Why is my computer s CPU temperature so high?

Clean the heatsink and fan from dust before replacing the grease. Check whether the CPU fan is running smoothly, if it is not rotating smoothly, remove the fan and remove the label on the back to add a small amount of lubricating oil to the bearing.

Open the case side cover and run the game for a while to see if the CPU temperature is normal.

If the problem is still not solved, then take a look below.

If cleaning up the dust and replacing the silicone grease are ineffective, then the culprit should be that the CPU heatsink is pressed too tightly.

Put the case flat, open the buckle of the CPU heat sink, don't close it, just boot the game like this, and observe Master Lu's CPU temperature display to see if the problem is solved.

If the temperature is normal after opening the fins, then remove the heatsink and adjust the buckles with pliers to make the buckles.

Reduce the downward pressure on the heatsink (simply don't let the clip press too tightly).

Because there are too many types of heat sinks, how to adjust them needs to be studied by yourself, which is not difficult.

The characteristic of this problem is that when entering the BIOS and playing large games, the CPU temperature continues to rise, and finally it automatically shuts down, while when entering the system and chatting on the web page QQ or something, the temperature is normal ......

This kind of problem has also bothered me for a long time. Later I solved it!! Put down the machine, put the radiator on the silicone on the CPU, pay attention to put it on it, don't buckle it.

You boot up and run the 3D game to try it out. If the temperature is resolved, you go and buy a CPU dock cushion and make some room for the CPU and heatsink to come out.

If you press it too tightly, the temperature will be very high, strange. Hehe!

Hope it helps!

Look at the fan, it could be a problem

There is a problem with the CPU fan.

It is recommended to clean the CPU fan, or use the home fan to blow on the host, and the best way is to change the CPU fan.

The most common is that the cooling fan is not working.

If the boot is normal, the temperature rises sharply after a period of use and then automatically shuts down, and it can be used normally after a while, the fault is repeated, congratulations to you, the hardware is basically no big problem. Just change the cooling fan.

**Processor:

**The CPU (Central Processing Unit) is a very large-scale integrated circuit, which is the computing core and control unit of a computer. Its function is mainly to interpret computer instructions as well as process data in computer software.

The processor mainly includes a combinator (ALU, arithmetic logic unit) and cache, as well as a bus that realizes the data, control and state between them. Together with internal memory and input and output (IO) devices, it is known as the three core components of electronic computers.

The normal temperature of the CPU.

It is generally stable in the range of 30 degrees Celsius. In other words, the CPU has a harvest temperature of 65 degrees, and the maximum temperature of the CPU is 30 degrees Celsius based on the maximum of 35 degrees in summer. And so on, if your ambient temperature is 20 degrees now, it's best not to exceed 50 degrees on the CPU.

Of course, the lower the temperature, the better. No matter how far you overclock, don't make your CPU more than 30 degrees above the ambient temperature.

It is normal not to be higher than 65 degrees. Generally hovers between 42---50. In summer, the CPU temperature can be slightly higher, and if the CPU temperature is too high, the computer will run slowly or restart.

The CPU temperature is high, 1, check the fan, 2, check if the thermally conductive silicone is dry. 3Don't overclock, set the CPU to the default frequency.

Generally, when the CPU temperature reaches 50 -60, it is easy to blue screen and freeze, and if it exceeds 80, it is very easy to cause the CPU to burn out!

Reasons: 1. Caused by overclocking, which is the work of the machine's excessive requirements.

2. Caused by electric fans, this is very common in our lives.

Such as: the fan is damaged, the fan is aging, and the fan has no oil and the speed is slow.

3. Problems between the CPU and the electric fan.

For example, there is too much or too little silicone, and the CPU and the electric fan are not close together.

Solution: Either change to a good high electric fan.

The second is to change the fan.

The third way is to change the fan.

CPU cooling tricks.

1) Check if the fan in the case is working properly.

2) Clean up the dust inside the chassis (the correct way is to blow the dust with a bicycle pump).

3) Be sure to add thermal grease between the CPU and the heat sink.

4) Drop a drop of sewing oil on the bearing of the cooling fan, which can effectively reduce the noise!Don't drop too much, just one drop.

5) If necessary, you can install a high-power CPU fan and buy a radiator with better heat dissipation effect, such as Kyushu Fengshen, etc.

6) Install a case cooling fan (be sure to buy a double ball bearing).

There is strong electromagnetic radiation in the chassis, which is harmful to the human body, it is recommended not to open the case cover for heat dissipation) 7) Move the main unit to good ventilation.

There are many reasons for this problem, usually caused by the CPU cooling fan, you can remove it and clean it up.

Another reason is that there is too much software running, you can try to close unnecessary programs, if it is AMD, it is normal to have a maximum of about 60 degrees.

50 degrees, the upper limit is 70 degrees, if you are afraid that the temperature is too high, you will change the silver powder, and the general machine is made of white silica gel.