Table tennis balls can not be held with both hands at the same time

Yes, (there is no rule that 2 rackets are not allowed), and "Table Tennis World" once introduced 2 rackets.

Table tennis has no restrictions on the size, volume, or shape of the racket, (see racket rules below).

4 rackets. There is no limit to the size, shape and weight of the racket, but the bottom plate should be flat and hard.

The thickness of the base plate should be at least 85 natural wood, and the adhesive layer of the reinforcing base plate can be made of fibrous materials such as carbon fiber, glass fiber or compressed paper, and each adhesive layer should not exceed the total thickness of the base plate or millimeters.

The surface of the racket used to hit the ball should be covered with a layer of ordinary granular glue with outward particles, and the thickness of the adhesive should not exceed 2 mm; or cover with sponge glue with particles inward or outward, together with adhesive, with a thickness of no more than 4 mm.

"Ordinary granular rubber" is a layer of non-foaming natural rubber or synthetic rubber, the particles of which must be distributed over the entire surface at an average density of not less than 10 and no more than 50 particles per square centimeter.

"Sponge glue" is to cover a layer of foam rubber with a layer of ordinary granular glue, and the thickness of the general granular glue does not exceed 2 mm.

The covering should cover the entire surface, but not beyond its edges. The part close to the handle and the finger grip can be left uncovered or covered with any material.

The base plate, any interlayer in the base plate, the covering and the adhesive layer should be a whole of uniform thickness.

The racket must be matte on both sides, with or without covering, and be bright red on one side and black on the other. The edging on the edges of the body should be matte and not white.

Accidental damage, wear or fading can result in slight differences in the integrity and color consistency of the surface. As long as there is no significant change in the performance of the paddle, it can be used.

At the start of the game and when the player needs to change the racket, he must show the opponent and the referee the racket he will use and allow them to inspect it.

Yes, I'm a professional player.

You can use both hands, and you can change it with your left and right hands, and there is no requirement for the shape of the bat, but there is a certain limit to the size. It needs to fit in a box of the specified size.

In the absence of a game, you can, as long as you can, it doesn't matter if you hold 100.

Double rackets are okay, the table tennis rules don't say fouls, but I've never seen ......

I really don't know this, it seems that I don't know enough about the rules of table tennis.

No, the racket is less likely to break, but it usually breaks the bottom plate and the racket is unusable.

Table tennis rackets. It is composed of three parts: base plate, rubber and sponge. The proper combination of the three determines the quality of a racket.

We often refer to terms such as table tennis rackets and sponges, such as: "speed", "control" and "elasticity", "soft and hard base", etc. In fact, these indicators do not have a unified value in the industry, but the major manufacturers divide themselves in order to be able to learn from consumers when purchasing.

There are two commonly used types of table tennis rackets, straight and horizontal. The advantage of the straight board is that the attack speed of the near platform is fast, and the forehand and backhand change quickly, while the disadvantage is that the backhand is a weakness, because the backhand cannot be attacked, and the defense is the mainstay.

In recent years, China has invented the technology of straight board horizontal play, that is, to hit the ball with the back of the straight board, which is often unexpected, and can pull out the arc ball. Straight boards are easy for us amateurs to get started, but playing straight boards requires a flexible pace.

Of course, you can, but it depends on the occasion. If it's for fun, there's nothing wrong with that; If it is in a more formal table tennis game, this is an invalid catch, whether the ball is received back or not, it is regarded as a lost ball.

In table tennis, there are very clear rules in this regard. An effective catch is to hold the racket in your hand and use the racket or below the wrist to block the ball back.

In other words, if the ping pong ball happens to hit the finger and is blocked, the ball is also effective. The premise is that you use the hand holding the racket and that the racket has never left your hand.

Table tennis matches.

So the answer to your question is very clear, in the case of the racket has been taken out, no matter how you use to block the ball back, it will be ineffective. If the ball is blocked back and the racket is out of hand, this is valid.

To put it simply, the racket first takes off and then hits the ball, which is invalid; It works when you hit the ball first and then the racket comes out of your hand.

In the history of table tennis, there have been athletes who used slippers on their feet instead of rackets to play the ball. It's a joke, not a regular game. There are also some claims such as so-and-so that he can win with a bank card, but they are just talking.

None of this is possible in a regular game.

Summary. Hello! Table tennis rackeers are not allowed to touch the table!

Table tennis catches are theoretically not allowed to touch the table. In particular, the other hand that does not hold the racket should not touch the table. International table tennis regulations:

1. Whenever a contestant cannot touch the table with a non-gripping hand, touching the table is considered a violation. The soldier serves the ball, and the body is not allowed to touch the table, otherwise it is a violation! The soldier serves the ball, and the body is not allowed to touch the table, otherwise it is a violation!

When playing, in addition to the racket hand can touch the table, non-clap hands can not touch the table, otherwise it is a violation of the rules, if the racket in the racket hand falls out of the hand, at this time the hand is also a non-clap, can not touch the table. Otherwise, it will be judged a violation!

Hello! Table tennis rackeers are not allowed to touch the table! Table tennis catches are theoretically not allowed to touch the table.

In particular, the other hand that does not hold the racket should not touch the table. International table tennis regulations: 1. Participants cannot touch the table with their non-gripping hands at any time, and touching the table is considered a violation.

The soldier serves the ball, and the body is not allowed to touch the table, otherwise it is a violation! The soldiers serve, Lao Kai's body can not touch the table, otherwise it is a violation! When playing, in addition to the racket can touch the table, non-clappers can not touch the table, otherwise it is a violation of the rules, if the racket in the racket hand falls out of the hand, the hand is also a non-clapper at this time, and the liquid orange can not touch the table.

Otherwise, it will be judged a violation!

As long as the ball does not hit the ground during the game (no winner or loser), any part of the body touching the table will be judged to be a loss of comic spines. The general criteria are: whether 1 is in the middle of the game, and whether the 2 balls have landed (i.e., whether the winner or loser is separated).

1. If it is a direct shot near the fast attack, when holding the racket, use the index finger before the shot.

The first and second knuckles and the first knuckle of the thumb are placed on the shoulders of the racket; After the racket, the middle finger, ring finger and little finger are naturally bent, and the side of the first knuckle of the middle finger is used to resist the racket, which can be called the middle pincer grip method;

2. If it is a curved ball-based style of play, when holding the racket, before the racket, the thumb is close to the left side of the racket handle, and the index finger buckles the racket handle, forming a small ring with the sedan chair; After the racket, the three fingers naturally bend against the middle of the racket;

3. If you cut the sail of the racket straight, bend the thumb and stick to the left side of the racket handle, and the other four fingers will naturally support the back of the racket.

4. If you use a horizontal racket, the grip attack and slashing method of evoking it will change slightly, but the basic grip method will not change much. Tiger's mouth sticker, index finger.

Straight Grip The Straight Grip is characterized by flexibility, fast shots, fast and powerful forehand attack, and when attacking oblique and straight balls, the paddle surface does not change much, and it is difficult for opponents to judge. The backhand can be both pushed and smashed.

Chipping Ball Playing The thumb is bent close to the left side of the racket handle, press down firmly, and the other four fingers are naturally separated and supported behind the racket.

Fast-break style of play: Use the second knuckle of the index finger and the middle of the thumb to buckle the beat, and bend the three fingers to the upper end of the beat.

Horizontal grip method.

The horizontal grip method is characterized by the large power of the forehand and backhand attack, the small change in the grip when attacking the ball, and the easy force of the backhand attack and the easy to pull the arc circle; However, when hitting the ball alternately with the forehand and backhand, it is necessary to change the batting racket surface, and the amplitude of adjusting the racket shape when attacking obliquely and straight lines is large, which is easy to be seen by the opponent. It is not as flexible as a straight shot but has a large care surface, and the handling of the ball in the table is not as flexible as the straight shot, and the holding ability is high.

Note: 1) Regardless of the grip, the grip should not be too tight or too loose. Too tight will stiffen the wrist and affect the wrist movement when exerting force, while too loose will affect the power and accuracy of the shot.

2) The grip should not be too shallow. When holding straight, the pincer formed by the index finger and thumb should not be too large or too small, so as not to affect the flexibility of the wrist movement.

3) When changing the surface of the shot and adjusting the angle of the racket, it is necessary to make full use of the role of the fingers.

4) The grip method should not be changed frequently, otherwise it will affect the formation of the type and style of play, especially for beginners.