How to complete a Rubik s Cube in 1 minute

In fact, if you know the primary gameplay, and you can enter the time you are talking about if you are proficient, but if you still want to be fast, that is, within a minute or even 30 seconds, then you have to learn advanced gameplay, that is, CFOP, this is a method used by most masters, this method is a total of 119 standard formulas, if you can memorize and use it proficiently, 13, 14 seconds is no problem, I am now about 17 seconds, there is still a lot of room for improvement, However, it is very uncomfortable to memorize more than 100 formulas, you can memorize half of them first, which is the so-called syllogism, you can go to the Rubik's Cube bar to see, which has gathered domestic first-class masters, and you can learn from them! I wish you to become a Rubik's Cube master soon!

In fact, the ordinary layer can break through 1 minute if you are proficient in the first method.

It's available in the Rubik's Cube station.

After you are proficient, you should practice f2l oll pll to practice more, not more practice, and the regression will be very fast.

You can also go to the Rubik's Cube and talk to everyone more.

I used to play it, but I didn't stick to it, and now it's just going to restore, and I can't ask for speed.

A lesson from the past, practice more, don't give up, and you can become a master.

You can go to the Rubik's Cube station, and if you want to break through 1 minute, you can easily reach about 55 seconds by practicing OLL and PLL.

Also, F2L is very important, but I think it's more difficult to practice. Like it was said upstairs, this is the difference between a novice and an expert.

I raise crossing

There is also F2L, which is the boundary that separates the master from the novice.

Practice more.

The first step of the Rubik's Cube is to spell out the underlying cross flower, and the operation method is as follows:

Tool: Third-order Rubik's Cube.

1. Take out a scrambled Rubik's Cube.

2. The Rubik's Cube has 6 sides, namely yellow to white, red to orange, and green to blue. Generally, white is the ground and yellow is the top surface. Now look for the side of the yellow center block to put together a small flower.

<>5. The second petal is put together and then the third petal is spelled.

6. Finally, the fourth petal is put together, and the first step of restoring the Rubik's Cube is completed.

The third-order Rubik's Cube completely restores the formula:

Clause. 1. Make a white cross;

Clause. Second, the first layer of formulas: right, up, right, up, right, right, up, up, right, right;

Clause. 3. The second formula: right, up, right, up, right, right, up, right

Clause. Fourth, the second layer of the formula is reversed: right inverse, upward inverse, right inverse, upward inverse, right inverse, upward shun, right shun, right shun;

Clause. Fifth, the third level of formula: right, up, right, up, right, right, up, up, right.

Questions. Thank you.

The Rubik's Cube tutorial step by step** is as follows:

Tool: Second-order Rubik's Cube.

1. First restore the bottom corners: this step is to restore the 4 corners of the bottom layer.

2. Use algorithm 1 to the right for white, turn to the right first, r u r2 r u r2.

3. Use algorithm 2 for white forward, turn the front first, f2 u2 f u f2 u2 f.

4. Repeat 4 corner blocks, and you can do a good job of the bottom layer.

5. Then restore the top color: this step is to restore the color of the top surface of the 4 corner blocks.

6. Situation 6 is to use formula 2-2 first, in other cases use formula 2-1 first, and in other cases use formula 2-1 first.

7. Then restore the top layer of the corner block: if there is a situation like this, rotate the corner block of the same color to the position facing you.

8. Use this algorithm again: r b2 r f2 r2 b r f2 r2 r2, and you can complete the restoration.

The tutorial of the Rubik's Cube is taught step by step as follows:

Method Steps: 1. Up: Move the layer on the right-hand side upwards.

Bottom: Move the layer on the right-hand side down.

Left: Turn the upper layer to the left (i.e., clockwise).

Right: Turn the upper layer of the world to the right (i.e. counterclockwise).

Forward Forward: Rotate the front (i.e., the layer close to us) clockwise, similar to twisting upward.

Forward Reversal: Rotate the front (i.e., the layer that is close to us) counterclockwise, similar to twisting downward.

The bottom layer plus the first side.

1) First put together a cross with the yellow center block as the center and four white edged blocks as the edge.

2) Rotate the cross layer and find a central block corresponding to any white edge.

3) Rotate the front layer (not the top layer), which is the side of the green center block on the right in the image above, downward, and rotate it as follows:

4) According to this method, rotate the other three sides, and when completed, the original bottom layer, that is, the layer with a white center block, can be turned into a white cross.

5) Take the white cross surface as the bottom layer, look for the white corner block on the top side (that is, the side with the yellow center block), the corner block has other two colors in addition to the white side, rotate the top surface so that the corner block is placed between the corresponding two color surfaces, this picture is green and orange two color surfaces. Note: If there are no white blocks on the top side, the other four (i.e., side) white blocks should be moved up.

6) Put the orange side on the right and the green side in front, start the formula: up, left, down right, cycle three times, then you can move the white block to the white cross surface and fill in the cross corner block.

1. First of all, the four sides of the restoration center of the fourth-order Rubik's cube and the four squares in the middle of the surface.

2. Prism and ruler draft early stage: that is, there should be two colors and intermediate samples next to it, forming six colors of the same, and the center color of the other sides should be the same.

3. Next, use the conventional method of solving the second-order Rubik's cube, and take white as an example.

4. Assemble the white one-side, and you will find that the bottom one is also spelled out.

5. Then, use the solution of the third-order Rubik's cube to restore the second, second, and third layers of the Rubik's cube to the number of originals.

6. Finally, you will notice that a cross will appear at the top of the Rubik's Cube.

7. Use the third-order solution to complete the yellow side.

8. The restored appearance.

<> Rubik's Cube structure.

Rubik's Cube Restoration Seven Steps:

1.The first step in restoring the Rubik's Cube is to choose a noodle that you want to put together at the beginning (that is, which color you like, first put together the 9 pieces of that side), this step is not to put it together, but to spell out a cross. Although it is called the bottom surface, it is more convenient to observe this side up after restoration, but because steps 3-7 of the formula are all face down, I call it the bottom surface.

2.This step is to restore the four edges in the middle layer (just care about the edges!! This step is the opposite side of white, first look at the color of the top surface (that is, the color of the center block of the top surface), and then find the one without this color in the four edges of the top layer, if you find it, then turn the edges of the third layer to the surface of the corresponding color, and then see what color this block is on the top surface (it can only be the color of the left surface or the color of the right surface).

3.If you want to return to the left, break him to the right, if you want to return to the right, break him to the left, then use a small white block (the color of the bottom) to go out first, take it, and come back. This step in the Rubik's Cube station is called "far cut back, pick up the child from school", which is not reflected in the formula, but when you actually screw it, you will find that the first 4 steps send the child to the "school" (far away), and the last four steps turn the Rubik's Cube to pick up the child, and then the two blocks together "go home", which is quite vivid, "far cut back, pick up the child from school".

4.You only need to observe the edges on the top surface (the corners don't care), so the example of this step is replaced by a plan view (the top surface). There is still only one formula for this step, but for different cases, you need to use the formula 0 3 times to restore.

5.The purpose of this step is to make the color of the top 9 blocks consistent.

6。At the end of the fifth step, the top color is correct, but the 9 colors of the top layer are not necessarily right, this step is the intermediate process, the purpose is to make the top layer only the edges are wrong, and the corners are right.

7.Finally, adjust the color blocks on the edge to the corresponding position.

The handicapped party refers to the steps that can be learned, I hope it can help you!

Idea: Rubik's Cube Restoration Steps.

1.White cross on the bottom face: Restore the bottom 4 edges.

2.The bottom is all white: restore the bottom 4 top corners [method: right and left hand formula] <>

3.Restore the 4 edges of the second layer [Method: Invert T Formula].

4.A yellow cross is formed at the top [Method: Cross Formula].

5.The top forms a full yellow [Method: Small Fish Formula].

6.Restore the top 4 top corners [Method: Eye Formula].

7.Restore the top 4 edges [Method: Window Formula].

Note: Before using the formula, be sure to adjust the corresponding position according to the diagram.

Hope it helps!

In the Rubik's Cube Puzzle Puzzle Strategy, letters will be used to indicate the 1 layer or 1 side to be rotated, as well as the direction: for example: r (represents the right side clockwise 90 degrees), r (represents the right side 90 degrees counterclockwise), r2 (represents the right side clockwise 2 times 90 degrees) clockwise and counterclockwise determination only needs to face that side to draw a clockwise circle.

Choose any side to be the top cross, we choose white, be sure to ensure that the color of the side block 1 and the **block 2 is consistent. In order for the side block 3 to go where it should be, it needs to rotate 180° on the right side, which is the equation r2. By one side, we mean that all the top faces are the same color, and the adjacent edges of the top surface must also be of the correct color, i.e. the same as their respective center blocks.

The image above is an example of the wrong side, the color of side 1 and side 2 should be orange, and the color of side 3 should be yellow.

To complete one side, you only need to memorize 2 formulas, and you only need to transform the right side and bottom surface to complete.

When you get a chaotic Rubik's cube and don't know where to start, the first thing to remember is that the center block of each side of the Rubik's Cube is fixed and cannot be moved. The following is an introduction to the restoration method of the Rubik's Cube in the process.

Material tools.

Rubik's Cube. Method.

Start by preparing a shuffled Rubik's Cube.

Please click Enter a description.

Please click Enter a description.

Then restore the bottom of the Rubik's cube, that is, the same color is the bottom, and the bottom layer of the four sides is the same color.

Please click Enter a description.

Please click Enter a description.

Place the side of the same color at the bottom, and then the color in the middle of the second layer of the four faces corresponds to the same color as the bottom layer.

Please click Enter a description.

Please click Enter a description.

The two colors exposed in the middle of the top layer correspond to the sides of the second hole blind locust layer.

Please click Enter a description.

Please click Enter a description.

Then, according to the mantra, go down left, left down, bottom right, up right, or down right, bottom right, bottom left, top left, and restore each side of the second layer to the same color.

Please click Enter a description.

Please click Enter a description.

In accordance with the mantra, the front right, the god world right upper, upper left, lower right, upper right, front left, form a cross.

Please click Enter a description.

Please click Enter a description.

Press the mantra, top right, top left, bottom right, top left, top right, top left, bottom right. Unify the color of the top layer.

Please click Enter a description.

Please click Enter a description.

According to the following two formulas, the top layer, the four corners of the outer four friends are also restored to the same color. Upper right, back right, top right, front right right, lower right, back left, top right, front right, top right.

Please click Enter a description.

Please click Enter a description.

According to the formula, restore the top layer, top right, top right, top right, top left, top right, top left, top right, top right, top right, top right, top left, top right, top right, top left, top right

Please click Enter a description.

Please click Enter a description.