Which exam is more difficult, Constructor I or Fire Engineer?

It will be easy, it will not be easy! All of them are professional exams, but in general, design majors only needed first-class constructors.

pwd=2d72

pdf, a construction [electronic version of the textbook] vip year a construction railway-construction engineering society-the past five years of real question analysis class-Wang Shuonan, a construction document summary, electronic textbooks, past questions, -a construction [municipal practice] "22 edition of the textbook change 5%".pdf, 2021 "Civil Aviation Airport" real questions and answer analysis. pdf Year of Yijian Mining - Xuetian Net School - Intensive Intensive Lecture Class - Huang Haigang, Yijian [Engineering Economy] "22nd Edition Textbook Change 5%".

pdf and other related resources!

Fire Engineer I and Constructor I belong to two types of exams.

The first-class fire engineer has a majority of memory, few calculations, and more specifications involved, which tests everyone's memory.

There are many majors in the first-level construction engineer, such as municipal, construction, mechanical and electrical, water conservancy, aviation, etc., and you have to choose a direction before preparing for the exam. Fire engineers don't have to choose.

In general, the difficulty of the first-level constructor is lower, because the first-level constructor has a total of four subjects, of which three are simple in terms of regulations, management, and engineering economics, and there are only practical difficulties.

To sum up, it can be seen that the difficulty of fire protection engineer is slightly greater than that of first-class constructor. However, fire engineers do not limit their majors, and first-class constructors limit their majors, and many people can't pass the exam.

Calculated from the subject and time of the exam:

There are four subjects in the first-class construction engineer examination, and they have been taken within two years.

The first-class firefighter is a three-subject and has been taken within three years.

At present, the development of this exam for firefighters is not very stable, and the learning materials that can be referred to are also limited. Although there are many subjects, Yijian is already very stable, and the reference learning materials and teacher training are all mature systems.

In terms of difficulty, looking at the pass rate in recent years, the difficulty coefficient of fire fighting is higher, and the pass rate is only, so fire fighting is more difficult.

One construction and one elimination are both first-class vocational qualification examination certificates, and the gold content of the certificates is relatively good.

Application conditions: A college degree or above is required, and there is no restriction on majors.

1. The major can only be applied for by engineering or engineering economics majors.

Examination subjects: three exams in one match, and the certificate can be obtained after passing in three years. There are four subjects in one exam, and it takes two years to pass the exam. It can be seen that it is relatively easy to pass one test through the test subjects, and relatively speaking, there is a greater chance of passing three courses in three years than passing four courses in two years.

It depends on what your major is and what is suitable for the exam.

In fact, the difficulty is about the same, but when you sign up, you can see what major you have and whether you are qualified to register.

In terms of the overall exam pass rate, a first-class fire engineer.

The annual pass rate of the first-class fire engineer is about 3%, and the overall annual pass rate of the first-level constructor is between 5% and 7%.

But the first-class constructor exam.

It is divided into ten majors, and the difficulty of the exam is not the same between different majors, and the following love is the exam pass rate between the majors. From easy to to.

The difficulties are:1Construction has a maximum pass rate of about 7%.

2.The electromechanical pass rate is about 4-5%.

3.The road pass rate is about 4%.

4.Municipal pass rate is about 3-4%.

5.The rail pass rate is about 3%.

6.The pass rate of water conservancy and hydropower is about 3 percent

7.The pass rate is about 2-3%.

8.The pass rate for mining engineering is about 2-3%.

9.The pass rate of port and waterway projects is about 2-3%.

10.The pass rate of civil aviation airport engineering is about 2%.

Fire engineers are not easy.

Let's find out how difficult the fire engineer exam is.

1, the first class registered fire engineer qualification examination in December 19-20, 2015, so far only 4 exams, it can be said that this is a very young certificate, then we can first understand the registered fire engineer examination pass rate in recent years, intuitive experience of the difficulty of the exam:

In 2015, there were 320,000+ exams, 3,166 passed, and the pass rate was passed.

In 2016, the number of applicants was 410,000+, and 6,518 passed, with a pass rate.

In 2017, the number of exams was 460,000+, and 14,402 passed, with a pass rate.

2. After reading this data, have you been frightened by the ultra-low pass rate? The pass rate is indeed a bit miserable, but it should be understood that for a new qualification certificate, most candidates do not know much about the knowledge points review, learning methods, examination skills, etc., and have not really formed a very mature preparation environment, which is also a reason for the low pass rate of the registered fire engineer examination.

3. In addition, whether you are good or not is relative, if you are willing to spend most of your time playing mobile phones and games to study, and find the right learning method that suits you, I believe that even if you have not been exposed to the knowledge of the fire industry before, you have a great chance of passing the exam and successfully obtaining the certificate.

4. There are three subjects in the fire engineer exam, which are fire safety technical practice, case analysis, and comprehensive ability, adding up to almost 10,000 knowledge points. The test center is complex, and it is a liberal arts certificate exam, which requires you to spend a lot of time understanding and memorizing knowledge points. In this case, if it is rote memorization, I am afraid that the learning effect will not be very good, and the efficiency will be very low.

Therefore, it is a good way to summarize the knowledge points in the way you like.

5. The results of the fire examination are valid for three years, that is to say, candidates can also consider taking one subject every year, and three subjects within three years can successfully obtain the certificate, which has the advantage of reducing the pressure of studying and preparing for the exam, and concentrating on 1-2 courses every year, and the pressure can be less.

But no matter what, it's still the same sentence, you must not be lazy when preparing for the exam, and then find a study method that suits you, and if the method is right, the learning effect will not be bad.

At present, I have no statistical support, and the difficulty is uncertain, but the difficulty of any exam will not be low.

It should be that the first-class registered fire engineer qualification certificate exam is more difficult.

The Constructor I exam is a bit more difficult.

The first-class construction engineer is relatively difficult, and the application requirements for the first-class registered fire engineer are relatively less than those of the first construction.

First of all, from the application conditions, both examinations require academic qualifications, but a registered fire engineer requires a college degree or above, but there is no restriction on majors, and a construction can only be applied for by engineering or engineering economics majors.

In terms of examination subjects, there are three exams in one elimination, and the certificate can be obtained after passing in three years. There are four subjects in one exam, and it takes two years to pass the exam. Therefore, relatively speaking, it is easier to be stupid in one phase, and it is still more likely to pass three doors in three years than four doors in two years.

Both are first-level vocational qualification examination certificates, the gold content is naturally very high, considering the major and time, there are relatively more candidates who apply for a match, of course, there are many people who are vocational needs, so it's good to decide for yourself.

If you look at the difficulty of the exam alone, it must be better to take the first-level constructor, but now the gold content of the fire engineer is very high, and the demand is also very large, which is more marketable than the first-level constructor.

In terms of reference materials, the current development of the fire engineer exam is not very stable, and the exam has only been held for two years, and the learning materials that can be referred to are also limited. Although there are many subjects, Yijian is already very stable, and the reference learning materials and teacher training are all mature systems.

In terms of examination subjects and time, there are four subjects in the first-level construction engineer examination, and it is counted as a pass within two years. The first-class firefighter is a three-subject exam, and it is considered to have passed the exam within three years.

The first-class constructor exam and the first-class fire engineer exam are not easy to take.

There are 4 exams in the first-level Jianjutan Engineer Examination, economics, management, regulations and practical cases, and the passing marks are respectively, and the results are valid for 2 years.

There are 3 exams for the first-level fire engineer exam, technical practice, comprehensive ability, and case analysis, with a total score of 120 points, 72 points to pass, and the results are valid for 3 years.

From the effective rollover of the results, we can see that the first-level fire engineer is effective for 3 years, the first-class constructor is effective for 2 years, and the first-level fire protection project is more difficult. In addition, according to the statistics of relevant institutions, the pass rate of the first-class constructor is about 5%, and the highest passing rate of the first-class fire engineering examination is 3%. Therefore, it is more difficult for a first-class fire engineer to be a first-class constructor.

But no matter how difficult it is, as long as we find the right way to study and study hard, we can successfully pass the exam.

The fire engineer is slightly easier and easier to take the exam than the first-class constructor, and the pass rate of the first-class constructor is not high in recent years, which is becoming more and more difficult for outsiders; Fire protection engineers will not be higher than Yijian in terms of the length of study and the difficulty of the examination. After finding a method, it is faster to get started than a design certificate.

First-level constructor: Whether you are in the industry or outside the industry, the pass rate is not high. And from 16 years onwards, the practical professional examination is more biased towards people with real construction experience, which is becoming more and more difficult for outsiders.

And it restricts majors, engineering, and it is easy to take the exam in previous years, and the difficulty has also increased in recent years.

Fire Engineer: Three-year three-subject rolling system, two subjects of guest banquet and one subjective. No matter from the length of the school system to the difficulty of the exam, it will not be higher than that of a building.

After finding a method, it is faster to get started than a design certificate. However, the probability of people who are not in this major can pass the test is not too high, although there are two large pieces of content, but there are many memory data, test your comprehension ability, if there are conditions, it is best to apply for a training institution, there are professional teachers to tutor, the pass rate will increase.

First Class Constructor.

The exam was first held in 2004, and it was very simple at the beginning, as long as you read more books, you will definitely pass. However, in recent years, with the continuous increase in the number of people who pass every year, the difficulty of the construction engineer examination is gradually increasing, especially the practical examination, the questions are more flexible, and the combination of many places and practical work is stronger, and it is not easy to pass, and some years will produce some knowledge points that are not in the books. The annual pass rate of first-class constructors is about 6%.

Fire Engineer.

When the exam was first held in 2015, I thought it would be easy at first, but in fact it was very difficult. According to the statistics of some training institutions, the number of applicants for the first-class registered fire engineer examination in the country is about 580,000 and 500,000 respectively, and the actual reference number is about 30-350,000, and the number of people who have passed the whole course is more than 3,400 and more than 9,400 respectively, and the pass rate is and. However, after the 2017 results were announced, they were generally better than expected, and many people's ** pass rate is expected to reach 8%.

There is no conflict between the registered fire engineer and the first-class constructor, the registered fire engineer and the first-class registered constructor are completely different direction of the qualification certificate, and the two certificates can be used and registered at the same time However, according to the current regulations of the Ministry of Housing and Urban-Rural Development, more than two professional qualification certificates must be registered in the same company, because the social security certificate needs to be submitted at the time of registration, although the qualification certificate of two different directions can be registered at the same time, but the social security certificate limits the use of the unit and scope, Therefore, both certificates can only be registered in the same company.

The first-class constructor and fire engineer are not very easy to test, and there is a certain degree of difficulty. Generally speaking, it is easier for people who are engaged in construction engineering to take the first construction exam, and it is easier for those who are engaged in Kailianwu fire protection work to take the fire engineer exam. If you have been engaged in related work and have a certain foundation and experience, it will be easier to take the exam.

From the application conditions, both examinations require academic qualifications, but a registered fire engineer requires a college degree or above, but there is no restriction on majors. Staring.

In terms of examination subjects, there are three exams in one elimination, and the certificate can be obtained after passing in three years. There are four subjects in one exam, and it takes two years to pass the exam. So relatively speaking, it is relatively easy to eliminate one, after all, there is a greater chance of passing three doors in three years than passing four doors in two years.

In terms of the difficulty of the exam, it must be better to take the first-class constructor, but now the gold content of fire engineers is very high, the demand is also very large, and the market prospect is also very good.

Both of them are first-class vocational qualification examination certificates, and the gold content is naturally very high. Considering the major and time, there are relatively more candidates who apply for the exam, and of course, there are many people who have career needs, so it's good to decide for yourself.

Constructor I and Fire Engineer can apply for the exam at the same time. The examination time for the first-class constructor is generally in September each year, and the examination time for the fire engineer is generally in November each year.

In addition, the certificates of Constructor I and Fire Engineer can be registered at the same time. Fire engineers are managed by the Ministry of Public Security and can be engaged in fire inspection, maintenance, etc. The builder is managed by the Ministry of Housing and Urban-Rural Development and can be engaged in project construction, supervision and other work.

The units they register are not the same, and they are not connected to each other, so there will be no conflict.

However, I would like to remind you that the first-class constructor and fire engineer exams are very difficult, and if you apply for the exam at the same time, it is easy to distract yourself and cause you to fail to review any of them. So I suggest that it is better to come one by one, first to get one certificate, and then to take another.