How to do the initial registration of a Fire Engineer I

The initial registration process of registered fire engineer is divided into 5 steps: application - acceptance - approval - reporting - issuance of certificate.

1. Application. Personnel applying for registration of a first-class fire engineer certificate shall submit registration application materials to the fire department of the provincial or prefecture (municipal) level public security organ where the unit is located through the employing unit.

2. Acceptance. After receiving the applicant's application materials for the registration of the first-class fire engineer certificate, the fire department of the provincial public security organ shall inform the applicant on the spot or within 5 days of all the contents that need to be supplemented and corrected if the application materials are incomplete or do not conform to the statutory form.

3. Approval. If the registration application materials submitted by the applicant are complete, in accordance with the statutory form, and have the conditions for on-the-spot approval, the first-class fire engineer certificate registration and approval department shall make a written registration decision on the spot. In addition to the registration license decision can be made on the spot, the provincial public security organ fire department from the date of acceptance of the registration application within 20 days, in accordance with the provisions of the conditions and procedures to complete the preliminary review of the registration application materials.

4. Report. The fire department of the provincial public security organ shall submit the application materials and preliminary review opinions for the registration of the first-class registered fire engineer certificate to the Fire Bureau of the Ministry of Public Security for approval. The fire department of the Ministry of Public Security shall, within 20 days from the date of receipt of the application materials and preliminary review opinions submitted by the fire department of the provincial-level public security organ, make a decision on whether to approve or not.

If the approval decision cannot be made within the prescribed time limit, it may be extended for 10 days with the approval of the person in charge of the registration examination and approval department, and the applicant shall be informed of the extension period and reasons.

5. Issuance of certificates. The Fire Bureau of the Ministry of Public Security shall, within 10 days from the date of making the approval decision, issue and deliver the registration certificate and practice seal of the first-class fire protection engineer, and make an announcement in the technical service management system of the registered fire protection engineer.

The registration of a registered fire engineer is a social fire technical service information system, and the fire technical service organization and registered fire engineer must register an account and then register the operation, let's take a look at the initial registration process? How does it work?

Specific steps: Individual certificate: valid with the person.

1. Enter the home page of the system, click "Registration Application for Registered Fire Engineer", enter the application interface of registered fire engineer, and select "Initial Registration";

<>2. Log in to register, click "Registered Fire Engineer Registration";

<>3. Verify the qualification certificate, truthfully fill in the name, ID number, qualification certificate number, and qualification certificate management number, and verify the basic data of the registered fire engineer;

4. Select the province where you live, fill in the mobile phone number first, drag the slider to unlock the SMS sending, click Send SMS, fill in the verification code and password and submit; Upload the corresponding **, and then click Submit;

5. For real-name authentication, you can choose one of the three ways for authentication;

6. At the end of the certification, jump to the home page of the registered fire engineer and complete the registration.

After the above six steps, the certificate will be registered, and then you are the rightful first-class registered fire engineer of the People's Republic of China!

The initial registration process of a first-class fire engineer is divided into 5 steps: application, acceptance, approval, reporting, and issuance.

1. The initial registration of the first elimination takes about 4-5 months, because there are many units that need to be audited for the first elimination certificate, the process is complex and time-consuming. Each registration validity period shall participate in the completion of at least 3 fire technical service projects; Registered fire engineers employed by key fire safety units shall sign at least one fire safety technical document within one year.

2. To apply for the fire engineer series, the most appropriate major is fire engineering technology. Its core courses include building electrical control technology, fire combustion, building fire protection design principles, ventilation and smoke prevention and exhaust technology, building fire water supply engineering, fire monitoring system design and construction, design and construction technology of common fire extinguishing systems, fire protection technology and equipment, etc.

3. The "Fire Engineer" professional post ability certification training program is a training program jointly established by the Institute of Labor Science of the Ministry of Human Resources and Social Security, the Fire Bureau of the Ministry of Public Security and the Ministry of Education, aiming to strengthen and popularize the knowledge of fire science and technology to the public and specific groups of people, and carry out fire prevention knowledge education, so as to improve the fire safety quality of the public, reduce the occurrence of fire accidents, and reduce the loss of life and property.

One. Persons applying for the registration of registered fire engineer qualifications shall meet the following conditions at the same time:

A) in accordance with the law to obtain a or second class registered fire engineer qualification certificate;

2) Employed by an approved fire technical service organization or key fire safety unit;

3) There are no circumstances of refusal to register.

Two. The following materials shall be submitted to apply for the initial registration of fire protection engineers:

a) Initial registration application form;

2) A copy of the qualification certificate of a registered fire engineer of the first or second class;

3) A copy of the identity certificate;

4) A copy of the copy of the qualification certificate of the employing unit (the employing unit does not need to provide it if it also applies for the qualification of a fire technical service organization);

5) A copy of the employment labor contract signed with the employing unit, a copy of the social insurance certificate or a copy of the retirement certificate;

6) Continuing education qualification certification materials (no need to provide if you apply for initial registration within 1 year of obtaining the qualification certificate).

Bring some documents and submit registration application materials to the provincial or prefecture (municipal) level public security organ fire department where the unit is located through the employing unit.

Initial Registration Application Form;

Copies of the applicant's identification materials, registered fire engineer qualification certificate, etc.;

A copy of the copy of the qualification certificate of the fire technical service institution of the employing unit or the certification materials of the key fire safety unit;

A copy of the labor contract or employment document signed with the employing unit, and a copy of the social insurance certificate or personnel certificate.

If the application for initial registration is overdue, the supporting materials for meeting the requirements for continuing education shall be submitted.

Fire Engineer declares for the first time in the system as a registered fire engineer

Step 1: Enter the homepage of the business information management system of registered fire protection engineers of fire technical service institutions, click on 'Registered Fire Engineer Registration Application', enter the registered fire engineer application interface, and select 'Initial Registration'

Step 2: Check the 'Integrity Pledge' and fill in the identity verification information.

Step 3: Fill in the declaration form, upload scanned copies or documents of other materials, and click 'Submit' to complete the registration application.

Step 4: After submission, log in to the system using the registered contact** to view the progress of the registration application.

The fifth step, after submission, the pre-examiner will pass the pre-trial online pre-trial, and the process will be submitted to the window for acceptance

The sixth step is to accept and agree to accept the acceptance at the acceptor window, generate the initial registration application acceptance certificate, accept it, and submit the process to the review

If you do not agree to accept it, you will generate a voucher for the inadmissibility of the initial registration application, cancel the application, and the engineer can re-apply).

In the seventh step, the examiner reviews the legality of the materials and submits them to the next step for approval.

If the last approver fails to approve the approval, it will be rolled back to the review, and the reviewer will re-review

If the last approver fails to approve the approval, it will be rolled back to the review, and the reviewer will re-review

The eighth step is to print and issue the certificate.

Introduction to the Basics of Registered Fire Engineer I: How to Become a Registered Fire Engineer?

I also searched for a long time to find it, so take it.

Notes for Initial Registration of Registered Fire Engineer I:

1. The personnel applying for the registration of registered fire engineer qualifications shall meet the following conditions at the same time:

A) in accordance with the law to obtain a or second class registered fire engineer qualification certificate;

2) Employed by an approved fire technical service organization or key fire safety unit;

3) There are no circumstances of refusal to register.

2. The following materials shall be submitted to apply for the initial registration of fire protection engineers:

a) Initial registration application form;

2) A copy of the qualification certificate of a registered fire engineer of the first or second class;

3) A copy of the identity certificate;

4) A copy of the copy of the qualification certificate of the employing unit (the employing unit does not need to provide it if it also applies for the qualification of a fire technical service organization);

5) A copy of the employment labor contract signed with the employing unit, a copy of the social insurance certificate or a copy of the retirement certificate;

6) Continuing education qualification certification materials (no need to provide if you apply for initial registration within 1 year of obtaining the qualification certificate).

To apply for registration, the first-class registered fire engineer needs to submit the information of the employing unit, work experience, personal basic information, etc. in the fire technical service agency and the registered fire engineer business information management system for application, and the registration can be completed only after the approval is passed.

The initial registration measures for first-class registered fire engineers are as follows:

The registered fire engineer "initial sail blind book" is applied for in the fire technical service organization and the registered fire engineer bending business information management system, and the specific system application operation steps are as follows:

Step 1: Enter the homepage of the system, click on the 'Application for Registration of Fire Engineer in the Leather Car Register', enter the application interface of the registered fire engineer, and select 'Initial Registration';

Step 2: Check the 'Integrity Pledge' and fill in the identity verification information.

Step 3: Fill in the declaration form, upload scanned copies or documents of other materials, and click 'Submit' to complete the registration application.

Step 4: After submission, log in to the system with the registered contact** to check the progress of the registration application approval (the default password is 123456, change the default password as soon as possible after submission);

Step 5: Approval;

Step 6: Print and issue the certificate.

Get free learning materials and knowledge maps for registered fire engineers.

The first-class fire engineer certificate implements the practice registration system, and the certificate itself is valid for a long time, but if the certificate is needed to practice, it needs to be registered within one year of obtaining the certificate, and the registration is valid for 3 years, and the candidates can register in the "social fire service technical information system".

1.Registration**: EnterTechnical Information System for Social Fire ServicesOn the home page, click "Registered Fire Engineer" to enter the registered fire engineer application interface and select "Initial Registration".

2.Login: Enter, password and check code, click the "Login" button; After entering the home page of the registered fire engineer, click on the "Initial Registration" menu;

3.Submission information: Enter ** information, click the "Submit" button, and then select the acceptance window.

4.After submission, you can check the current application status in the "Review Information" column on the homepage of the registered fire engineer, and continue to submit the application after supplementing the information if it is "returned"; After entering the "Processing" page, click the "Withdraw" button to withdraw the application for travel and tracking (after the pre-approval is passed, enter this page to print the application**).

Candidates shall apply for initial registration within one year from the date of obtaining the qualification certificate of registered fire engineer, and if they fail to apply for initial registration within the time limit, they shall participate in continuing education, and can only apply for initial files and registration after meeting the requirements of continuing education. Persons applying for registration shall meet the following conditions at the same time:

1.Obtain the qualification certificate of first-class registered fire engineer in accordance with the law.

2.Employed by an approved fire technical service organization or key fire safety unit.

3.Persons who do not stipulate the circumstances of non-registration.

A Class 1 Fire Engineer is required to register. The state implements a registered practice management system for the qualifications of registered fire engineers. Personnel who have obtained the qualification certificate of first-class and second-class registered fire protection engineers can practice in the name of registered fire protection engineers of the corresponding level after registration.

1. Submit an application: The person applying for the registration of the first-class fire engineer certificate shall submit the registration application materials to the fire department of the provincial or prefecture (municipal) level public security organ where the unit is located through the employing unit.

2. Acceptance: After receiving the registration application materials, the fire department of the public security organ shall issue an acceptance certificate if the application materials are complete and conform to the statutory form; Where it is not accepted, a certificate of inadmissibility shall be issued and the reasons shall be clearly stated. If the application materials are incomplete or do not conform to the statutory form, the applicant shall be informed on the spot or once within five days of all the contents that need to be supplemented and corrected, and if the application materials are not notified within the time limit, it shall be accepted from the date of receipt of the application materials.

After accepting the registration application, the fire department of the public security organ at the prefectural and municipal level shall send the application materials to the fire department of the public security organ at the provincial level within three days.

3. Examination and approval: The fire department of the provincial public security organ shall review the applicant's conditions and registration application materials and make a registration decision within 20 days from the date of acceptance. If a registration decision cannot be made within the prescribed time limit, it may be extended for 10 days with the approval of the person in charge of the fire department of the provincial-level public security organ, and the applicant shall be informed of the reasons for the extension.

4. Issuance of certificates: The fire department of the provincial-level public security organ shall issue the registration certificate and practice seal of the corresponding level within 10 days from the date of making the registration decision, and announce it to the public; Where a decision is made not to register, a written decision to refuse registration shall be issued and the reasons shall be clearly stated.

According to the "Notice on Continuing Education of Registered Fire Engineers" officially issued in 2019, those who have obtained the "Qualification Certificate of Registered Fire Engineers of the People's Republic of China" and are under the age of 70 are required to participate in the continuing education of registered fire engineers.

The continuing education content mainly includes three contents:

1. Fire protection laws, regulations and policies: "Regulations on the Management of Registered Fire Engineers" (Order No. 143 of the Ministry of Public Security), a total of 4 class hours;

2. Fire technical standards and specifications: "Code for Fire Protection of Building Interior Decoration Design" (GB 50222-2017), a total of 12 class hours;

3. Fire safety management: "Regulations on Fire Safety Management of Organs, Organizations, Enterprises and Institutions" (Order No. 61 of the Ministry of Public Security), a total of 4 class hours.

Those who participate in continuing study must complete all the hours of study before they can apply to take the test. If the test score is more than 80 points (including 80 points), and those who fail to pass the test for three consecutive times will be automatically recorded in the system, and they need to retake the study and apply for the test.