My computer doesn t show up the disk when it s turned on

Use 360 to clean up the junk and fix the system with the system first aid kit1: Start Running Enter msconfig and click "Selective Start", and remove "Process File".

2: Start running regedit to open the registry.

hkey local machine software microsoft windows currentversion explorer mycomputer] path, click "file" export", let's back up this registry file first. After the backup is completed, delete mycomputer directly with all the subkeys under it.

If you don't have a backup and you're having problems, please save the following ** as a registry file (suffix. reg) to restore by importing the registry.

windows registry editor version

hex(2):25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,00,74,00,25,\

00,5c,00,73,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,63,00,6c,00,\

65,00,61,00,6e,00,6d,00,67,00,72,00,2e,00,65,00,78,00,65,00,20,00,2f,00,44,\

d: Desktop"

portable devices"

portable media devices"

scanners & cameras"

web folder"

Okay, so after that, you restart the computer, and then turn on my computer to see, is it a lot faster? There's no more of that little flashlight. Scold.

Of course, the above methods can only be done if your computer is free of other viruses, some viruses will make your computer very slow, that's another thing.

Or look at the approach of a master.

The partition is hidden.

With a ghost system disk, launch the tool that finds a PQ in the installation menu.

Once inside, right-click on the hidden partition to "Unhide", and finally "Execute".

Reboot OK good luck!

There can be many reasons why your hard drive won't show up on your computer, here are some common solutions:1Hardware failure:

First of all, you need to check if the hard drive is working properly. You can try connecting the hard drive to another computer or using a different data cable and power supply to determine if it is caused by a hardware failure. 2.

Power issues: If the hard drive is not powered properly, it will also fail to display. The power adapter or data cable can be replaced for testing.

3.File System Issues: The file system in the hard drive may be corrupted or there may be a problem that prevents it from being displayed on the computer.

It can be repaired using the disk check tool that comes with Windows. 4.Driver issues:

If the computer lacks the corresponding driver or the driver is corrupted, the hard disk will not be able to display the first digit on the computer. You can check and update your computer's drivers, or reinstall your hard drive's drivers. 5.

Hard drive partition issues: If the hard drive is not partitioned properly or the partition is corrupted, it may cause no Lu Chang method to be displayed on the computer. Partition adjustments and repairs can be done using the Disk Management tool.

The disk shows that there is a hard disk, but it doesn't show up on my computer.

Dear: <>

Here is my answer: If you see a hard disk in Disk Management but can't find it in My Computer, it may be because the file system of the hard drive partition is not recognized, the partition is not assigned a drive letter, the partition is not activated, etc. You can try to resolve this issue by following these steps: Confirm that the hard drive partition has been assigned a drive letter:

Open Disk Management, right-click on the hard drive partition, select Change Drive Letter and Path, and assign one of the available drive letters. Confirm that the hard drive partition has been activated: In Disk Management, right-click on the hard drive partition and select Activate Volume to activate the partition.

Confirm that the hard disk partition format is recognized: Make sure that the hard disk partition format is recognized. If the partition format is in a Windows-supported format such as NTFS or FAT32, you should be able to see it in My Computer.

If the format is a different format, you need to install the appropriate driver to access it in Windows. Scan a hard drive: Right-click on a hard drive partition in Disk Management, select Scan for Hardware Changes, wait a few minutes, and see if the drive is displayed.

If none of the above solves the problem, more in-depth troubleshooting may be required, such as checking the hard drive connection, changing the data cable, or replacing the hard drive. It is recommended that you contact a professional computer repairer or manufacturer's technical support for assistance.

The disk shows that there is a hard disk, but it doesn't show up on my computer.

Hello dear, if the disk management tool in my computer shows a hard disk, but it does not show up in my computer, it is most likely because the hard disk is not allocated partition or formatted. You can try to fix the issue by following these steps:1

On Windows, press the "Win+R" key combination to pop up the "Run" dialog box. 2.Enter and press OK to enter the disk management interface.

3.Find the drive and see if it's "Unallocated". If so, you need to assign a partition to it, right-click the hard disk, select "New Simple Volume", and follow the wizard to allocate it.

4.If Disk Management says that the drive has partitions allocated, but it doesn't appear on my computer, it may be because the drive isn't formatted. Right-click on the hard disk, select "Format" in the menu, and follow the wizard to format the hard disk.

If none of the above methods work, then you can try to re-insert and unplug the hard drive, or replace the cable and power supply to confirm whether the connection of the hard drive is stable and whether the power supply is normal. Alternatively, you can also try to use some data recovery tools like Recuva etc to help you get back the data from that hard drive.

What should I do if the installed hard disk does not display?

See if there is a virus in your hard drive that automatically hides the files.

Right-click on My Computer, Manage Disk Management, and then right-click on each disk and assign a drive letter to see it.

According to my example, is the back of the C drive all black or green?

In that case, you can only restore the partition table by the next diskgen, and it's good to be done.

It is estimated that it is the restoration of the wizard pro, but the partition table has been destroyed. Find a ghost disk and redivide it.

Is it because you don't have other capacity for partitioning? Right click on my computer -- Disk Management -- and don't see the black leftovers (of your hard drive) in the partition and it's OK.

The landlord is rebooting the hard disk after restoring the system.,I want to know if the landlord is using the ghost installation disk to restore the system?

Now it's displayed as a C disk,C disk capacity is not 500G?,If so,It must be the entire hard disk selected by Ghost as the installation disk,So several other partitions have been merged into the C disk partition。

No, isn't it displayed on the C drive? Or you're not an administrator.

Summary. Hello, the following answers to your questions; There are generally three reasons for this situation, first, we use some computer shortcuts, which makes it conflict with the local disk of the machine, which will cause the local disk to be missing. Second, there is a problem with our computer's hard drive.

Third, the right mouse button has the function of hiding the driver name, we may hide it when using the computer, these three situations are difficult for us ordinary people to solve, I can't see the disk after opening my computer.

Hello, the following answers are made to your question of opening pants; There are generally three reasons for this situation, first, we use some computer shortcuts, which makes it conflict with the local disk of the machine, and the pure game will cause the local disk to disappear. Second, there was a problem with the hard disk of my computer.

Third, the right mouse button has the function of hiding the driver name, we may hide it when using the computer, these three situations are difficult for us ordinary people to solve, related information; :The computer disk is gone,How should Wang Kai regret set up: 1、Windows2000 and XP,These two systems have the following disk management functions,First of all, we click to open it in the performance week of the control panel,Then go to view the disk management items,You will find the local disk partition and usage。

2. If the local drive is hidden, although we can't see the disk that is trapped, but it can still be found in the computer management, and then we will continue to recover, and we change the name of the drive and the way, and then click Add in the dialog box of the change, and the disk you need can be added.

Summary. This is because the drive is not assigned a drive letter. You can assign a drive letter to the drive by following these steps:

1.Open Disk Management: Right-click My Computer, select Manage, and select Disk Management in the left panel.

2.Find unallocated drives: In Disk Management, find unallocated drives, which usually appear as black unallocated space.

3.Assign a drive letter: Right-click the unallocated drive and select "Create Simple Volume", and follow the wizard prompts, where you need to set the assigned drive letter.

4.Complete allocation: After the assignment is complete, you can see the drive letter of the drive in My Computer and can access and use it.

The disk shows that there is a hard disk, but it doesn't show up on my computer.

This is because the drive is not assigned a drive letter. You can assign a drive letter to the drive by following these steps:1

Open Disk Management: Right-click My Computer, select Manage, and select Disk Management in the left panel. 2.

Find unallocated drives: In Disk Management, if you find a drive that is not allocated, it will usually show up as a black unallocated space. 3.

Assign a drive letter: Right-click the unallocated drive and select "Create Simple Volume", and follow the wizard prompts, where you need to set the assigned drive letter. 4.

Complete allocation: After the assignment is complete, you can see the drive letter of the drive in My Computer, and can access and use it.

That is, before I reinstalled, the computer had two disks, one 1t and one 400g, and now it is fully charged.

There are only 400g left.

Is there a screenshot dear?

No. 1.Open Disk Management:

Right-click on "Roll My Computer", select "Manage", and select "Disk Management" in the left panel. 2.Find the unallocated hard hall remaining:

In Disk Management, if you find an unallocated hard drive, it will usually show up as a black unallocated space.

The 1t space has been used up, and I am using a mechanical hard disk.