The speed of the machine is slow after starting, and it may solve the problem after restarting

Rebuild the system and find a better antivirus software. Clean up junk files frequently.

You have to run in the beginning first" Enter msconfig to select the startup to remove unnecessary startup projects, and then see if there are any suspicious startup projects, the most important thing is to disinfect the virus, and you need regular anti-virus, right? By the way, it's better to be in safe mode, good luck

The upstairs talk about cleaning up junk files does make sense, but I recommend not using software to clean them, after all, sometimes you delete the wrong things, and it's not a panacea, so be careful

This phenomenon is generally caused by the memory module being used for too long, the actual material of the gold finger on both sides is copper, the surface is oxidized, and the contact is poor, you can open the case, unplug the memory module and wipe the gold finger on both sides with an eraser, and then install it.

Use 360-degree security guard to remove rogue software, and, antivirus.

Also, if you are afraid of deleting the wrong things, I recommend you to use Rising Card Security Assistant to clear the rogue software. The guy upstairs doesn't work, the rogue software doesn't clean, the content of the startup item can't be deleted, and even if it is deleted, it doesn't work, and the rogue software still runs.

Make a mirror image and reinstall it.

It is best to open the main case and clean it with a brush.

Close unnecessary startup projects! Unplant the rogue plugin again! That's it!

Drop your computer downstairs.

1.It is recommended to clean up the boot startup items that are not useful. You can open Kingsoft Guardian and use the Guardian system to optimize the cleanup. You only need to keep the input method, dialer and your antivirus software for boot startup.

2.It is recommended that you clean up your junk files. Too many junk files can also have an impact.

3.If you don't use a printer, scanner, or other device, you can right-click on My Computer and click Manage to find the services in Services & Applications. Locate the print spooler item and set the startup type to Disabled.

4.We recommend that you turn off the Security Center service for your system. Open Control Panel - Open Administrative Tools - Open Services - Find the service named "Security Center" - Double-click on the service to open the property settings.

Set the startup type to "Disabled."

5.Right-click on My Computer, select Properties - Advanced - Performance - Set in Visual Effects you only check, Use Common Tasks in Folders and Use Shadows for Icon Labels on Desktop and Use Visual Styles on Windows and Buttons.

6.Right-click on my computer and select Properties - Advanced - Boot & Recovery - Settings - check off all the options in it, and only keep the time when the list of operating systems is displayed.

7.Cancel all useless boot software.

Too many loaders, or a large number of files on your desktop, can cause a slow startup

You put too many things on the C drive and desktop, or you boot up too many items. Delete the useless things on your desktop, put some things in the C drive to other storage drives, use 360 to view your boot startup items, and close unnecessary things.

There are several reasons why your computer is running slow when it is turned on:

1. There are too many startup projects loaded;

2. There are too many disk fragments;

3. Infection with viruses;

4. The hard disk has bad sectors.

Solution: 1. Use anti-virus software to check and kill viruses to ensure that the system is free of viruses.

2. Run the disk defragmenter to defragment the disk and eliminate the disk fragmentation.

3. Clear startup items: Start Run Enter msconfig OK The "System Configuration Utility" window pops up Select the "Startup" page, remove the hook in front of the unnecessary startup items (ctfmon entries are kept, this is the input method icon of the taskbar) Apply OK.

Try moving. You can also check whether the First Boot Device is HDD-0 in the Advanced BIOS Features menu of the BIOS

The screen appears: Disk Boot Failure, Insert System Disk and Press Enter.

Troubleshooting: After entering the CMOS settings, select the "IDE HDD Auto Detection" item to see if it can be detected.

to the presence of the hard disk.

If no hard drive is detected. The first thing to consider is the hard disk, which can be done by listening to the sound of the hard disk or connecting the hard disk to it.

His computer came up to determine if there was a problem with the hard drive. If there is a problem with the hard disk, the data on the hard disk can be found for special data.

recovery companies to recover; If you can detect the hard disk correctly, please check the capacity of the detected hard disk and other requirements.

Whether the parameters are the same as those of the actual hard disk. is the same, indicating that the system should be normal, probably just in CMOS.

The setting information of the hard disk parameters is lost. Different, it means that the system must be faulty, it may be a fault of the motherboard, too.

It is possible that the hard drive cable is faulty.

2.Reason: (1) The hard disk and optical drive are connected to the same data line, and the jumper is set as the master disk (or both are set as slave disks).

2) The CMOS hard disk parameter is set to none

3) Main boot sector end flag 55aah error.

Processing: (1) Set the CD-ROM jumper to a slave disk (or the hard disk jumper to the master disk).

2) Reset CMOS

3) Repair with NDD's "Diagnostic Disk".

Slow startup is too many boot startup items, it is recommended to turn off the boot startup items of the program that are not commonly used, and a blue screen appears, see if there is a problem with the system, reinstall the system to see if it can be solved, if there is a problem with the hardware, you have to repair it.

Start from the following aspects, poisoning, heat dissipation, software conflicts, and wrong drivers.