How can I access the Internet without a network cable on my computer 20

Wireless network card, the last step is to rub the network card, but this method is immoral and illegal, it is recommended not to use it.

Shanghai, Jiangsu Province, Nanjing, Xuzhou, Wuxi, Huai'an, Ningbo, Jiaxing, Huzhou, Jinhua, Guangzhou, Zhangzhou, Sanming, Nanping, Longyan, Quanzhou, Putian, Ningde, Xiamen, Fuzhou, Qinhuangdao, Tangshan, Lianyungang, Taizhou, Nantong, Yangzhou, Dongyang, Lishui, Wenzhou, Taizhou, Shaoxing, Changzhou, Suzhou, Zhenjiang, Suqian, Beijing, Hangzhou, Quzhou.

You can use a wireless network card, which is available in China Unicom, Telecom, China Mobile and other companies.

Wireless Rub Network Card Rub Network Card Mainland Designated Official Website Rub Network Card Cracking Software Is Rubbing Network Card Easy to Use Rubbing Network Card 990wg

How to use the network card Rub the network card radiation Rub the network card** Rub the network card** How much does it cost to rub the network card.

Wake up every morning and pray to God: God, please give me a cable.

You can go to the LAN without a network cable, and you can play CS, Warcraft 3, Dota and so on.

If you're not far from your friends, buy a router.

How can a desktop computer access the Internet without a network cable?

How can I access the Internet without a cable on my laptop? 2

Only desktop computers without network cables If you want to access the Internet, which is the best wireless network card, ask what to buy and each.

Can I access the Internet without a cable? 5

1. The computer is plugged into the network cable but not connected to the Internet, first of all, it may be caused by poor contact of the network cable, you can unplug the two ends of the network cable and reconnect it to try to see if it can be connected to the Internet, or check whether the network cable is damaged, put the network cable on other computers to connect it, if it is plugged in to the network cable, the network cable interface light is not lit, you can check the specific method of how to solve the problem if the computer plugs in the network cable and the light does not turn on.

2. After ruling out the cause of the network cable, it may also be a problem with the computer. If you have connected to wireless wifi before, you need to disconnect the wifi and then connect the network cable, or directly click to open the wifi connection of the computer, and disable all wifi options.

3. Or connect the network cable with other computers to see if you can access the Internet, eliminate the problem of connecting the device, and see if the connection of the router is normal.

4. If it is other devices connected to the router, it is still unable to access the Internet after the router is restarted, or the broadband is not available, or it may be that the mobile phone number that has opened the broadband is in arrears, you can check the phone bill, if there is arrears, restart it after the recharge is successful.

5. If there is no arrears in bandwidth, you can check whether the router or the optical modem connected to the router has a red light. If the router turns on the red light, it means that the network cable is broken or the router is broken, you can change the router, if the optical modem turns on the red light, it means that there is a problem with the connection of the network cable, you can call the broadband customer service to understand, and find a professional to repair it.

6. If there is no problem with the router, there may be a problem with the router settings. Reset the router and then set it again, the router reset is mainly through the reset button at the power interface of the router, press and hold to reset, and then log in to the router again to set the router login password, wifi password, etc., and then use the computer to reconnect and try.

Troubleshooting points for computers with no network cables.

1. Set up the dial-up connection according to the requirements of the operator, connect the stand-alone device to the operator's optical modem, and ping the operator's gateway or DNS server address after dial-up the Internet;

2. If the ping is not working, it means that the operator's external network network is not connected, just call ** to find the operator to report for repair;

3. If the ping means that the external network network is normal, it has nothing to do with the operator's network, and the fault is on the router, restore the router to factory settings, and then reset it to eliminate the fault.

4. If the router still fails after step 3 above, you can judge that the router hardware is faulty and you can only replace the router.

The solution to the problem that the computer is plugged into the network cable and there is no network.

1. First of all, right-click the network connection icon on our computer, go to Ethernet, and click on the network and sharing center.

2. Then, after we go to the Network and Sharing Center interface, click Change Adapter Settings.

3. Then, after we enter the network connection interface, right-click the local connection and select Properties.

4. Then, after we go to the local connection property interface, click "Configure".

5. Then, after we go to the configuration interface, select Advanced, click "Connection Speed and Duplex Mode", and you can see that the default value is auto-detection.

6. We changed the auto-detection to "10 Mbps half-duplex", click OK, and you can see that the network cable has been plugged into the computer and has responded.

First, it can be repaired through the computer manager network repair function.

1.Open PC Manager and click Toolbox.

2.Locate the Network Repair Tool.

3.Click "Fix Now".

2. You can also use commands to reset the network. 1.Find "Run" in the Start menu

2.Then enter cmd in it

3.In the command prompt that appears, type "netsh winsock reset.""Press the "Enter" key.

It takes effect after restarting the computer.

There are many reasons for this problem, such as the router is not connected to the Internet, network cable problems, computer setting problems, etc., so it is necessary to troubleshoot and find the problem in order to solve it in a targeted manner.

1.If all the computers and mobile phones are connected to the router's network and can't access the Internet, then it's obvious that your router can't access the Internet; In this case, you just need to make sure that the router is connected to the Internet.

2.If other computers and mobile phones can access the Internet normally after connecting to the router's network, and only a computer cannot access the Internet after connecting to the network cable from the router, in this case, check the following problems:

1) Restart your computer.

2) Check whether the network cable is firmly connected and whether the network cable is damaged? If you have another network cable, you can change it to another network cable.

3) Check if your computer's IP address is set to "Automatically get IP address" and "Automatically get DNS server address".

4) Check if the DHCP service on your computer is started normally? If the DHCP service is not started, then the computer will not be able to get the IP address from the router, and it will not be able to access the Internet.

5) Update the network card driver on the computer, you can go to the official website of the network card ** the latest driver. Or find a computer that can access the Internet,** Drive Life Network Card Version or Drive Genie Network Card Version,Then use a USB flash drive to copy it to a computer that can't access the Internet and install it。 After the installation is complete, run the software to update the driver of the network card.

6) If the router network is normal, there is no problem with other aspects of the computer, in this case. If you have made a system backup, you can restore it, and if you don't, you can reinstall the system.

1.You can fix it through the PC Manager Network Repair feature.

2.Open PC Manager and click Toolbox.

3.Locate Network Repair Tool 3Click "Fix Now". 2. You can also use commands to reset the network. 1.Find "Run" in the Start menu2Then type cmd3 into it

On a computer that can access the Internet normally, perform the following operations: right-click Neighbor on the Internet - Properties - Double-click Local Connection - Support - Details, view and record the obtained network parameters, and then disconnect the network cable connected to the computer; Then on the computer that cannot access the Internet, perform the following operations: right-click the network neighbor - Properties - right-click local connection - Properties - Internet Protocol - Properties - Use the following IP address to set the network parameters recorded above to this computer to try to see if it can surf the Internet normally; Then connect another computer to the router, and let this computer re-obtain the network parameters (before disconnecting it was afraid that there would be an IP address conflict when setting, which would lead to the inability to access the Internet).

1. If there is a red cross on the network icon, it means that the network cable is not connected or there is a problem with the network, then you can check whether the network cable is plugged in or plugged in the wrong position.

2. If the red cross is not displayed, it may be that there is a problem with the network or system settings of the computer itself, or a problem with the system network card.

What should I do if you say that the network cable of the computer is plugged in and there is no network? You can check to see if there's a broken circuit or if it's not plugged in.

The process of absorbing new phenomena and new knowledge is often a process of assimilating or even reconstructing the new knowledge structure. Therefore, the content of the interactive experience should combine students' existing knowledge and common but unnoticed phenomena in their daily life, which can arouse their curiosity and sense of subjectivity, and generate a desire to explore "why didn't I notice in the past", or "I can change it."

What should I do if the computer is plugged into the network cable and there is no network1. When the computer cannot access the Internet normally after connecting to the network cable, we need to enter the "Network and Sharing Center" interface to view and enable all "disabled" local connections. Right-click on the disabled connection and select "Enable" from its right-click menu. 2. If you still can't access the Internet normally through the above methods, you need to set it on the router.

Use another computer to log in to the router admin interface. Switch to the "Advanced Settings" - "DHCP Server" tab and select "Enable DHCP Server". 3. Next, you need to check the IP address of the router and switch to the "Advanced Settings" - "LAN Port Settings" tab, from which you can view the IP address of the router.

4. In the computer that cannot access the Internet normally, open the "Run" window (press Windows+R at the same time to open it quickly), and enter "cmd" to enter the MSDOS interface. 5. From the "msdos interface" that opens, enter the command "ping -t" and press the enter key, when the prompt as shown in the figure is displayed, it means that the computer is connected to the router normally. 6. If you still can't solve the Internet problem, it is recommended to check whether the DNS is normal.

Here we can use the "360 First Aid Kit" to fix network failures. Find the "Disconnected First Aid Kit" from the "360 More Features" list and click to enter. 7. From the "360 Disconnected First Aid Kit" interface, click the "Comprehensive Detection" button, which will automatically detect all faults of the current network and try to repair them.

Steps: 1. Click the start menu to enter the "Control Panel";

2. Find and open the Network and Sharing Center.

3. Click "Set up a new connection or network";

4. Select "Connect to Internet" in the pop-up window;