What should I do if there are too many auto startup items on the computer and too many startup items

There is a startup item with multiple startups, or there are system items to start or service items to start, you can take a look, according to 360 and other prompts, turn off the ones that should be closed, basically it's OK, and then the slow startup of the computer is not all the problem of startup items, and it is also possible that the system files are large and many, and most of them are left behind when you install or delete the program, and it will slow down when it is actually long!

Estimate system issues.

Maybe it's because you can't install more than two antivirus software at the same time because of the number of files, and it's definitely slow to install, all because of the disgusting Chinese software vendors.

Reload one and optimize it with 360.

Boot into the startup items, disable the redundant startup items, and leave only the items that must be started at boot.

Use 360 to put some prohibitions that don't need to be started.

System issues. Add me and I'll teach you.

1. Press "win r" to call out the run, enter "msconfig" in the Hongzai only run, and click OK.

2. Under the "General" tab, click "Selective Startup", check "Load System Services" and "Load Startup Items".

3. Switch to the "Boot" tab, change the timeout time to 3 seconds, and then click "Advanced Options".

4. In the boot advanced options, check "Number of processors", set it to "2", and then click OK.

Summary. Hello, dear, there are many ways to deal with the startup items of the computer:

1. Find the menu bar in your computer, enter the relevant main page, and find the control panel option.

2. Enter the msconfig command in the input interface of the start menu bar of the computer, and then press enter to enter the relevant command interface.

3. After opening the interface of the command, you can see the function interface of the system configuration, find the startup function button on the current page, click to enter the relevant page, and then you can boot the computer to start up.

The computer boots up too much.

Dear, hello, there are many ways to deal with the startup items on the computer: 1. Find the menu bar in the computer, enter the relevant main page, and find the control panel options. 2. Enter the msconfig command in the input interface of the start menu bar of the computer, and then press enter to enter the relevant command interface.

3. After opening the interface of the command, you can see the function interface of the system configuration, find the startup function button on the current page, click to enter the relevant page, and then you can boot the computer to start up. 4. For users who are not good at computer operation, you can use relevant computer management software to help better manage the computer, click to enter the management project page of Tencent Computer Manager. 5. Find the computer acceleration page through Tencent PC Manager, you can find the relevant function buttons on the current page, and click on Tsaisen to enter the startup page.

Why are there so many of these in one opportunity.

Dear, the programs that run on this system will not affect the computer.

Because of the excitement for the background running Nawang program, generally refers to the operating system does not show the running process. If the way to close the background program is very simple, just press Ctrl+Alt+Delete, call up the task manager and change to the process option, you can see the process of the background operation of the program, you want to close the background program just right-click the option to end the process End process tree.

Hahaha. Okay thank you.

The first step is to press the Win + R shortcut keys at the bottom left corner of the keyboard at the same time to open the running window and open the system configuration window. Or we click on the start menu and find "Run", and the run window will pop up;

In the second step, in the "Run" window, enter the "msconfig" command on the keyboard, press Enter, and we can see the system configuration window;

The third step, in the "System Configuration" window, we see the "General" option, here switch to the "Startup" item, in this column we can see all the system startup items;

Fourth, in the checkbox on the left, look at the software and programs that we must start at boot, and check the unchecked ones that are not needed, so that you can turn on or off the relevant boot items;

Fifth, in addition to the above method of opening the system configuration window, we have other ways to open it. In the search area of the start menu, directly type "msconfig", press enter, and you can quickly open the system configuration window;

The sixth step, the next operation is the same as the third step above, so we can turn on or off the relevant boot items, so as to improve the speed of the system;

Finally, after turning off a lot of unnecessary startup items, the computer will boot up and run much faster.

Install 360 Security Guard, select Optimize Acceleration, and click the startup item at the bottom left.

Just ban the items that need to be banned.

To share popular science with all old fans, computer knowledge, necessary for installation, all kinds of computer problem solving, the following is to talk about, the computer boots slowly, too many startup items will definitely affect the boot speed, the great god is easy to solve with a few steps, and friends who feel interested can take a look.

Too many startup items, will cause the computer to start slowly, the computer runs slowly, too many startup items usually take several minutes to start, usually many friends in the installation of software when a little careless will default to boot auto-start, so as to increase unnecessary startup items, there are many software default startup items, boot auto-start, will cause too many startup items slow boot speed and so on.

Solution: I usually use Kingsoft Guardian to use Kingsoft Guardian's boot acceleration function, you can immediately turn off unnecessary startup items, or you can use startup management alone, turn off unnecessary startup items by yourself to increase boot speed, and then remember to clean up garbage and clean up unnecessary plug-ins, so that the computer is cleaner and runs faster.

Install 360 Security Guard, manage startup items, and each of them has a recommended turn on and off.

If you don't want to install the software, just start - run - type "msconfig" - start, and remove all the checkmarks except ctfmon and antivirus.

Autoruns, a very powerful startup item management, but it is recommended for people with some computer knowledge.

The boot management of the 360 is also good.

There's a boot optimizer that automatically helps you manage auto-startup items.

2.Start - Run - Enter msconfig to manage startup items.

Install a 360 to automatically turn off what you don't want to use.

Click "Start" - "Run", type msconfig There is a startup project in it, and you can remove it if you don't need it.

Launches which can be turned off.

1. It is recommended that you **Kingsoft cleanup expert, there is an icon of program software in his startup item, you can easily close the program that does not need to be booted (you can also open it at any time), which is convenient and safe to try.

2. Too many startup items can also cause slow boot, click"Get started"Run Enter after entering msconfig and click Enter"Launch"Only keep"ctfmon Antivirus Firewall,"The other front hooks have been removed. Then click"Applications"Press"OK"(It would be better if you found the name and path of an option to be turned off separately).

3. Restart the computer, a dialog box will appear when you boot it to the desktop, add a checkmark to the dialog box, and you can confirm it.

4. How to remove the self-starting item from the digging shed.

Start plex and run input regedit enter to open the registry, in turn.

hkey local machine software microsoft windows currentversion run] on the right side, see if there is an option you are looking for, and the path of the option you are looking for is the same, if there is a deletion (backup, if you need to start and restore the backup in the future), restart the computer. Reference.

You can leave it blank to enter the registry, delete other startup items, and just keep it if you don't have antivirus installed. Removal method: start-run-regedit[hkey current user\loss-of-error\microsoft-windows-currentversion\run] is kept.

Delete all of [hkey local machine software, Microsoft Windows currentversion run], etc

If there are too many. It is bound to affect the speed of the computer in particular.

When those programs that take up too much resources (such as viruses, and Thunderbolt startup when the computer starts) are likely to cause the computer to be stuck for a long time, the solution is.

Use "Start" and "Run" to enter "msconfig" and select "Start".

See which programs you are not familiar with (or haven't installed yet) and uncheck them to do so.

will cause fewer launches.

Makes the trouser trace system faster.

There is a very large data exchange file in the hard punching plate, which is reserved by the system for virtual memory for temporary storage, and many applications are often used, so the system needs to often make a large amount of data access to the main memory, so the speed of accessing this file constitutes a very important factor affecting the speed of the computer! Generally, Windows defaults to the system to manage the virtual memory, and it will automatically adjust the size of the swap file according to the needs of different programs, but such a large and small size will put an additional burden on the system and make the system run slower! For this reason, it is best to customize the minimum and maximum values of virtual memory to avoid frequent resizes.

To set the virtual memory, press the right button on "My Computer" and select "Properties", and set the "Virtual Memory" in the "Performance" dialog box in the "Advanced" option.

You can enter msconfig in the runtime, and there is a selection in the startup item to check off all the redundant. If you answer which mud has 360 degrees, then it is also clear and slow seepage, and it is easy to see the name of the software.

Type msconfig in the run command, find the startup options, and remove all the unwanted ones. Hope it solves your problem.

Start --- run ---msconfig--- start --- just remove the checkmark before starting the project that you don't want.

Install 360 Security Weishi

There is a high state level in the bureau.

Start the book at the point of the lap item status. Then turn it off.