Can I use a disc to reinstall the system How to reinstall the system with a disc

First of all, your chassis needs to have an optical drive.

Usually the computer will be equipped with a disc drive, which is convenient for users to use the disc to reinstall the system, especially in the case of a computer system crash that cannot be started, you can reinstall the system through the disc, the computer store sells the system CD, if there is a blank disc, you can also make your own system CD, many people do not know how to reinstall the system with the CD, the following will introduce you to the tutorial of reinstalling the system with a CD.

Reloading Instructions:

Reinstallation will delete all files on the C disk and desktop, we must prepare important data for the banquet, memory 3G and below 32-bit system, memory 4G and above 64-bit system, disc reinstallation system may be more cumbersome for Xiaobai, if the system can still be used normally, you can use a good installation of one-click auspicious book to reinstall the system.

One-click installation of local hard diskGhostXP Win7 Win8 Win10 system method is recommended

U disk PE quick installation XP Win7 Win8 Win10 system

1. Reload and prepare

1. Back up the C drive and desktop files.

3. System CD: The production method of the system CD.

4. Disc boot settings: how to set boot from disc (hotkeys and BIOS settings).

2. The steps to reinstall the system with a disc are as follows

1. Put the system disc in the computer CD-ROM drive, press the F12, F11, ESC and other startup hotkeys when restarting, select the option with cd or *** in the pop-up boot menu, and press Enter, if not these shortcut keys, refer to the above "CD Boot Settings" tutorial;

2. Boot from the disc to enter this main menu, press the number 2 or click option 2 to run the PE micro system;

3. After entering the PE system, if you need to repartition, you need to make sure that there is no important data in the hard disk, double-click [DiskGenius], click [Hard Disk] - [Quick Partition], and use this operation to ensure that there is no important data in each partition;

4. Set the number and size of partitions, the main partition is more than 35g, it is generally recommended to be 50g, click OK to execute the partition;

5. After completing the partition, double-click [Auto Restore Win7 to C Drive Imitation], pop up the prompt box, and click OK directly;

6. Enter this interface and perform the system decompression to the C drive, which may take about 5 minutes;

7. After completing the decompression, the computer will automatically restart, at this time, you can take out the system CD, and continue to reinstall the system after restarting, which also takes about 5 minutes;

8. The reinstallation process needs to be restarted several times, and after entering the new system desktop, the disc reinstallation system step is over.

That's it for the detailed steps of how to reinstall the system with a disc, if you need to reinstall the system with a disc, you can refer to the above steps to reinstall the system.

The computer must be installed with the system before it can be turned on and used, so once the system fails, the computer can not be turned on, and the system needs to be reinstalled when the computer cannot be turned on. This is for sure, when the computer does not have a system or can not be turned on, the system disc can boot the computer and perform the process of reinstalling the system.

Reloading Instructions:It is only applicable to computers whose system is damaged and cannot be turned on, and hardware damage can only be repaired. Reinstallation will delete all files on the C drive and desktop, you must back up important data, 32-bit system with 2G and below memory, 64-bit system with 4G and above.

1. Back up the C disk and desktop files.

3. System CD: The production method of the system CD.

4. Disc boot settings: how to set up boot from CD.

2. The steps to reinstall the system with a disc are as follows

1. Put the system disc in the computer CD-ROM drive, press the F12, F11, ESC, etc. boot hotkeys after restarting, select the option with cd or *** in the pop-up boot menu, and press Enter, if not these shortcut keys, refer to the above "CD Boot Settings" tutorial;

2. Boot from the disc to enter this main menu, press the number 2 or click option 2 to run the PE micro system;

3. After entering the PE system, do not use partitions to directly execute step 5, if you need to repartition, you need to make sure that there is no important data in the hard disk, double-click [DiskGenius], click [Hard Disk] - [Quick Partition], use this operation must ensure that there is no important data in each partition;

4. Set the number and size of partitions, the main partition is more than 35g, it is generally recommended to be 50g, click OK to execute the partition;

5. After completing the partition, double-click [Auto Restore Win7 to C drive], the prompt box will pop up, and click OK directly;

6. Enter this interface and perform the system decompression to the C drive, which may take about 5 minutes;

7. After completing the decompression, the computer will automatically restart, at this time, you can take out the system CD, and continue to reinstall the system after restarting, which also takes about 5 minutes;

8. The reinstallation process needs to be restarted several times, and the process of reinstalling the system on the disc will end after entering the new system desktop.

The above is the method of using the disc to reinstall the system when the computer can't turn on, when the computer can't turn on, you can boot it through the disc and then reinstall the system.

The computer cannot be turned on, you can use the disc to reinstall the system, the specific steps are as follows:

When the computer boots up, press the corresponding button to enter the BIOS settings. The specific keys may be DEL, F2, F12, etc., after entering the BIOS settings, pay attention to setting the boot order, let the disc boot take precedence over the hard disk, and then save the settings and exit the BIOS.

Insert the prepared system installation disc into the optical drive and restart the computer. The computer will recognize the disc and try to boot from it. If everything is normal, the system installation interface will be sleepy, and you can follow the prompts.

In addition, if you have a ghost backup on your computer, you can also reinstall the system through the ghost tool, the steps are as follows:

Install a ghost one-click recovery tool.

Open the tool and follow the instructions.

It should be noted that the steps to reinstall may vary for different computer brands and system versions, so it is recommended to consult professional technicians or consult relevant tutorials for operation.

Set the first boot item to a CD ROM, and then put it in the disc to reboot.

Press del to enter BISO and set the first boot project to CDROM. Then one-click installation.

Optical Drive Reinstall System (XP) Steps:

1. Prepare the CD-ROM, including: system, driver, application software. Backups of user data that need to be retained.

2. Press and hold the del until you enter the BIOS. Check in the BIOS to see if the optical drive boots first. If not, please modify. Then insert the system disc and reboot.

3. System, driver, application software installation. Generally, the D version and the ghost version can all be completed automatically. Finally, check whether the application software is installed, and if there is any omission, you can install it manually.

Set the CD boot in the BIOS first, then put in the cloned version of the CD, and click "Install System".

1.Boot into the BIOS settings cd *** drives boot (Dell notebook press F12 to enter the selection, desktop generally press the delete keyboard to enter), different computer brands to enter the BIOS keys.

Select Custom Installation (For the sake of installation order, it is best not to use upgrade installations, and they are not very commonly used.) ）

4.Disk partitioning、Formatting,When choosing to install the system, pay attention to the win7 system has a system reserved partition,System installation selection partition 2 is C disk。

5.Start installing the system, copy the window file, window file, install functions, install updates, and complete the installation.

6.During the installation window, the computer will be automatically restarted and the installation will continue, remember not to lose the power at this time, otherwise it will have to be relocated.

8.At the end of the installation, you will need to enter the username, password, serial number (which can also be activated after installation), time zone, country or region, etc.

First, this is a detailed tutorial.

II.1Start your computer and hold down the DEL key until the BIOS Setup Window 2 appearsSelect and go to the second item, find Advaced BIOS Features, hit enter, press the down key of the arrow key, move the cursor to the Hard Disk.

Press enter, press the arrow keys to move the box behind the cdrom press enter, at this point the first boot device has become cdrom.

3.After selecting the startup mode, press the F10 key, press the "Y" key, and press Enter, the computer will automatically restart, proving that the changed settings have taken effect. Step 2: Put in the system installation disc before rebooting, and press enter when you see the word cd appear at the bottom of the screen after booting.

Otherwise, the computer will start reading the hard disk, that is, skipping the optical drive and booting from the hard disk. After the system disk is turned on, there is an installation interface with a blue background, and the system will automatically analyze the computer information, and no operation is required until the installation is completed.

It's very simple,Put the installation disc in*** and then restart it.,You'll go straight to the installation interface.。

The disc is put into the optical drive, and after it comes out, there is an option to install it in the first partition, and then you don't have to worry about it (I use chost), and the installation is relatively simple.

Put the disc into the optical drive and restart the computer, and the optical drive will automatically read the disk.

Then press the 1 button to install the system automatically.

**There are detailed methods on it! Take a look! If you don't, ask me!

The machine I just installed is also stuck, and I'm distressed.

For you**: First of all, go into the BIOS and change the computer to a CD-ROM drive to boot.

After starting the computer and entering the above interface, press the "Delete" key to enter the interface below, move the up, down, left and right cursor keys on the left side of the keyboard, select the instructions in the following figure, select the effect of the above picture, and press enter to enter.

Do you see the place where the circle lives, press enter to enter, select the one shown in the figure below and then press the cursor to select cdrom, press enter to confirm.

Then press F10 to save.

After the computer restarts, the contents of the disc will appear, select 1, install Windows XP, SP3, to C disk (your interface should be different from mine.。。 However, it is also the option to install Windows XP SP3 to C drive. Generally the first).

Press Enter. It will automatically restart when it reaches 100%. After the reboot, the interface to install the driver appears.

After that, the system is automatically installed... As long as you make sure that the power is not interrupted during the installation... When it is installed, it will automatically enter the system, so that the system is installed...