How much does a set of charcoal making equipment cost 10

A set of equipment with a daily output of about 40,000 tons is less than 40,000 on it, in the purchase of equipment manufacturers to go to the field, in addition to the quality of the equipment, but also to see whether the manufacturer is in the production of charcoal, can provide mature charcoal technology, not the equipment to buy back everything is ready. No matter which industry to do, there are losses and gains, relying on people to operate, want to do more energy on it, a good investigation, choose the right manufacturer is the first step, to find a real integrity of the equipment manufacturer is very important, in all aspects of the construction of the factory can provide you with guidance. It is not necessarily that the louder the advertisement, the better, pick some that feel real and reliable, and investigate and consult more.

Mechanism charcoal equipment this industry in our country is the most rampant industry, you must polish your eyes when buying charcoal machine equipment, don't just try to be cheap, although the technical content of charcoal machine is not high, but the profit is not low, so now there are many cottage manufacturers in the country who make a living from the production of charcoal machine, from one or two hundred thousand yuan to two or three hundred thousand yuan, but you must buy charcoal machine according to your actual situation, according to the actual situation of your raw material varieties, regional charcoal varieties to buy, as for which equipment is suitable for you, It depends on how large you are ready to do, according to the amount of investment, in short, the mechanism charcoal industry to do ten losses nine of the nine, you still think twice.

The smallest charcoal machine equipment is about 3000 yuan, and there are many types of charcoal machine equipment of Jinhe Machinery, and the ** is also relatively low.

The charcoal machine equipment ranges from tens of thousands to hundreds of thousands according to the output, and charcoal can be made for a simple 20,000 yuan.

Around 30,007

The full set of mechanism charcoal equipment includes: rod making machine, dryer, carbonization furnace, crusher.

Uses of Machine-made Charcoal:

Machine-made charcoal, also known as artificial charcoal, recycled charcoal, and smokeless clean charcoal, is a carbonaceous rod made of extrusion from wood scraps. The raw materials of cob charcoal are extensive, such as rice husks, peanut husks, cotton husks, corn cobs, corn stalks, sorghum stalks, etc., which can be used as raw materials to produce cob charcoal, with sawdust, shavings, and bamboo chips as the best.

It has high density, high calorific value, smokeless, tasteless, pollution-free, non-**, flammable, and is internationally recognized as a green environmental protection product.

Difference Between Machine-Made Charcoal and Other Charcoal::

1. Environmental protection: do not cut down trees, use bamboo and wood products waste production, and turn waste into treasure. The production of ordinary charcoal requires cutting down trees and destroying the ecological environment.

2. High energy: the fixed carbon content is about 80%, and the calorific value is 7500-8000kcal kg, while the fixed carbon content of charcoal is low, and the calorific value is about 6500kcal kg.

3. Cleanliness and hygiene: smokeless, no charcoal, no sparks during combustion, the residual ash will not float up naturally during combustion, and the ash content will be less and flammable after burning about 3% or 6%.

4. Regular shape, reasonable structure, easy to use: there is a uniform length and size, hollow or solid structure, which is conducive to combustion and use.

5. The water content is low, within 5%, and the water content of ordinary charcoal is large.

6. The product does not contain chemical substances, is non-toxic, has no peculiar smell, is non-polluting, and has the advantages of long combustion time.

What equipment do you mean include, stick making machine, dryer, carbonization furnace, crusher, 4 pieces of about 30,070, I bought a charcoal machine from Jinhong in Gongyi City, the effect is good, ** is not high. You can take a look.

Mechanism charcoal equipment contact the manufacturer.

Have you bought the equipment of "Gongyi Jinhong"? As if they were ** companies?

Don't buy Henan machines, you will regret it.

Mechanism charcoal making machine is a very good manufacturer:

1. Henan Zhengzhou Xinyou mechanism charcoal machine equipment.

The company is a manufacturer engaged in refractory materials, charcoal machine equipment, and machine-made charcoal machine equipment, providing charcoal machines and machine-made charcoal machines.

2. Zhengzhou Xinyou Heavy Industry Machinery Manufacturing ****.

The company is a collection of science and technology research and development as one of the enterprises, to the production of ball press machine and other equipment-based manufacturers, the company continues to innovate and develop, the first to obtain the ISO9001 international quality system certification of the glorious title.

3. Shoute Hongfa (Beijing) biomass energy technology ****.

Shoute Hongfa (Beijing) Biomass Energy Technology is a special steel production and operation.

It is mainly a large state-owned enterprise group.

The company is a national key special steel production base and a national first-class enterprise.

4. Henan Jinyida Machinery and Equipment Manufacturing.

Henan Jinyida Machinery Equipment Manufacturing Co., Ltd. is a manufacturer of charcoal machine series products. The manufacturer takes science and environmental protection as its own responsibility, integrates science, industry and trade, and produces five series of crushing and screening, molding, carbonization, smoke and dust removal.

5. Changde Taofayuan Biotechnology****.

Changde Taofayuan Biotechnology has a number of certifications, products all over the country, favored and praised by customers all over the country, and have a high market share in the domestic and foreign markets.

According to the market in January 2020**, it is between 1 20,000 yuan.

The bearing of the charcoal machine bears the full load of the machine, so good lubrication has a great relationship with the life of the bearing, which directly affects the service life and operation rate of the machine, so it is required that the injected lubricating oil must be clean and the seal must be good.

The equipment should be installed on the horizontal concrete foundation and fixed with anchor bolts, the installation should pay attention to the horizontal and vertical of the host and the ground, after installation, the body should be tested according to the parts, and the screws and other fixed devices should be reinforced.

Charcoal machine is divided into output, equipment, and so on.

Suitable is good, now the domestic charcoal machine production technology is quite mature, the purchase of equipment to choose a reliable manufacturer with perfect after-sales service is the most important.

The charcoal machine is configured according to the size of the output, the smallest daily output is 1 ton, the full set of investment does not exceed 40,000 yuan, and the large ones are 3 tons, 5 tons, and 10 tons. **Also different.

Charcoal making machine production line.

Charcoal Machine**.

A set with a daily output of one ton also requires hundreds of thousands. It depends on how strong you are.

According to the market in January 2020**, it is between 1 20,000 yuan.

Charcoal machine series: The equipment can crush sawdust, branches, rice husks, bamboo chips, peanut skin, furfural residue, wine residue, bagasse, corn cob, coconut shell, coffee grounds and crop straw in the south and north, and then form it into semi-finished raw materials of machine-made charcoal by high temperature, high pressure and plasticization of the molding machine.

Mechanism charcoal equipment ** generally small investment down to about 60,000, large millions of also have, mainly according to what kind of raw materials you use, the dry and wet of raw materials, the size of the output to configure the equipment. If the raw material funds are sufficient, it can be invested on a large scale. The manufacturer is responsible for installation and commissioning, technical training, and Gongyi Kaibang machinery and equipment.

According to the size of the charcoal machine, ** is definitely not the same. Just start to invest a little smaller, a day out of 1 ton of charcoal full set of equipment less than 40,000 yuan, all equipment is available, from crushing to carbonization. Moreover, the manufacturer is also responsible for installation and technical training.

Mechanism charcoal machine is also an old product, with the development of the times, now formed a generation of machine, two generation machine, three generation machine. Between 15,000 and twenty thousand.

Mechanism charcoal machine**.

Henan Genghui Machinery.

How much is a charcoal machine, this problem is more general, the purchase of charcoal machine equipment needs to know how large the production is, how large the output requirements are, the small tens of thousands of pieces can be satisfied, and the large ones range from hundreds of thousands.

Charcoal Machine, Mechanism Charcoal Machine, Charcoal Machine Equipment, Export Charcoal Machine Equipment.

How much is a set of charcoal making equipment?

How much is a ton of mechanism charcoal! Hello, glad to answer for you. Machine-made charcoal 2300 tons of machine-made charcoal, also known as machine-made charcoal, artificial charcoal, recycled charcoal, smokeless clean charcoal, is a kind of carbonaceous rod processed by extrusion of wood scraps, which is internationally recognized as a green environmental protection product.

The density of the mechanism is similar to that of coal, more than 3 times that of ordinary charcoal, and it is smokeless when burning, and it is mostly used for barbecue charcoal, and can also be used for the production of carbon disulfide and steel smelting or as supplementary fuel for boilers in industry. The raw materials of machine-made charcoal are extensive, such as rice husks, peanut shells, cotton husks, corn cobs, corn stalks, sorghum stalks, bean stalks, sawdust, sawdust, wood shavings, pine husks, and coconut husks can all be used to produce machine-made charcoal. Hope mine can help you!

Do you have any other questions?

According to the market in January 2020**, it is between 1 20,000 yuan.

Charcoal machine series: The equipment can crush sawdust, branches, rice husks, bamboo chips, furfural residue, wine residue, bagasse, corn cob hole, coconut shell, coffee grounds and crop straw in the south and north of Daqing, and then form it into machine-made charcoal semi-finished raw materials by high temperature, high pressure and plasticization of the molding machine.

The charcoal machine crushes the raw bamboo sawdust, peanut shells, corn cobs, etc. into granules within 10mm by the sawdust crusher, and then puts them into the carbonization furnace for carbonization after drying and forming by the dryer.

The charcoal produced by the charcoal machine has high density, small volume and good flammability, which can replace firewood and coal, and the product is especially suitable for burning kang for heating in autumn and winter in northern areas, heating in greenhouses or as ordinary living fuel.

The charcoal machine series equipment includes a rod making machine, a carbonization furnace, a dryer and other equipment.