine in clean water and try to dilute the corrosive liquid inside.

Disassemble the machine as soon as possible. But take your time when disassembling the machine.

Rinse with alcohol or professional washing water.

Assembling. Or take the whole pile of what you took apart and hand it over to the repair point. Let the repair point clean and assemble it again for you.

After the phone is flooded, please do not try to turn it on or press the power off button. Wipe off water stains on the surface of your phone, then place your phone in a highly absorbent environment (e.g., activated carbon, rice, moisture repellent) for 48 hours.

Try turning it on after drying. If some functions are missing after normal boot, such as the keyboard light does not light up, or the screen touch does not work, etc., hardware failure may occur, please contact customer service or bring the purchase invoice to the service outlet for maintenance. If your mobile phone gets into liquids such as coffee, cola, milk, seawater, etc., please send it to a service branch for repair as soon as possible.

No matter what kind of water the phone falls into, you should first remove the phone battery and no longer power the phone. If it falls into clean water, remove the battery and clean the phone with anhydrous alcohol, because the alcohol volatilizes quickly, and the water on the circuit board can be volatilized together. Then use a heat gun or hair dryer to dry the circuit board, and then power up the test machine, and most mobile phones will work normally.

If it falls into the sewage, it should be cleaned immediately, and the dirt that can be seen should be cleaned first. Use a brush to brush off the impurities attached to the pins of the components. Then, the circuit board is scrubbed with an alcohol cotton ball, and if the pollution is serious, the impurities must be vibrated out with the help of an ultrasonic washing instrument.

Then use an air gun to dry the circuit board, and then repair all the chips.

Water ingress and crashing are the two major taboos in the use of mobile phones, and water ingress of mobile phones is particularly serious. According to an engineer from Guoxin, after the mobile phone gets into the water, the first thing to do is to turn off the power, of course, not to press the shutdown button, but to remove the battery. Because as soon as you press the shutdown button, the mobile phone will be powered on, and it is likely that a short circuit will occur, causing damage to the mobile phone, and then send it for repair as soon as possible.

If your phone's warranty has expired and you don't want to send it for repair, you can boldly take it apart! Wipe the parts of the phone with a tissue, and then blow it with a hair dryer for a few minutes, in order to ensure that all the internal parts are dry, it is advisable to air dry the phone for a few more days before you can turn it on again.