I love how much the machine for washing sweet potatoes invented was

Roll the sieve with water in and out at the same time.

The price of the automatic sweet potato machine is different, if it is a little cheaper, the list will be more than 9,000 yuan, and if it is expensive, it will cost tens of thousands of yuan.

This is not necessary depending on your model and size**.

If it is small, it is about 3,000 yuan for one unit, not including supporting equipment. Under normal circumstances, the manufacturer will be equipped with at least two machines, a cleaning machine, which is used for cleaning and feeding, secondary washing, and a powder machine, which is used for grading and crushing, separation and filtration. Of course, there is also an all-in-one powder machine, and it is fully automatic, without manual operation.

** It is also more expensive. It can be based on your budget

Hello, I am Ruyang County Machinery Factory, Henan Province, we have been producing potato processing equipment for many years, and the equipment for small processing of 1 ton of sweet potatoes per hour is about 1,000, including potato washing, refining separator, vermicelli vermicelli machine, etc. 3-4t h 5-6t h 7-8t h 10t h of the plant equipment This is the amount of sweet potatoes processed in an hour.

Hundreds of thousands to millions. But I don't know how much output you need, Kaifeng Sida Equipment Company provides 5 tons per day, 10 tons. 20 tons all the way up to 100 tons of starch equipment per day. Provide a full range of investment analysis.

It needs to be decided according to the daily output and use needs, such as a simple production line: sweet potato cleaning machine: 4000 plus a sweet potato starch machine:

5000 ；Slurry separation is required after cleaning. This simple price is less than 10,000 yuan. A basic 6-meter production line with a daily output of 5 tons to 8 tons can be satisfied.

In addition, the material is also different, divided into high and low configuration, and the specific ** needs to be analyzed in actual situation.

To understand how much sweet potato starch is, we must first be clear about our basic conditions and basic requirements. The main thing is the size of the yield, the process selection, the equipment configuration, and the quality of the starch required, as well as what you will use the starch for in the future.

Specifically, there are different influencing factors for sweet potato starch processing equipment, mainly depending on the following aspects: first, the size of the processing volume, the small processing volume is generally less than 5 tons per hour, and the large processing volume is generally more than 10 tons per hour, and the design of the production line with a small processing volume and the production line with a large processing capacity is very different, not just the superposition of output; The second is the processing technology used, at present, there are mainly simple processing methods, mainly to produce semi-finished wet starch, economic semi-automatic processing methods, the production of dry starch but the traditional precipitation method, the other is the automatic processing technology, from the entry of sweet potatoes to the output of finished starch one-stop production, these processing techniques, in the case of the same output, the difference is also very large; The third is the configuration of the equipment used, there are low configuration and high configuration, the low configuration part of the equipment is made of carbon steel, and the high configuration is mostly made of stainless steel; Fourth, the manufacturer of the equipment provides the factor, which involves the manufacturer's production qualification, production capacity, equipment quality and after-sales service.

In short, the best level of sweet potato starch processing equipment depends on a number of factors, ranging from tens of thousands of yuan to several million yuan, and the owner mainly decides according to his own situation.

The first is to instruct yourself on how much capacity of the machine you need, and then choose the degree of mechanization, the traditional processing methods include sedimentation tank, acid slurry method. The modern industry is a swirl processing industry, to put it bluntly, there is no need for a sedimentation tank, and the sweet potato has a high degree of mechanization and is formed at one time from the machine to the dry starch. During the time period, there are few people, and the dry starch is directly produced, which is clean and hygienic.

Again, according to the allocation and utilization of their own funds, they choose to query the sweet potato starch equipment through the network in Kaifeng, Henan, listen to the **, go to the field to see the sweet potato starch equipment, and make a comparison of choices**.

Sweet potato starch production equipment ranges from tens of thousands to hundreds of thousands of millions, which are affected by the four major factors of process, output, configuration and material. Kaifeng Star, focusing on starch equipment for 22 years, based on the development status of China's starch industry, summarizes and absorbs European advanced processing technology, and backing from strong R&D and operation strength, constantly breaks through innovation, and independently develops domestic advanced mechanized sweet potato starch production equipment after years of improvement.

The whole starch production line smoothly produces high-quality fine powder, and it only takes 45 minutes from feeding to drying.

Kaifeng Sida, 22 years quality assurance.

How much is a set of production lines for sweet potato starch processing equipment, first of all, we must figure out our own production volume and requirements. If the amount is small, you can use the simple type, which is not very high. If the volume is large, a high configuration is required.

The specific production line is mainly determined by the size of the output, process selection, equipment configuration, and the required starch quality, including what you want to use the starch in the future. The specific amount depends on the following aspects, and these aspects are considered clearly, and ** will naturally come out.

1. The size of the processing amount. The small processing volume is generally less than 5 tons per hour, and the large processing capacity is generally more than 10 tons per hour.

2. The processing technology used. At present, there are mainly simple processing methods, mainly to produce semi-finished wet starch, economic semi-automatic processing method, the production of dry starch but the traditional precipitation method, the other is the automatic processing technology, from the entry of sweet potatoes to the output of finished starch one-stop production, these processing technologies, in the case of the same output, the difference is also very large;

3. The configuration of the equipment used. There are low configuration and high configuration, the low configuration part of the equipment is made of carbon steel, and the high configuration is mostly made of stainless steel; Fourth, the manufacturer of the equipment provides the factor, which involves the manufacturer's production qualification, production capacity, equipment quality and after-sales service.

In short, the best level of sweet potato starch processing equipment depends on a number of factors, ranging from tens of thousands of yuan to millions of yuan, and the owner mainly makes a reasonable choice according to his own situation.

What you said should not be called "dried sweet potato", but "preserved sweet potato".

Process flow: Washing potatoes, peeling, dicing, hardening, sugar boiling, maceration, sugar control, baking, whole packaging. Choose the machine according to the process.

Because there are few manufacturers that directly provide this set of equipment, it is very troublesome to choose equipment. I don't know how big your investment is and what your daily processing capacity is. A full set of equipment can cost a lot of money for the baking program.

The Chengdu branch of Sichuan Agricultural and Sideline Products Processing Technology Development Company should have information on this, and you can contact them. As for the market, there is definitely a market, and the key is how to enter. Think of the dreaded entrance fees to the supermarket.

How large the output, the material must be food-grade 304 stainless steel. Mature technology, technical service consultation.

If you want to find a steamed sweet potato vermicelli machine, it is recommended that you go to Keyi.com