Lenovo H5000 desktop how to install the system on a USB flash drive

I know,**Chinese cabbage will flash the USB flash drive,And then copy the system you want to the USB flash drive,At the same time, the computer wants to enter the BIOS settings to start from the USB disk,It's very simple not to contact me。

How to set it up:

1.First of all, boot boot press F2 to enter the BIOS

2.Go to the main BIOS page.

3.Press the left and right buttons to move the cursor to Starup, and you can see that the UEIF Legacy Boot is grayed out.

4.Move the cursor to security, you can see that there is a secure boot at the bottom, press enter to enter.

5.After entering, change the first item to disabled (the default is enabled) and press enter.

6.Then enter StarUp again, and you can see that the item you just now can change. Change this article to Legacy Only

7.Then press esc to enter this section. The first option is yes, save.

8.Then restart the computer, immediately insert the boot disk into the computer, press F12, and you can boot from the USB flash drive.

You can use shortcut keys without setting up the BIOS

Use the boot item directly to select the boot device, such as pressing F2, F8 or F12 when booting up, and the button for selecting the boot item for some computers (including desktop brand machines) is listed below.

For example, Lenovo notebook boot quickly press the F12 key.

F12: Lenovo, ThinkPad, Acer, Shenzhou, Dell (notebook), Haier, Samsung, Fujitsu, Toshiba, Founder, Tsinghua Tongfang, Gigabyte, HP (desktop).

F9: HP (notebook), BenQ (notebook).

F8: ASUS (desktop), BenQ (desktop).

ESC: ASUS (notebook), Sony, Dell (desktop) Note: There is an entrance to the BIOS installation system tutorial on the quick startup item page, applicable to win7, win8, win10, please adopt it, thank you.

Lenovo is generally F12 fast start.

The USB disk boot disk is ready.

Set the first boot to a USB drive.

Generally, it is F12, if there is no F2, turn on the U disk to start the system disk function.

Press the up and down arrows to select a specific startup device.

1. Analysis: Lenovo H5050 desktop pre-installed, can be restored to the factory, no need to reinstall, only initialization.

2. The initialization steps are as follows:

1. Slide the mouse to the right side of the window to bring up the Mega Menu - Settings - Change Computer Settings;

2. Click "Update & Restore" - "Restore";

3. "Delete everything and reinstall windows" will delete all data, initialize the system, and click start on the line.

There are three ways to reinstall the system: reinstall the system, which will only change the system in the C disk of the computer, such as the files and things in the D and E and F disks of the computer.

According to your computer configuration, you can install win7 operating system. Use the computer hard disk to install the system, you can install the win7 system, the specific operation is as follows:1Go to the win7 flagship base first.

3.Open the unzipped folder, double-click "autorun", and in the window that opens, click "Install".Can.

4.In the window that appears, the ghost image file path will be automatically added, select the partition that needs to be restored to, the default is the C drive, and click the "OK" button to install it automatically.

The second is the optical disc mounting system. It is suitable for those who have a good understanding of the BIOS settings of the computer. [[Find and enter the option containing the word "BIOS" in the Dig this BIOS interface, 1.]“advanced bios features”

2.After going to "Advanced BIOS Features", find the first boot device option with "first", "First boot device".

3."First Boot Device" option, select "CDROM" Enter, after the configuration is set, press the "F10" key on the keyboard to save and exit, then the computer will restart by itself, and the rest is to install the system automatically.

Above are the steps to set up the BIOS boot. The BIOS settings of each computer are different, so you can refer to them. Once you've learned it, you'll be able to pack the system on disc.

The third type is the USB flash drive mounting system. It is suitable for those who have a good understanding of the BIOS settings of the computer. After watching the tutorial on how to make a USB flash drive, you will use the tray system.

Go to the computer store.

Learn how to install the system.

After unzipping, you will get the file in the figure below, and click "Hard Disk Installation", different versions of the system, the name of this hard disk installer is different.

After opening the hard disk installer, open the following interface, just need to select the C disk, press OK, pay attention to the path does not contain Chinese characters.

The following interface appears, click Yes.

After pressing the operation point "Yes", the computer will be automatically restarted and the XP system will be automatically installed, without us having to manually look at the picture.

After pressing the operation point "Yes", the computer will be automatically restarted and the XP system will be automatically installed, without us having to manually look at the picture.

Installing files.

There are only a few simple steps to install the XP system on the hard disk, and the installation can be completed after rebooting.

Insert a USB flash drive or install the CD, use the arrow keys to select the USB flash drive or the installation CD to start, press Enter. When a line of English appears on the Windows system page, immediately hit any key to start the installation, and then follow the prompts.

Win7's system has good game compatibility and stable operation. The computer configuration meets the requirements of more than dual-core CPU (as long as it meets the dual core) and at least 4GB or more than 4GB of memory, it is strongly recommended that the landlord choose the win7-64-bit flagship version of the system! }

If the computer system does not completely crash, you can use the ---hard disk to install the system].

4.In the window that appears, the ghost image file path will be automatically added, select the partition that needs to be restored to, the default is the C drive, and click the "OK" button to install it automatically.

Here's how to install the computer hard disk system:

4.In the window that appears, the ghost image file path will be automatically added, select the partition that needs to be restored to, the default is the C drive, and click the "OK" button to install it automatically.