How difficult is the first class fire engineer exam

Vary. Features of the three subjects:

2. Comprehensive ability: It is an extension of technical practice, which mainly explains the practical operation experience such as inspection, commissioning, and acceptance, and there will be many small skills in it.

3. Case analysis: It is all about the practical application of real knives and guns, which is more difficult, and can only be learned after learning technical practice and comprehensive ability.

Registered fire engineer registered in the Ministry of Public Security Fire Bureau, the responsibility is heavy, not allowed to appear the phenomenon of confusion, the Ministry of Public Security for the candidate's technical quality, application ability requirements are higher, in order to ensure the quality of fire practice;

The examination involves a wide range of professional knowledge, chemistry, regulations, construction, water supply and drainage, HVAC, electrical, decoration, etc., not only many knowledge points, but also the proposition group focuses on testing the candidate's ability to apply in practice, which not only requires candidates to understand and remember the knowledge points, but also can be flexibly applied to practical problems.

In preparing for the first-class fire engineer exam, you must pay attention to the following issues.

01. Don't blindly brush the questions.

02. I think I have a firm grasp of knowledge.

As mentioned in the previous article, after the knowledge is firmly grasped, you can brush the questions to consolidate the knowledge. So what does it mean to have a solid grasp of knowledge? Many candidates memorize it or listen to it once, and then do a good job in the questions, and think that they have mastered it well.

In fact, for the fire engineer exam, the key basic knowledge needs to be mastered by the degree of proficiency. For example, how to test whether you have a firm grasp of the knowledge point of "fire partitioning"? Take a blank piece of paper, can you write it silently, and whether the various building categories, factories, warehouses and civil buildings can be written silently?

If not, it means that it is not skilled enough and needs to be strengthened. Another example is the facility article, whether the setting place of self-spraying can be proficient in silent writing. Therefore, don't ignore the mastery of key basic knowledge, when you reach the level of mastery, a lot of complex knowledge will be solved!

03. Ignoring the establishment of the framework.

Many test takers often complain that they understand the knowledge, why are they easy to make mistakes when doing the questions? In fact, on the one hand, the knowledge is not firmly grasped, and on the other hand, there is no knowledge framework, so how to establish a knowledge framework? It's still the old way, take out a piece of paper and write, as the saying goes, a good memory is better than a bad pen, this truth has been tried and tested repeatedly.

For example, "safe evacuation", including several contents, there are several parameters, the three parameters of the steady fire "Xiaomi, big money, and close distance" have basically summarized all the content of the safety evacuation, and extend the specific knowledge points from these three parameters, how the specific knowledge points are stipulated, and how these knowledge points are related to each other, this is the framework, in this large framework step by step to fill in the specific knowledge, I believe that according to this template to review, there will be no more cases where the knowledge points will not be used flexibly.

04. Case study and question making method.

Many candidates have heard others say that case analysis has to be done, but they don't know exactly how to do it. It's just to find a few questions to do, but in fact, how to do the questions also has to pay attention to ways and methods. As we all know, case analysis is the focus of learning fire engineers, but also the difficulty, how to do case analysis?

The teacher requires us to do the questions at the specified time, such as the case analysis practical class of Wenwen Fire Fighting, which requires us to answer the questions within the specified time, set a time limit, and simulate the real situation of the exam. Don't do it if you can't finish it, find the reason, why you can't finish it; If you don't do it well, don't turn the book, find out the reason, why it won't, and how to strengthen it. In this way, the test situation is simulated to do the questions, which not only exercises the mastery of knowledge points, but also the ability to respond on the spot and the ability to resist psychological pressure.

Avoid eye-to-eye and low hands. In the last month, we had to take a set of case analysis mock questions (six big questions) every day and spend three hours to do the questions, just like the exam, to find out the weak links and target each breakthrough.

It is generally reflected that the first-class fire engineer examination is difficultDali EducationThe following reasons are analyzed:

It is difficult to improve the pass rate of a fire engineer, which is closely related to the industry itself, registered fire engineers are registered in the Fire Bureau of the Ministry of Public Security, and the Ministry of Public Security has high requirements for candidates' technical quality and application ability to ensure the quality of fire protection work; The examination involves a wide range of professional knowledge, such as chemistry, regulations, construction, water supply and drainage, HVAC, electrical, etc., and pays attention to the practical application ability of candidates, which not only requires candidates to understand and remember the knowledge points, but also can be flexibly applied.

2.The knowledge points are not mastered in place.

3.Nervous and uneasy when doing questions, unable to calmly face the questions that are caught off guard;

4.The allocation of time for answering questions is unreasonable, there is too much time for thinking, and there is less time for writingIt didn't follow the usual order of easy and then difficult.

The first-class registered fire engineer implements the national unified examination. The exam is definitely difficult, but if you are well prepared for the exam and have a thorough grasp of the knowledge points, the pass rate is still very high.

Because we can't get in touch with firefighting-related knowledge in daily life, it is still difficult for us to learn.

There are three subjects in the exam, "Fire Safety Technology Practice", "Fire Safety Technology Comprehensive Ability" and "Fire Safety Case Analysis", which add up to almost 10,000 knowledge points, which need to be understood, memorized, connected and applied, and the difficulty of the exam itself is difficult here.

Fire engineers are very popular, the prospects are very good, and the natural requirements are a little stricter.

But you can go to Tianjin Dali to have a look, there is a teacher to give a lecture, the lecture is very good, many people go to listen.

There are also a lot of valuable materials and exercises, so I have nothing to look at and do.

In this way, what seems like a difficult exam will not be so difficult as long as you prepare well.

The difficulty of the first-level fire engineer examination is relatively large, since the beginning of the examination, the annual pass rate is generally not more than 10%, it is precisely because of the hard-won fire engineer certificate, it is scarce, the market gap is large.

The difficulty of the first-class fire engineer certificate is well known to everyone, it is very difficult to take the test, and the pass rate is very low, which greatly hits the confidence of the candidates. The focus of the preparation for the exam is on building fire prevention and fire protection facilities, and it is only necessary to focus on breaking through these two chapters, and there is no problem in passing the examination of technical practice and comprehensive ability. Case Exam Safety Management Building Fire Protection Fire Protection Facilities, Safety Management and Industrial Fire Prevention are relatively easy to score.

Regarding the specific difficulty coefficient of the first-level fire engineer certificate, there is no clear answer, because everyone's situation is different, in fact, whether it is good or not is completely up to you, the first-level fire engineer group is stupid is a three-year rolling management, that is to say, through the three subject exams in three consecutive years, you can obtain the first-class fire certificate, which brings opportunities to major candidates.

Now that you have made up your mind, you must persevere, make sure that you have enough time every day, and be consistent, and ensure that you have at least 2 to 3 hours of study time every day. Fire preparation is a process of self-cultivation, and the test is not only a proof of one's ability, but also improves the quality of life.

1) The first-level fire engineer can be engaged in the work of business manager, project manager, fire protection engineer, budget officer, fire engineering project manager, hydropower engineer, fire protection constructor, construction worker, fire project manager, fire engineering budget officer, mechanical and electrical engineer, data clerk, etc.

2) A fire engineer can also be a fire lecturer after obtaining the certificate, and the registered fire engineer shall be registered in the fire technical service organization or the key unit of fire safety to carry out fire safety technical activities consistent with the business scope of the institution or unit and his qualification level.

3) Engaged in fire safety technical work such as fire protection facility inspection and maintenance, fire safety monitoring and inspection, fire technical consultation and fire safety assessment, fire accident technical analysis, etc.; It is mainly engaged in fire safety management in key fire safety units.

The Fire Engineer I exam is relatively difficult.

The first-class fire engineer examination is a professional qualification examination, and its examination is relatively difficult. The exam involves a lot of knowledge points and a large amount of memory, which requires the mastery of thousands of knowledge points, which has high requirements for candidates' memory and comprehension ability. At the same time, the three subjects of Fire Engineer I are closely related to each other, and candidates are required to have stronger comprehensive application ability than Song Ruler.

In addition, many knowledge points in the textbooks of first-level fire engineers are relatively abstract, which are very difficult to understand and not easy to memorize, and have high requirements for the professional foundation and learning ability of the candidates.

Knowledge points of the first-class fire engineer exam

1. The fire resistance level of the building.

1. The fire resistance level of the building is divided into four grades, one or two categories, three or four categories.

2. The exposed parts of the node gaps or metal load-bearing component nodes should be made as a fire protection layer, 3. The fire resistance grade, number of layers, length and area of civil buildings, and the length of the maximum fire protection partition of one or two stool empty levels is 250 meters. The maximum allowable floor area is 2,500 square meters.

4. For underground rooms, windowless rooms or above-ground rooms with fixed window sashes, as well as evacuation walkways exceeding 20m and no natural smoke exhaust or evacuation walkways with direct natural ventilation but exceeding 40m in length, mechanical smoke exhaust facilities should be provided.

5. 1) If the building height exceeds 32 meters, mechanical smoke exhaust facilities shall be provided.

2) Inner corridor more than 20 meters. It is also equipped with natural lighting and natural ventilation facilities. Mechanical smoke extraction facilities should be provided.

3) If the area is more than 100 square meters, there should be mechanical smoke exhaust facilities. 4) The ventilation and air-conditioning system should be equipped with smoke exhaust system, and mechanical smoke extraction facilities should be provided.

2. The fire partition, fire spacing and evacuation exit of the building.

6. If there are open parts such as corridors and escalators connected by upper and lower floors in the building, the upper and lower connecting floors should be used as a fireproof partition, 7. The fireproof partition in the underground and semi-underground buildings should be separated by firewalls, and the construction area of each fireproof partition should not be greater than 500m2.

8. When the automatic fire extinguishing system is installed, the maximum allowable construction area of each fire partition can be increased to 1000m2. When setting up locally, the increased area should be calculated as one time of the local area.

9. Fire spacing of civil buildings: fire spacing between civil buildings, 6-9 meters.

10. The number of safety exits for public buildings and corridor-type residential buildings shall not be less than two.

The difficulty of the first-level fire engineer examination is relatively large, compared with the second-level constructor, the first-level constructor, and the second-level fire engineer is much more difficult, and the passing standard for the first-level fire engineer to read the bench test score is 60% of the volume, that is, 72 points.

There is no doubt that the first-level fire engineer exam is difficult, and the pass rate of three subjects: the pass rate of "Fire Safety Technical Practice" is: ; The pass rate of "Comprehensive Ability of Fire Safety Technology" is:

Fire Safety Case Analysis" has a pass rate of: The fire test does not involve advanced mathematics and physics, and the content of the test is mostly standardized (mainly memorized), and there is a lot of content that needs to be memorized.

From the point of view of the pass rate, the difficulty of the exam is still very large, of course, the complex composition of the people who take the exam is also a reason, there are office workers, employees of enterprises and institutions, individual travel search households, candidates are almost all zero-based, and the number of abandoners is huge, which is also a reason. It is precisely because it can attract people from all walks of life in society to refer to it, and its gold content can be said to be obvious to all.

If you are a novice, it is best to find a good teacher to teach you. Make sure you have enough time every day, be consistent, and make sure that you have at least 2 to 3 hours of study time every day.

The first-class fire engineer certificate belongs to the access certificate, in accordance with the relevant requirements, the individual can get the certificate in order to enter the work of the relevant industry. You can see how useful it is.

A registered fire engineer can be hired as an engineer, and at the same time, it is one of the main bases for the evaluation of senior fire protection engineers; The second class can be hired as an assistant engineer, partially replacing the functions of a registered safety engineer. It will be better to become a senior engineer with corresponding benefits.

In the latest documents, it can be seen that those who hold a Class 1 registered fire engineer have a good chance of entering the management of fire protection enterprises. The benefit of a promotion is a raise! As long as you are a full-time employee who has taken the next certificate, your salary will basically be **.

How difficult it is to take the first-class fire engineer exam is introduced as follows:

The annual pass rate of a fire engineer is not more than 3%, you can imagine the difficulty, the following is the pass rate of the exam over the years, in 2015, a total of about 320,000 people took the exam nationwide, but the number of people who passed the exam was only 3166, and the overall pass rate was only.

In 2016, the number of applicants nationwide was 508407, and 415733 completed the payment) The actual reference number was about 34-360,000, and the number of qualified people was 9,400, with an overall pass rate.

In 2017, the number of references for the first-class registered fire engineer examination was about 10,000, and the number of qualified people was about 15,000, and the overall pass rate was about 15,000.

The first-class fire engineer exam is a highly valuable exam, the test papers are flexible, and the amount of case analysis questions will be relatively large and difficult.

Prerequisites. <>

All citizens of the People's Republic of China, abide by national laws and regulations, abide by professional ethics, and meet one of the following conditions, can apply to participate in the first-class registered fire engineer qualification examination.

1. Obtained a college degree in fire protection engineering, and worked for 6 years, including 4 years in fire safety technology; Or obtain a college degree in fire protection engineering or related majors, and work for 7 years, including 5 years in fire safety technology.

2. Obtain a bachelor's degree or degree in fire protection engineering, and work for 4 years, including 3 years in fire safety technology; Or obtain a bachelor's degree in fire protection engineering or related majors, and work for 5 years, including 4 years in fire safety technology.

3. Obtain a double bachelor's degree or graduate degree including fire protection engineering, and work for 3 years, including 2 years in fire safety technology; Or obtain a double bachelor's degree or graduate degree in fire protection engineering related majors, and work for 4 years, including 3 years in fire safety technology.

4. Obtain a master's degree or degree in fire protection engineering, and work for 2 years, including 1 year in fire safety technology; Or obtain a master's degree or degree in fire protection engineering or related majors, and have worked for 3 years, including 2 years in fire safety technology.

5. Obtain a doctorate degree or degree in fire protection engineering, and have been engaged in fire safety technology for 1 year; Or obtain a doctoral degree or degree in fire protection engineering or related majors, and have been engaged in fire safety technology for at least 2 years.

6. For those who have obtained the corresponding academic qualifications or degrees in other majors, their working years and the working years in fire safety technology will be increased by one year.