M I fully intelligent measurement and control instrument manual

Due to all kinds of rechargeable batteries.

It is a reusable power source of the service equipment, and its performance will directly affect the normal operation and performance indicators of the equipment. Therefore, it is important to detect and understand the actual performance of the battery to ensure the normal operation of equipment and systems.

The most important performance of a battery is the characteristics of its charging and discharging processes. Such as effective capacity, cyclic charge and discharge life, internal resistance, dynamic characteristics, consistency characteristics, polarization effects, etc.

Therefore, in order to test the comprehensive performance of the rechargeable battery, it is necessary to provide a simulated charging and discharging process for the battery to be tested, and collect various parameters of the battery to be tested during the charging and discharging process. In the process of charging and discharging, there are not only voltage control, current control, time control, but also commutation commutation control and temperature control, and at the same time, real-time data transformation, data processing and data management should be carried out on the collected data.

Coupled with the long measurement process, which can range from hours to months, manual measurement methods with conventional instruments or equipment are extremely laborious and almost impossible to use for actual routine inspections.

In this paper, we will describe the principle and working process of IDTB (Intellt Detect & Testing for Batter), and then propose a technical scheme to implement IDTB.

It also illustrates the practical application method of IDTB and the idea of constructing multiple uses.

Two. Detection and testing principles.

Since the batteries used in electric vehicles are either maintenance-free or monolithically encapsulated, it is not possible to measure their internal parameters (e.g., reference potential, electrolyte.

concentration, gas evolution rate, etc.). In addition, when used in electric vehicles, we are more concerned about the various external output characteristics of the battery and various observable and measurable physical quantities that are closely related to the external output characteristics.

Such as capacitance, voltage, voltage rate of change, current, current rate of change, internal resistance, temperature, temperature rate of change, etc.

Work hard, the sky is still beautiful, the dream is still innocent, let go of yourself, fly bravely in the sky of your dreams, and believe that you will do better.

2. Life is a blooming flower, it blooms beautifully, stretched, and gorgeous; Life is a beautiful little poem, fresh and smooth, with a long meaning; Life is a beautiful music, harmonious and melodious; Life is a flowing river, flowing endlessly, rolling forward.

3. Taste life and improve human nature. Existence is an opportunity, and thinking can be improved. People need to constantly break themselves, and they should reassemble themselves.

4. I have been reading hard for decades, reading tens of millions of poetry books, working hard day and night, just for today's nomination. In the college entrance examination, the heart is stable, the skills are used, the calm is the mind, the calm is the mind, and the college entrance examination is treated as usual

Four Seasons Muge M-L Full Intelligent Measurement and Control Instrument Manual:

1. Four seasons Muge solar hot water bathing method:

When the water temperature in the water tank reaches the bath temperature, open the hot water valve or temperature control valve (sprinkler head) to make the warm water flow out for bathing, if the water flowing out of the sprinkler head is too hot or too cold, adjust it through the temperature control valve or cold water valve until the water temperature flowing out of the sprinkler head is suitable.

The steps of adjusting the water temperature of Muge Solar are: first open the cold water valve, properly adjust the cold water flow, and then open the hot water valve to adjust until you get the required bath, pay attention to the nozzle not facing the human body, so as not to burn.

2. The use of solar energy-assisted electric heating in Four Seasons Muge:

If the sun is weak in rain and snow, and the water temperature in the Four Seasons Muge solar energy cannot reach the bath temperature, you can plug in the power plug to assist in heating the water stored in the water tank, and when it reaches the temperature suitable for bathing, cut off the power supply and then use water.

As long as the "reset" button of the leakage protection plug is pressed during operation, the power indicator light is on (red), and the electric heating rod starts to work, press the "test" button, the power supply will be cut off, and the heating will be stopped. The electric heating device must be equipped with a leakage protection plug, and the power is off for bathing, and it is strictly forbidden to take a bath with electricity.

1. Water temperature and water level setting: press the "Preset" button first, and the current preset temperature. Preset the water level to beat quickly, and then press the "water up, water level" button to set the water level, press the "heating, water temperature" key to set the water temperature, please set the user to the desired water level and water temperature according to their own needs; It is recommended to set the water temperature not to exceed 60 C, which can make full use of solar energy, reduce electric heating and save electricity.

2. Timing control: When you need to regularly water or heat, press and hold the "water, water level" button or "heating, water temperature" keyboard, about 3 seconds to hear the "Di" short prompt tone and let go, the digital display "00", and then press the "water, water level" or "heating, water temperature" key to adjust the time, set the temperature or the circle pattern flashes.

3. Temperature control on water: according to different seasons and different sunlight, you can set the temperature control water function, press the "power" button to start the temperature control on the water, if you cancel and then press the power button to cancel.

Hope it helps!

There are lightning protection, leakage protection, standby function, etc.

The smart key is factory mode, and the settings are different for different manufacturers. Generally, the water is on at 4 o'clock to 50 water level, heated to 50 ° at 5 o'clock to ensure that the water is used for washing in the morning, water is on to 100 water level at 9 o'clock, heated to 60 ° at 16 o'clock to ensure that there is 60 ° water use at night, if it is lower than 80 water level at 15 o'clock, the water is replenished to 80 water level. Of course, the above time can also be adjusted, depending on what controller.

The thaw key is used to quickly thaw water pipes when they are frozen. The heat button manually heats the water to the temperature you want to use. Antifreeze may be to automatically heat the water and maintain a constant water temperature to avoid the water from freezing.

Of course, each button has other adjustment functions, and there should be other standards on the button that meet such as up or . This means that this button has other adjustment functions. It depends on what brand of solar water heater controller you are.

You can find instructions on the Internet for the same type of controller. This is somewhat helpful.

Friendly reminder: Don't forget to take the answer when you see the reply.

How to use this! Why is the water not hot, can you send me a manual?

The use of the solar water heater full intelligent measurement and control instrument is as follows:

Plug it in, press the on/off button of the electric water heater, and set the water temperature at the same time. In general, it is set at 45 degrees Celsius, but in winter, the temperature can be adjusted a little higher.

After the water boils, first adjust the valve to the middle position, let the water go, and test that the water temperature is not cool before starting to use. (Generally, the left side of the valve marked with the word H is hot water, and the right side marked with C is cold water.) Hot water is marked in red, and cold water is shown in blue. )

It can be used after the water temperature is constant, because the electric water heater is surrounded by water and is easy to be electrocuted, so try not to touch other places with your hands or other parts during use, especially around the power supply.

All-weather mode: According to the user's personal needs, within 24 hours a day, you can set the water supply three times in the morning, noon and evening, and the water level and temperature of the water supply each time can be set respectively.

The original factory setting is to start the water to 50% water level at 3:00 in the morning for the first time, and to start the heating to 50 at 4:00 to provide the user with water for washing after getting up in the morning, and the second time at 9:00

00 Start the water supply until the water is full, and do not heat it at noon, so as to use solar energy to provide heating as much as possible.

When the automatic controller leaves the factory, all the functions are set by the manufacturer, and they are generally set according to the use of the family, so don't worry about that, automatically water and automatic heating.

If you need to set it yourself, you can set it according to the text instructions on the controller, which is generally set to 60 degrees Celsius at the water temperature and 80 degrees at the water line. Once it's set, press start or leave it alone and it will start on its own.