ASUS P452L laptop with XP system blue screen

When installing Windows XP, the blue screen usually occurs due to a problem with the working mode setting of the hard disk interface.

For high-version operating systems such as Windows 7 and Windows 8, the AHCI mode of SATA hard disk is usually enabled in the BIOS during installation, and the performance of the hard disk in AHCI mode is better than that of the traditional IDE mode. Windows XP was released in 2001, when there were no SATA hard drives, only IDE hard drives, so Windows XP did not support the AHCI mode of SATA hard drives. When the hard disk is in AHCI mode, the Windows XP installer will report a blue screen error because the hard disk is not properly recognized.

There are 2 ways to solve this problem:

Go to the BIOS settings, change the hard disk to IDE mode, Windows XP supports SATA hard disk in IDE mode, it can be installed and used normally. After Windows XP is installed, you can install the AHCI driver in Windows XP and switch to AHCI mode, or you can not change back to AHCI mode and continue to use it in IDE mode.

Use the Ghost image file that integrates the AHCI driver to install Windows XP.

There is a home for the online search system.

You're installing the ghost version of XP, right?,ASUS's notebook has a feature,That is, you can only install its ASUS driver.,Besides,Your notebook can't be installed with XP.,There's no driver support if it's installed.,It's also a toss-up.。 So it is recommended to install win8 bar,When installing the system,Don't let it install the driver automatically,Select cancel,Wait until you enter the desktop,Install the driver manually yourself。

One more sentence,Your book can only be installed win8,

How many modes are there for hard drives? Generally, the current machine should be installed with win7 or.

No one got to the point!! Let me tell you, it's a problem with the HDD interface mode! Win7 and Win8 use SATA ACHI is an advanced mode, and the access speed is fast!

XP mode is IDE mode, just go into BIOS and change the hard disk interface mode to IDE. Finish loading XP. If you want to change to ACHI mode, you can add patch debugging under XP!

It works in person! Hope it helps!

Why do you want to install XP? It should be the blue screen caused by the driver or something that is not supported or conflicted.。。。 Why do you want to install XP? It's better to install win7.

There are many reasons for the failure of the blue screen, there are three common ones, first, system poisoning or system file corruption, second, poor or incompatible memory oxidation contact, third, graphics card BGA packaging chip virtual soldering or other BGA (north-south bridge, etc.) packaging of the motherboard.

There is a high possibility of driver conflict or memory module error, please carefully observe the text information of the error after the blue screen, if there is an unplugged unplug of the expanded memory after insertion, the memory is incompatible or overheated will appear blue screen, after eliminating hardware problems, reinstall the system, and strengthen the heat dissipation in summer.

When a blue screen appears on a computer, it is generally caused by the system, software, memory, etc. Here's why:

1.If the computer is not installed with malware, or malicious programs are generated when surfing the Internet, it is recommended to use Tencent PC Manager antivirus software to clean up garbage, check and kill malware, and restart the computer after completion.

2.Click Start Menu ---Run--- type cmd enter, enter in the command prompt.

for %1 in (%windir%\system32\*.dll) do s %1 and then Enter. Then let him run it and it should be solved.

3.If the memory module in the computer case is dusty, disassemble the case, remove the memory module, use the eraser to erase the gold finger of the memory module, and reinstall it in another slot, and you're good to go.

4.Press F8 to enter Advanced, select the last correct configuration, and OK.

5.Use Tencent PC Manager, Toolbox - Hardware Detection - View the configuration and disadvantages, and update the driver according to the configuration!! Computer Clinic - Search System Blue Screen - See how to fix it.

3. All of this is caused by a typical driver compatibility problem, or an incompatible system installer, or a corrupted installer file.

ASUS P5 supports USB flash drive boot, please follow the steps below:

First, make a boot USB flash drive. Take the Chinese cabbage U disk system as an example. There is also a deep USB flash drive system and so on.

Third, install a recovery system.

Insert the USB flash drive into the computer where you want to install the system, turn it on, keep pressing F12, and then select the USB flash drive drive.

After startup, run the hard disk installer or ghost image installer in the USB flash drive, automatically identify the backup GHO file, select Restore, and you're good to go.

Your motherboard doesn't have an AHCI setting, only SATA and IDE mode, so it shouldn't be the reason why you install Win7 blue screen.

Your description seems to be to install winxp under win7 restart the blue screen,Then you can try to start the disc or other mobile devices,Format the C disk and then install it to see if it can be successful,If it is still a blue screen,First of all, consider the problem of memory,Clean the gold finger and slot of the memory module,If there are multiple memory, you can insert a single strip to try one by one。

What is the blue screen?

There are several pieces of memory, and there may be a memory compatibility problem. Hard disk mode, desktops generally do not need to change, choose the default. Generally, the default is AHCI, and it is changed to IDE only if there are special ones.

Go to the motherboard BIOS settings, find the "SATA mode" setting, there are generally three options in it: SATA AHCI RAID

Generally, only when the win7 system is modified to xp you need to modify the hard disk mode to ide,Because the installation of win7 is the hard disk is basically used ahci,This can improve the efficiency of the machine,And win7 can run in ahci and ide mode,What do you install when you reinstall win7 now?,Ghost version?,Ghost version may appear blue screen,You use the installed version of the system disk to reinstall it.,It should be able to be installed。

On desktops, you can do this by starting from a new partition.

There are many reasons for the blue screen of the computer, and it is recommended that the landlord should check the computer first:

1。If there is a virus in the computer (open Tencent PC Manager - anti-virus - scan and kill) If you kill a Trojan or virus, you should restart it immediatelyRecover", completely remove trojans and viruses!

6。Poor contact and loose contact of the graphics card or memory CPU, or fan with dust cover, (unplug the eraser).

7。The memory CPU is overheated, and the heat dissipation is not good! (Don't turn on for too long, turn off and dissipate).

9。If it still doesn't work, the system files are missing! Or maybe there's a serious error in the system memory!

10。Try to press F8 after booting, press Enter, Enter, enter into safe mode, the last correct configuration, press down to try! Or, enter the safe mode, go to the desktop, open Tencent PC Manager, and kill the virus!

11。Playing games on the blue screen, generally the system does not support this game! (Change the game version or change the XP system).

12。**game,**device,**input method,**tool,browser,driver, etc.,The program is unstable! (Use Tencent PC Manager to uninstall and reinstall or upgrade to the latest version)!

Not sure if it's a laptop or a desktop? Workaround:

1.Go to the BIOS settings before the disc starts, find the SATA setting item, generally in the config item, the SATA mode is disable is the compatible mode, the specific options are different for each BIOS version, but generally two, after entering, select another item that is different from the current item.

Isn't the hard disk mode wrong?