How much is a set of slime drying equipment, and the price of slime drying equipment

**Inconsistent, need to be calculated according to your material, raw moisture, final moisture, heat source, output, material, etc.**, the slime dryer produced by our factory is between 6-1.5 million.

Slime dryer.

Scope of application: 1. Drying of slime, raw coal, flotation refined coal, mixed refined coal and other materials in the coal industry;

2. Drying of blast furnace slag, clay, Pengrun soil, limestone, sand, quartz stone and other materials in the construction industry

3. Drying of various metal concentrates, waste residues, tailings and other materials in the mineral processing industry;

4. Drying of non-heat-sensitive materials in the chemical industry.

Materials: slime, raw coal, flotation coal, mixed coal, blast furnace slag, clay, Pengrun soil, etc.

Product introduction: The special dryer for slime adopts a unique breaking device, which can dry the bonded slime after breaking up, increasing the contact area between the slime and the hot air, so that the heat utilization rate has been greatly improved, and the dried slime can reduce the moisture to below 10 at one time, and the dried slime can be directly used as fuel. Make slime waste into treasure.

The ** of the slime dryer needs to refer to the following factors.

First, your throughput.

Second, the energy you want to use.

Thirdly, your initial moisture content and the moisture content after drying.

Fourth, the partner you choose.

Among them, the first and third determine the energy that needs to be consumed by the treatment unit of slime, that is, the configuration of the slime dryer.

In terms of energy sources, there are currently burner heating, electric furnace wire heating, natural gas boilers, steam and other methods. The choice can be made according to local environmental requirements and energy distribution.

Look at the processing capacity, generally ranging from 200,000 to millions.

If you want to buy a Ruio drum slime dryer, this has requirements for the size of the equipment installation site, the tonnage of daily drying slime within the ideal range, the price of the finished sludge drying product, etc., you can also consult the slime drying experts of regular manufacturers and provide the most professional slime drying cost analysis and common sense of slime dryer operation.

1. Different regions. We know that the consumption level is different in different regions, so the raw materials of dryer equipment** are also different. The consumption level in some areas is relatively low, such as Henan Province, the investment in raw materials and manpower produced by Henan is lower than that of provinces with high economic development level, so Henan's slime dryer equipment is relatively favorable.

2. The model of the equipment is different. We know that in order to meet the needs of the market, slime dryer manufacturers produce more equipment models and specifications, different models have many differences, large dryer equipment volume, weight, operating rate, processing capacity, output, etc. are not the same as small dryers, so large dryers are more expensive.

3. The strength of manufacturers is different. The manufacturers of dryers on the market are large and small, so the strength of the manufacturers is not the same, the time and energy invested by the powerful manufacturers in the manufacture of dryers are different, and the quality of the equipment produced by regular dryer manufacturers is more advanced, and its equipment will be differentiated.

You get what you pay for, and there is absolutely no good good thing when it is cheap. Integrity and strength are reliable.

Web Links.

See how many tons you require? **Ranging from 25-1,000,000.

With the progress of coal mining mechanization, pulverized coal and final coal account for an increasing proportion of raw coal, which greatly increases the amount of primary coal slime in thermal coal washing plants and flotation tailings in coking coal washing plants. As a by-product produced in the washing process, slime has the characteristics of fine particle size, strong water holding capacity, high ash content, and contains more clay, which brings many inconveniences to the comprehensive utilization of coal slime. In the face of increasingly scarce coal resources and high coal, slime drying and reuse is imminent, and the production of slime drying equipment conforms to this market demand.

However, more and more slime drying equipment appears on the market, and the majority of slime drying equipment investors are most concerned about the quality of the slime drying equipment, because of the market demand, the slime drying equipment has always been high and low, and the country has no specific positioning. The following Nanyang will do a few reasons for the impact of the slime drying equipment, first, the slime drying equipment first depends on the steel **, that is, the raw material. For example, in the first half of 09, the steel has been at a low price, compared to the first half of 09 slime dryer equipment, it is lower than before.

Second, the second factor affecting the slime drying equipment depends on the quality, the quality of the manufacturer, relative to the first than those manufacturers who are not guaranteed.

Third, the impact of slime drying equipment also depends on the size of the production of slime dryer equipment factory, the equipment of large factories will go according to the amount, so the first will be relatively low.

Nanyang is currently engaged in the research and development of slime drying equipment professional and authoritative enterprises, is the domestic drying industry design, production, sales in one of the science and technology enterprises, after rapid and steady development in recent years, has gradually become a brand company in the domestic drying equipment industry. Due to the high moisture, high viscosity, high water holding capacity and low calorific value and many other unfavorable conditions, it is difficult to achieve industrial utilization, our company convened drying experts for the current slime industry market and the characteristics of slime around the country, to carry out technical research and practice again and again, carefully build energy-saving slime drying equipment, through practice, Nanyang energy-saving slime drying equipment drying cost is low; Reduced load on the dust collection system; Eliminate the sticking phenomenon on the inner wall of the cylinder; When drying the slime, the moisture content of the product can reach less than 8%, and the particle size can be controlled below 8mm.

Slime drying equipment** is determined according to the output, model, and quality of the slime dryer. Therefore** does not wait, but the price is a penny, it is recommended to talk on the basis of qualified quality**.

What is the size of the slime drying equipment you request, 500 tons or 1000 tons? Learn more about contacting the slime dryer manufacturer Dongding Drying.

Slime drying equipment** and the size of the investment project, the status of the slime are related, you can go to Dongding drying to understand, my friend is in Dongding drying equipment, go to see it.

Large-scale slime drying equipment can consult Zhengzhou Dongding drying, and domestic large-scale power plants, coal washing enterprises have cooperation, the most cost-effective.

You can ask Henan Changsheng Machinery Manufacturing Company for inquiry.

1.Daily maintenance Wipe the device daily with a soft cotton cloth to keep it neat and tidy. Check the air source triplet before starting every day, add lubricating oil when the oil level is insufficient, and discharge the stored water.

Clean the lint in the dust box every day to ensure good ventilation and make the equipment play the best drying effect. 2.Monthly Maintenance Open the rear lid and clean the inside of the unit with a soft cotton cloth.

Lubricating moving parts such as bearings are lubricated to reduce friction. Check the belt tension and adjust the pulley. Fix the parts that are easy to loosen and fall off after vibration, including electrical wiring, door rocker arms, pipe connections, etc.

3.Annual Maintenance Check that the fixing bolts of the frame are loose and strong. Check the tightness of the support spring connection and adjust it from time to time.

Check the grounding of the equipment and ensure that it is reliable. Check the flexibility of the computer board controls, wind turbines, and heat exchangers. The temperature gauge and other instruments on the equipment are sent to the local technical supervision bureau for measurement.

Buy a slime dryer and come to Henan Changle Machinery ****.

1. Application range of slime dryer.

Slime dryer (slime dryer) is a new type of special slime drying equipment developed on the basis of drum dryer, which can be widely used in:

1. Drying of slime, raw coal, flotation refined coal, mixed refined coal and other materials in the coal industry;

2. Drying of blast furnace slag, clay, Pengrun soil, limestone, sand, quartz stone and other materials in the construction industry

3. Drying of various metal concentrates, waste residues, tailings and other materials in the mineral processing industry;

4. Drying of non-heat-sensitive materials in the chemical industry.

2. Slime dryer (slime dryer) product features.

The slime dryer is reasonable, and it is an excellent enterprise among the slime dryer (peat dryer) manufacturers, and its slime drying equipment is characterized by.

1. The slime dryer (peat dryer) has strong anti-overload capacity, large processing capacity, low fuel consumption and low drying cost;

2. Adopting the downstream drying method, the flue gas and wet materials enter the dryer from the same side, and the high temperature flue gas can be used to obtain high evaporation intensity, and the outlet temperature of the dryer is low and the thermal efficiency is high;

3. The operating parameters can be changed according to the properties of different materials, so that the materials can form a stable full-cut fabric curtain in the dryer cylinder, and the quality and heat exchange are more sufficient;

4. The new feeding and discharging device eliminates the phenomenon of feeding blockage, discontinuity, unevenness and return of the slime dryer, and reduces the load of the dust removal system;

5. The new internal structure strengthens the cleaning and heat conduction of dispersed materials, eliminates the sticking phenomenon on the inner wall of the cylinder, and has stronger adaptability to the moisture and viscosity of materials;

6. The slime dryer realizes "zero horizontal thrust", which greatly reduces the wear of the supporting wheel, and the cylinder runs smoothly and reliably;

7. The peat dryer adopts a "self-aligning supporting roller device", so that the cooperation between the supporting roller and the roller ring is always in linear contact, which greatly reduces the wear and power loss;

8. The particle size and moisture of the product can be controlled according to the user's requirements, and the moisture of the product can reach less than 8% when drying the slime, and the particle size can be controlled below 8mm.

The slime dryer must be inspected more, and it is recommended to go to Dongding Drying to investigate, the promoter of large-scale slime thermal dryer technology, go and see it.

Go to Gongyi Yongsheng Machinery Network to take a look. There is an inquiry ** above.

To choose a slime dryer manufacturer, you need to understand the relevant information of the slime dryer, according to these targeted choices, Henan Red Star Company is very good.

The slime dryer is a more versatile dryer equipment, the slime dryer adopts a unique breaking device, which can dry the bonded slime after breaking up, increasing the contact area between the slime and the hot air, so that the heat utilization rate has been greatly improved, the slime after the slime dryer drying can reduce the moisture to 12% at one time, and the dried slime of the drying equipment can be directly used as fuel. Make slime waste into treasure. In addition, after years of unremitting efforts, the R&D department of our company can use the boiler exhaust gas as the heating heat source of the slime dryer, and successfully launched the boiler exhaust gas dryer.

There is no investment in heating, and there is no cost in heating. Really energy-saving drying, real energy-saving and environmentally friendly dryer equipment.

How dryer equipment works:

The heat source of the dryer equipment comes from the combustion device, and the slime dryer (drying equipment) adopts the downstream heating method. Therefore, the materials that need to be dried slip into the cylinder from the feed box and the feed, that is, they are pushed back by the spiral copy plate. Due to the inclined placement of the dryer equipment, on the one hand, the material flows to the rear end under the action of gravity and rotation, on the other hand, the material is repeatedly copied by the copy board, brought to the upper end and then continuously sprinkled down, so that the material forms a uniform curtain in the cylinder, and fully exchanges heat with the hot air flow in the cylinder.

When purchasing slime drying equipment, you can start from the overall strength of the enterprise, professionalism, customer practicality, and technical exchanges, professional manufacturers of slime drying equipment in the Central Plains It is said that Dingli Drying Company is the earliest professional manufacturer of coal slime drying equipment in the region, you can go to the first inspection.

I heard that the slime dryer produced by the research and development of Jiaozuo real energy-saving drying equipment is good, their slime dryer is fully utilized in thermal energy, and the energy consumption is particularly low, it seems that the slime dryer used by the coking coal group is theirs.

For information about the slime dryer, you can see the following slime dryer topic**, if you have any questions, you can consult it.

This is related to the technical level of the manufacturer, a drying is not dry, or it will not cause a lot of energy consumption, you need to solve this problem can contact Dongding drying.

The slime drying project is a systematic project, and the configuration of all parts must be in place, including whether the technical process is mature and matching, equipment installation and commissioning, etc. Zhengzhou Dingli Drying is a manufacturer specializing in the production of slime dryers, and the expert design and construction team tailor-made for you to build a complete set of energy-saving, efficient and environmentally friendly slime drying production lines. At present, the equipment has been put into use in many slime washing enterprises in Henan, Anhui, Heilongjiang, Guizhou and other countries, and has created considerable economic benefits.

The slime dryer rotates at low speed, but the speed of the transmission motor is relatively high, so the deceleration of the transmission system is relatively large, so the deceleration system of the dryer must be reasonably selected.

The appearance and weight of the slime dryer are large, and a large circumferential force will be generated on the low-speed gear, so you must pay attention to the requirements of large speed ratio and large torque on the parts.

When starting the slime dryer, it is not only necessary to restrain the friction torque between the supporting wheel shaft and the bearing, but also to restrain the moment of inertia of the rotating cylinder and the material, so the motor with large starting torque should be selected.

Pay attention to the time it takes for the material to complete the physical and chemical changes in the dryer equipment.

In order to ensure the long-term safe operation of the slime dryer, in addition to ensuring the requirements of the slime horizontally rigid and longitudinal soft, the smooth and reliable transmission is an important condition.