What does it mean to be unable to connect to server 1302

1. Click [Start Menu] in the lower left corner of the computer to find [Control Panel] and click to open.

2. Enter the control panel interface and change the viewing method in the upper right corner to [Large icon].

3. Find [Windows Firewall] in the list below and click to open it.

4. Enter the firewall interface and click [Turn on or off Windows Firewall] in the upper left.

5. Enter the Windows Firewall interface, turn off the firewall, and then click OK to save.

6. Open the Internet Explorer, click the [Settings] option at the top left, and click [Internet Options] in the pop-up menu bar.

7. Enter the Internet Settings dialog box and click the [Advanced] option at the top.

8. In Advanced, find [Check whether the issuer certificate is revoked] and uncheck it, and then click OK to save.

The computer prompts that it cannot connect to server 1302, which is caused by a problem with the network settings in the computer, and the specific steps to fix it are as follows:

1. First, click the start button on your computer, and then click Settings in the start menu

2. Find the option of Device Manager in the settings interface that appears, and click to launch it:

3. Then click the Properties button in a new window

<>5. After that, return to the connection window, right-click and select the network card in the computer, and disable it, so that the computer will not prompt that it cannot connect to the server:

If you are unable to access the Internet while using data traffic, it is recommended that you check whether some or all of the software cannot access the Internet, if some of the software cannot access the Internet, please click Network Assistant or third-party security management software to check whether the software is restricted from accessing the Internet, if all the software cannot access the Internet, we recommend that you check whether the access point of the network is set correctly.

At the same time, it is recommended to change to the wifi network to try to operate, if the problem is still not solved, it is recommended that you back up important data first, and then enter recovery (shutdown, press and hold the volume + power on button to enter recovery mode) to clear all data, do not restore data for the time being after booting, directly ** software to try whether it can be used normally.

Unable to connect to server (1,302) with two issues:

1. Problems with mobile phones;

2. Network problems.

Solution: 1. Solution to mobile phone problem.

a. Restart your phone;

c. Disable the network and turn it back on.

2. Solution to network problems.

a. If it is a router, it is recommended to restart;

b. Change the name of the wifi (it is recommended not to use Chinese characters);

c. Change the signal to a better place (referring to the traffic of the server used);

d. Replace the router.

The computer prompts that it cannot connect to server 1302, which is caused by a problem with the network settings in the computer, and the specific steps to fix it are as follows:

1. First, click the start button on your computer, and then click Settings in the start menu

2. Find the option of Device Manager in the settings interface that appears, and click to launch it:

3. Then click the Properties button in a new window

<>5. After that, return to the connection window, right-click and select the network card in the computer, and disable it, so that the computer will not prompt that it cannot connect to the server:

The possible problems of the terminal are listed, and it is recommended to troubleshoot them one by one

Browser issues: Use Internet Explorer, don't use third-party browsers.

Caching issues: Clear your browser's cache as well as cookies.

Last time you went offline: Turn off the Wi-Fi switch for more than 15 minutes and try again.

If you are connected to wifi before and suddenly you can't use it, it shows that the Internet connection with poor signal has been disabled. Saved or something. First of all, open the settings >> wifi> click on the wifi you want to connect to, click on the wifi you want to connect, click on this wifi

After confirming that the password is correct, select static in the IP settings in the advanced options below, do not select DHCP, and then there will be a lot of gateways and the like below, you just follow the instructions displayed there, click on the link after typing, and remember that no one is missing. Hope,I'm small 3 personal test,There is also a reflash rom,Factory reset is also OK.。 Don't know how to come to me.

It could also be because of the router, reboot it, and press the hole in the back.

Hello dear, I'm Xiao Hei, a little brother who specializes in serving life problems, please wait a while, and answer for you as soon as you get the result. 

1. It may be just a short-term network is not good, and it is related to the card, the general mobile card network is better, and the Unicom card often has no network. You can try a different card. 2. The phone may have a temporary system error, try to restart it, check whether the card is plugged in properly, and whether it will be in bad contact.

3. Check whether the access point settings of the network are correct, if only a software cannot run, you can see if the network of the software is restricted. 4. If you can't connect to the server no matter how you get it, then you have to contact Xiaomi, feedback the situation, and return it to the factory for repair.

It may also be a broadband arrears.

Unable to connect to server (1,302) means that the network connection has timed out.

Unable to connect to server (1,302) Cause Analysis:

The network is unstable and the connection signal is poor.

Unable to connect to server (1,302) Workaround:

1. Replace the connection network;

2. Reconnect to a place with a good network signal.

If the mobile phone prompts that the network is abnormal, please check the following conditions:

1. If you don't restart your phone after upgrading to 4G**, you won't be able to use the Internet function normally;

2. Confirm whether there is a network, it is recommended that you can use it in a place with a strong signal;

3. Check whether there is still a phone bill in the account, if the balance is insufficient, you need to recharge before you can use it;

4. After 3-5 minutes of power off, restart the phone and try again;

5. Check whether the USIM card is inserted, if it has been inserted but still cannot be used, it is recommended that you go to the business hall to check whether the USIM card is faulty, or replace the card for testing;

6. If the traffic usage reaches the maximum value in the current month, the network will be automatically closed, it is recommended that you pay attention to our SMS reminder or inquire about the **product description.

Network TV prompts server connection failure (**1302) is generally caused by the wrong method of connection and setting, it is recommended to restart the router, follow the following methods to connect, set:

1. Required conditions: TV, networked router, network cable;

2. Connect one end of the network cable to the LAN port of the router and the other end to the network interface of the TV.

The TV network interface is on the back).

3. Turn on the TV, operate the TV with the remote control, and enter "System Settings";

4. Under the interface of system settings, select "Network Settings" on the left, click on the right to appear the detailed interface of network settings, select "Wired Settings" and click to enter.

5. After entering the wired settings, click "Wired automatically obtain IP", the TV can detect the network signal and obtain the IP address, indicating that the TV has been successfully connected to the network.

1. The network server connection failure (**1302) is generally caused by the wrong connection and setting method, and it is recommended to restart the router.

2. Restart the router to try, or restore the router to factory settings, then dial up the Internet again, and reset the wifi according to the setup wizard, or change to a new router and dial up to connect to the Internet.

3. Contact broadband customer service to confirm whether there is any abnormality in the broadband account, such as arrears, recharge the broadband, and then dial up to connect. Or contact the maintenance personnel for door-to-door service!

Network connection error **1302 refers to the failure of the set-top box to connect to the server, which is generally caused by abnormal network connection

Step 1] Check whether the network cable is securely connected.

Step 2] Restart the modem.

Step 3] After the modem is stabilized, restart the set-top box.

Step 4] If this error is still reported after restarting, you need to report a fault.

Error **1302 generally has 2 cases:

First, you need to check whether the network can be pinged, if the ping is not working, you must deal with the network problem first. Generally, find a regional network manager.

Second, if the network can be pinged, it means that the server address has been restored to factory settings for some reason, and you need to call ** to go to the IPTV fault center to let them refresh your server address. It's solved.

But whether it is the first or the second type, maintenance personnel are needed to deal with it, in fact, the maintenance personnel are powerless, they just want to come over to fight, these 2 can only be played by maintenance personnel.

1) If it is a problem with the broadband itself, first directly connect the broadband network cable to test, if it is a broadband problem, contact the broadband customer service to solve it.

2) If it's a problem with the router, if it can be used originally, it can't be used for the time being, my own practice is to disconnect the power of the router and plug it in, and I'll take a look. In there is a factory reset, from the new strict according to the manual settings can be used, I don't understand, it is not recommended to set it at will (this is under the premise of the correct physical connection, sometimes the router is slow or failed to find the IP address, not that the router is broken).

If it can't be solved all the time, it is recommended to call the customer service of the router, they have **** guidance, I encounter a problem that I can't solve by myself, it is very useful to consult the advice they gave, and they will give the correct advice for your settings or operations.

3) If you turn off the wireless switch, turn it on, if it is a wireless connection with software, it is normal for the software to be difficult to use and often have problems, there is no better way, use a router. In addition, it is caused by the network card driver is not or is not suitable, and whether there is a problem with the network cable interface or network cable.

4) If it is caused by a system problem, it is recommended to restore the system or reinstall it.

5) If you have any questions, please ask me.

Unable to connect to server (1,302) means that the network connection has timed out.

Unable to connect to server (1,302) Cause Analysis:

The network is unstable and the connection signal is poor.

Unable to connect to server (1,302) Workaround:

1. Replace the connection network;

2. Reconnect to a place with a good network signal.