Miscellaneous do ah, use Ps as an elephant, tell me shell 40

Create a new file in ps, if you make an avatar, the size should not be too large, it is best to set it according to the required size, and try to avoid changing the size after doing it.

The first step to do is to add a gradient effect to the white layer, first click on the left toolbar to set the front and back colors, according to your personal ** tone or your favorite color to find a personalized avatar background color tone, I chose the foreground color as white and the background color as blue (Figure 1), create a new layer, and then click on the gradient tool (Figure 2), pull from top to bottom on the white background, pay attention to the fact that the picture should be shallow up and deep down, so that it will be more comfortable visually, If it is the other way around, it will feel top-heavy (Figure 3).

Figure 3] Next, click "Filter", "Pixelate", "Mosaic" (Figure 4), the cell size can be seen in the preview box, the value is set according to personal preference (Figure 5), the gradient screen is divided into different shades. In order to make the picture more three-dimensional, we need to sharpen the picture, click "Filter" "Sharpen" "Sharpen", and the effect of other sharpening functions is the same (Figure 6), you can sharpen it several times as needed, and the final effect is as follows (Figure 7).

Open the personal ** and cut out the character, so I won't talk about the steps here, drag the character into the gradient image, and use CTRL T to adjust the proportion of the character in the picture (Figure 8). The general pattern of the picture has come out, but the picture is too quiet, and we added some beating notes to her.

Fig. 8] Click on the Brush tool, select the pattern, select the size and color (Fig. 9), and then tap each layer in the frame with the brush until you feel that the picture is full (Fig. 10).

Click on the bottom of the toolbar to enter ImageReady, we see that the picture we just made has been transferred here, and the animation toolbox for making a GIF appears at the bottom. Click "Copy Current Frame", copy as many symbols as there are layers, and set the symbols in different positions to appear on each frame by hiding the unwanted layers, such as clicking on the first frame, and then keeping a note layer on the layer, and the others are set to hidden. Next, set the interval between each frame (Figure 11).

Fig. 11] When saving the screen, it should be noted that the general ctrl s is not good, and if you want to save it in gif format, you must shift+ctrl+alt+s, so that the saved screen is still dynamic (Figure 12). In just a few simple steps, a clean and beautiful personality map is done, try it, it will be attractive as a signature picture of the forum!

As soon as iKang material comes out, the material and tutorial are out.

This is my own doing, if you are not satisfied, please understand, this silver technology is limited.

This is actually not difficult.,(I wanted to do it myself and send it to you.,But I found that the ps expired.,Oh, the trial version I used will tell you about it) First of all, you should understand the concept of layers.,It's two layers at a glance.,The avatar is on top.,The background is below.,(The reverse is also possible.)。 And then there's this background, where you draw a circle first, and then give him the color or something, or you can fill it with a gradient. Then add it to him"Glass style", if the glass style does not give force, you can add it to him"Layer style", relief, inner shadow, projection in the layer style, if you try it yourself, you will be impressed.

And then it's to show that kind of embedded effect.,This can be used to add a mask to the avatar.,And then erase the unwanted places.,If not,Just use the eraser.,Or use the selection tool to drag a circle out and then feather.,If the effect is not good, you can also set the transparency.。

Take your time and research it yourself.

I probably tried it, and after trimming the round avatar, double-click on the layer, and select Drop Shadow, Gradient Overlay, Stroke in the layer style.

Among them, the projection is the three-dimensional sense of the outer contour** The gradient superposition is the inner highlight effect, and the stroke is to enhance the contrast between the image and the background.

You try to pay attention to the choice of gradient method and the adjustment of opacity.

On, duplicate layer, turn off background layer. Draw a perfect circle with the elliptical marquee tool, invert the clear, and save the file in png format**-ok! According to your needs, use the rectangular marquee tool or cropping tool to make squares, rectangular images, etc.

First of all, you need to determine the size of the avatar, and then create a new file of the same size in PS (the resolution can be set to 72), and then open the ** you are going to make the avatar**,Drag it to the new document,If the size difference is too much,It's best to right-click**layer,Convert to a smart object,So that it will be much more convenient to scale later,It won't be distorted,The shortcut key for scaling** size is CTRL+T。

Then do it in the ps, and then export the jpg or png file.

Do it well with ps, it's powerful, I can do it for you if you need to.

The Meitu App. Light and shadow magic hand.

However, the Meitu App can sometimes be ruinous when it comes out.

But you'll have enough of the features you need.

Hey ( Use the Meitu Xiuxiu, cut directly to the size.)