There is only one network cable, how to use wireless network?

Preparation: home network cable, wireless router, network cable, and computer.

How to set up wifi:

1. The router is plugged in, and the network cable that enters the home is plugged into the WAN port of the router;

2. Connect the computer and the router with another network cable (plug one end into any LAN port of the router, and plug the other end into the computer);

3. After opening the computer browser, enter the IP of the router in the address bar (there is one in the manual, press enter;

4. Enter the username and password of the router, generally the initial username and password are admin (can be found in the manual).

5. Click "Setup Wizard" and click "Next";

6. Select PPPoE (ADSL Virtual Dialing) and click Next.

7. Enter the Internet access and Internet password (that is, the network username and password written in the contract of the network and operator), and click "Next";

8. Select "WPA-PSK WPA2-PSK", enter the password and click "Next" (this password is the WiFi password);

9. After the router is set up, click "Finish".

Yes, but you need to cooperate with the computer, plug the network cable into the WAN port of the wireless router, connect another network cable to the computer in the wireless router, and then follow the instructions for wireless routing to make relevant settings, if the network cable is broadband, follow the settings, if it is from someone else's LAN, choose the static IP and then the owner of the pipe cable wants an IP number, of course, you can also choose to let the router choose the Internet access method, I hope it can help you.

You can buy a wireless router It also depends on whether the network cable in your bedroom is dial-up Internet access at home or without dial-up If it is dial-up, you need two network cables If it is a network cable that does not need to be dialed up, the specific operation depends on the instructions in it after you buy a wireless router, which says You can understand it after you read it once.

Buy a wireless broadband router (e.g. tp-link) and borrow a computer. Connect the network cable to the input port of the wireless broadband router, and connect the computer to the output port.

According to the instructions of the wireless broadband router, after setting up the wireless broadband router with a computer, there will be a wireless network in the dormitory.

Hello, buy a wireless router, and after setting it up, you can use your mobile phone to connect to the wireless router to surf the Internet. If you have any questions, please ask.

Buy an unlimited router, then borrow a notebook, set up the router **, and it's OK

All you need to do is buy a wireless router and you're good to go.

If you have a notebook, you can do it, and now you have a notebook that can be set up to transmit wireless wifi

There is only one network cable, a wireless router without a computer, you can use the mobile phone to set up a wireless network, the solution is as follows:

1. Plug the crystal head at one end of the broadband into the WLAN end (broadband access port) of the router, and then connect the router to the power supply.

2. Turn on wifi in the phone settings, click to connect to the wifi of the wireless router you want to set and connect.

3. Open the mobile phone browser, enter the IP address or domain name provided by the wireless router in the address bar (usually displayed at the bottom of the router), and then click "Go".

4. Click "Start Experience".

5. After entering the router settings interface, click the drop-down list on the right of "Internet Access" in the "Internet Settings" option, and then click to select "PPPoE Dial-up Internet Access".

6. Enter broadband in the username under the "Internet Settings" option, and enter the broadband password (usually a mobile phone number) in the password.

7. After that, set the name of the wifi in the wifi name under the "wireless encryption" option (you can also keep the default name), set the wifi password in the wifi password, then click "save", and click "OK" in the pop-up dialog box to complete the wireless router setting.

8. Return to the phone settings, click the wifi name you just set on the router in the wifi settings, and then enter the password and click "connect" to connect to the wifi.

The first thing I need to tell you is that when you only have one network cable, you can set up a wireless router. At this time, it can't be set up with a computer, and strictly speaking, you can't use a desktop computer to set up a router.

When you only have one network cable, you can't use a desktop computer to set up a router at this time, because you can't connect a desktop computer and a router because you can't connect a network cable.

When you only have one network cable, you can use your phone to set up a wireless router.

At this time, to set up a wireless router, you can only use wireless devices to set it up, such as mobile phones, tablets, laptops and other wireless devices, which can be used to set up a router.

The most common thing is to use a mobile phone to set up a wireless router, because now almost everyone has a smartphone, of course, the first choice is to use a mobile phone to set up a wireless router.

Tengda N301V2 wireless router setup method:

1.Wireless router settings: the installation and connection of hardware devices, the WAN port is connected to the broadband incoming line, and the LAN port is connected to the computer in the LAN.

2.Set the IP address of the connected computer. Right-click on "Net Neighbors" > "Properties".

3.Click to select "Automatically get IP address" and "Automatically get DNS server address". When you're done, click on the "OK" button.

4.Log in to your router.

Open the IE browser, enter the default IP address of the router (and press enter (as shown below).

In the pop-up login window, enter the username: admin; Password: admin; Then click OK.

5.If you enter the username and password correctly, the browser will take you to the main page of Administrator Mode.

Wireless Router Settings: Set up a wireless connection.

Wireless basic setup.

On the left, click Wireless settings: Wireless basic settings.

7.Select SSID: Select the SSID to be set to encrypt the primary and secondary SSIDs.

Protected Mode: Enables slower 11B GB wireless clients to connect to 11N wireless networks smoothly in complex and multi-mode mode, with "Automatic" by default.

9.The setup is complete.

Setting up a router is inherently a network cable. Unplug the optical modem,Don't connect the optical modem,Plug in the router lan,Enter the computer and set it according to your own way of surfing the Internet (pay attention to avoid IP conflicts,If necessary, change the router IP)After setting,Plug the router network cable into the WAN port,Plug the light cat at the other end,Isn't it done!?

You can't set up a wireless router without a wireless router. First of all, you need to buy a wireless router, about 50 yuan, and set it up according to the manual. If a desktop computer does not have a wireless network card, you also need a network cable, or install a wireless network card.

Thank you for your question.

Do you first confirm whether your router is wired or wireless?

Wired routers can't send wireless signals.

Today's routers have wireless functions, as long as the wireless switch is turned on in the router, and then set up the wireless account and password. If the router doesn't have wireless function, you can only buy one with wireless function.

1. Plug a wireless wifi into your laptop as a hotspot.

2. It is recommended to buy a wireless router, which is not expensive about 200 gigabit routers now.

Connect the router first, and then connect the laptop to the router with Wi-Fi and you can set it up.

What is 1234? Setting up a wireless router is very simple, connect the network cable to the computer in one section, connect the router LAN port at one end, and then follow the instructions at the bottom of the router to enter the background settings.

Go buy a network cable. You're not a wireless router, and even if you're a wireless router, you need to have a wireless network card on each computer to connect to it.

1.First, make sure that the Internet is enabled.

2.A network cable.

3.You can connect the cat directly to the computer.

4.If you have tools, you can pinch four crystal heads with one network cable.

5.That is, 1236 pinched a crystal head.

6.It's the same on the other side.

Pinch a crystal head.

8.It's the same on the other side.

10.I don't know how long your network cable is?

11.If it's long and has tools.

12.It can be divided into two.

13.Consider adding a network cable.

14.If you have a network of more than 100 megabits.

15.A full gigabit wireless router is recommended.

16.The computer network card should also use a gigabit network card.

17.Category 6 network cables.

18.If the activation is less than 100 megabits.

19.CAT5e network cable is fine.

20.Computer network cards and routers with 100 megabits will work.

If you have 4 laptops, you can consider using one laptop as a wireless hotspot and other wireless computers can access the Internet through this computer.

There are a lot of hotspot software nowadays that you don't have to set up by yourself. If those four are not laptops and do not have wireless network cards, find network cables.

It's as simple as conjuring up a network cable. Materials, a rooster that lays eggs, three crickets that don't bark, and 19 mosquitoes that can't fly, pack them up in aluminum alloy boxes, dig a pit of 99 meters, wrap the aluminum alloy box in a white cloth, head down, set the password to 123, bury it in the pit, go to the buried box every day to read Journey to the West, and wait for 7749 days later, buy a network cable on the street, and you can use it with confidence. Big brother, you only have one network cable, and you have a cat, and the router is wired, if you don't buy a network cable, God can't solve it.

Connect the computer to the router, then log in to the homepage of the router through the computer, set the username and password of the WAN port, and select the on-demand connection.

Enable the DHCP service function of the router (after it is enabled, the computer can automatically obtain the IP address, otherwise the router will not actively assign an IP address).

Wireless Settings - In the basic settings, turn on the wireless function and SSID broadcast function; In the security settings, set the encryption method (select the recommended one) and the wireless password.

Turn on your computer's Wi-Fi to connect your computer to your router via Wi-Fi. Then unplug the network cable and let the router and the cat link. You can surf the Internet normally.

Yes. Connect the network cable to the WAN port on the back of the router, and connect the other end to the broadband.

Once the router is set up, you can use the wireless network.

Precautions for using routers:

1. Avoid using simple wifi passwords and beware of password leakage.

2. Do not place too much debris on the surface and near the router to avoid affecting heat dissipation.

3. Do not use the default login password of the router to avoid being invaded from the router.

4. The router is more suitable to be placed in an open place to have the best effect.

One network can use two wireless routers.

Moreover, one network can use multiple wireless routers at the same time.

In general, multiple wireless routers do not interfere with each other. You can take a look at the WLAN list on your mobile phone or computer, and there will generally be multiple available hotspots to choose from at the same time. However, we can only connect to one hotspot and one wireless network at the same time with the same wireless network card.

If you have more than one wireless card in your computer (which is rare), you can connect to multiple wireless networks at the same time, but it doesn't make much sense, we can connect to the fastest network.

A wireless router has a limited coverage area, especially indoors, where rooms are separated by walls, resulting in wireless coverage that is much smaller than the wireless router's nominal coverage. Therefore, in order to expand the coverage area of a wireless network, it is common to use multiple wireless routers distributed in different places at the same time for users in a large area to access the network.