Tips for maintaining flowers, how to raise flowers Tips for maintaining flowers

There are three main ways to maintain flowers: one cut, two picks, and three preservation. If you master these three maintenance tips, you can greatly extend the appreciation time of flowers.

"Before inserting the flowers into the vase, the flower feet should be cut again. Because after the flower is cut from the plant, in order to protect itself, a "seal" will be formed at the "wound", but if the seal is sealed, it will affect the flower to absorb the water in the vase, and the flower will of course wilt quickly. Moreover, bacteria will also accumulate in the "wound" of flowers, so our first trick is to cut, cut the flower feet at an angle of 45 degrees and cut them short by 2 3 cm, on the one hand, the seal is opened, on the other hand, the bacteria are cut off, and the pipe of the flower water absorption is also unblocked, of course, the flower can bloom longer.

"Some people think that the leaves of plants help flowers to photosynthesize, and they are also useful for flowers inserted in vases, and they cannot be removed. Actually, this is not true, because after the flowers leave the plant, the photosynthesis of the leaves is much weaker, and it is no longer needed as much. In addition, too many leaves will also cause the consumption of nutrients and water, which will affect the viewing time of flowers.

At the same time, if the leaves are immersed in water, it will cause rot for a long time, breed bacteria, and affect the flowering period. Therefore, after the flowers are brought home, some of the leaves should be properly removed, and the leaves near the feet of the flowers are best picked clean, which can help prolong the viewing period of the flowers.

"Three plus" adds a suitable preservative to the flowers. We can choose professional flower preservatives, add according to the instructions for use, different flowers can choose special preservatives, such as roses, lilies, etc., are very "appetite" for flowers. You can also "refuel" flowers with some common household items.

There are two major directions for adding preservatives, one is disinfection, and the other is offering. To disinfect we can use 84 disinfectant, detergent, aspirin, alcohol, and some sugar can be added to the offering. No matter what direction the preservative does not need to be added very large, just a few drops.

At the same time, flowers prefer shady places and should not have direct sunlight. If you are not using a professional preservative, it is best to change the water every day, so that good roses and lilies can have an appreciation period of about a week. When storing, it must be upright and not flat, otherwise the flower stems are easy to bend.

Re-cut the flower stems and insert them into the water to absorb water, but be careful not to contain chlorine (bleach) in the water, which will cause the leaves to wither. Removing the small flower buds at the top of the inflorescence reduces tip curvature and promotes the opening of other flower buds. Refrigerated flowers are best inserted into water containing preservatives when used, and the opening effect is better and long-lasting.

Prepare a vase, add half of the water, then pour in half a packet of nutrient solution and stir well. Arrange the flowers: Remove two-thirds of the leaves, remove the injured or cracked petals, and do not soak the leaves in water, as the leaves will rot.

Arrange the flowers in the way you like, and trim the length of the flowers by comparing the height of the vase. The roots of the flowers should be cut diagonally at 45°, so that the area of water absorption is large. By cutting the roots and changing the water every day, the flowers can better absorb water and nutrients.

Put the sorted flowers into the vase and our flower care steps are complete!

Note: 1. When taking flowers, move gently. Flowers are delicate and vulnerable, and they can be "broken" if they are not careful

2. Pay attention to changing the water every day. Flowers rely on water to sustain life, and the quality of water directly affects the life of flowers. It is necessary to change the water every day, if the water is added with a nutrient solution, you can change it every 2-3 days.

Remember to rinse the roots of the flowers every time you change the water to avoid bacterial growth.

3. Clean up the flowers regularly. If the petals or leaves appear to be rotten, they should be picked in time to avoid infection to a fresh place.

4. Pay attention to the temperature. Suitable temperature storage can prolong the life of flowers, and the suitable temperature is generally about 10 degrees to 20 degrees.

1. Prepare a vase: use a transparent vase to facilitate the change of water quality and flower branches.

2. Shade maintenance: It should be placed in a cool and cool position indoors, and receiving direct sunlight or high temperature will accelerate the withering of flowers.

3. Change water frequently: you can change the water once every 2-3 days, and change the water every other day in summer.

4. Pruning: Cut off a section of the flower branch when changing the water, which can help better absorb water during the period.

5. Supplement nutrients: add nutrient solution, vitamin C or sugar to the water, which can keep it fresh.

The maintenance method of flowers, now many families like to buy some flowers back to decorate the home. But flowers are easy to adjust, how to maintain flowers as cut flowers, how to prolong the flowering period? Let's take a look at how to care for flowers.

1. Proper pruning

Whether it is a purchased flower or a cut of the flowers yourself, if you want to keep it fresher better, you need to prune it first. The main thing is to prune the bottom of the flower branches, and the bottom is cut into a beveled mouth. It is also necessary to remove the leaves at the bottom, and do not let the leaves get wet, so as to avoid causing rot and affecting the freshness of the flowers.

Second, the awakening treatment

If the flowers have already wilted, they need to be awakened before they are raised in water. Soak the flower branch in water to let it fully absorb enough water, which is beneficial to the preservation of freshness in the later stage. Note that it is best not to get the flower part in water during soaking to avoid rotting. Just soak the flower branches in water.

3. Change the water regularly

The treated flower branches can be placed in a container and then added with water for water cultivation. During the water cultivation period, you must change the water frequently and pay attention to the water quality. Usually, the water needs to be changed once every one to two days to keep the flowers fresher for longer.

If you do not change the water for a long time, it is easy to cause odor and rot. Note that it is best to prune the flower branches properly and cut off a part of the water when changing the water, which can help it better absorb water and keep it fresh.

Fourth, add sugar

If you want flowers to keep them fresher, you can add sugar to the water, which can help the incision better absorb water, so as to avoid the leaves and flowers from drying out due to lack of moisture. Or add a few drops of cola and preservatives to the water, which can play a good role in preserving and prolong the freshness time.

Fifth, the environment is suitable

During the period of flower water cultivation, in addition to paying attention to the method, we should also pay attention to the provision. Environment. It is best to put it in a warm, well-ventilated and slightly shady environment, without exposure to the sun, otherwise the flowers are easy to dehydrate and dry up.

1. Preservative

Putting a preservative in a vase with flowers can prolong the shelf life. If there is no preservative, potassium permanganate can also be used, or edible salt can have the same effect.

2. Tea method

Flowers without roots are easy to wither and usually wilt after a few days when placed in a vase. If you pour some strong tea into the vase, it will make the flowers fresher and increase the original aroma, which will keep them for a week without withering.

3. Beer Law

If you want to keep the flowers in the right amount of beer, because beer contains ethanol, which can help disinfect the stem cut. At the same time, the sugar contained in it can provide it with the nutrients it needs and can prolong the preservation time of flowers.

4. Scalding method

To preserve flowers, you can soak the flower branches in hot water for about two minutes. Soaking in cold water after taking it out of hot water can block the incision and prevent the flowers from spilling out.

Winter temperatures are cooler, and flowers are usually less cold-tolerant, so it's best to move indoors in time for maintenance, and also pay attention to the temperature control of the disturbance brigade. The temperature is best between 20 and 25 degrees, too low can frostbite the plant and affect growth. In addition, if it is a low temperature environment, you can pour warm water to maintain normal metabolism.

The sun is mild in winter, so put it in a sunny place and get plenty of sun. If the light is insufficient, it will not be able to carry out photosynthesis well, which will easily cause the flowers to wither. Under normal circumstances, the time to see light is between six and eight hours a day.

Flowers like to grow in a slightly humid environment, usually the humidity should be about 45%, and the winter is relatively dry, so it should be moisturized. You can sprinkle an appropriate amount of water around the plant in the sunny afternoon, or cover it with a plastic bag to increase the humidity through the action of the photosynthetic stool.

During the winter maintenance period, it is necessary to pay attention to the control of water quantity, and do not need to water if it is not dry. Normally, Li Liang can replenish water once every ten days or so to avoid watering too often and freezing the soil, otherwise it will seriously affect growth.

When maintaining flowers in winter, put them in a ventilated and cool environment with sufficient diffuse sunlight to promote metabolism; The temperature of the growing environment is controlled between 20 and 25 to avoid low temperature causing flowers to wilt; Ensure that the humidity in the environment is about 45%, and spray and bagging methods can be used to moisturize; Winter is the dormant period of flowers, no need to fertilize, watering follows the principle of watering when dry.

Many people ask what is the method of winter flower maintenance, in the winter maintenance of flowers should first ensure that the sun is sufficient, to avoid the lack of light caused by the withering of flowers, because most flowers in winter will carry out photosynthesis, promote the metabolism in the plant to maintain growth, can be placed in a ventilated and cool place with 6 8 hours of scattered sunlight every day for maintenance.

When winter comes, it is necessary to move the envy cherry blossoms to the indoor maintenance in November every year, and the growth temperature should be guaranteed between 20 and 25 to avoid low temperature affecting the growth of plants and even leading to death, when the temperature reaches below 10, you can use about 23 26 warm water to water the flowers, promote the digestive tissue in the plant to maintain normal metabolic function.

The air environment is relatively dry in winter, but the humidity in the flower growth environment should be guaranteed to be about 45%, you can spray and moisturize the branches and leaves of flowers and the surroundings in the middle of the day, or you can use plastic bags to wrap the flowers, and use photosynthesis to increase the humidity in the air.

Most of the flowers are in the dormant period in winter, and the demand for fertilizer is less, so you can apply a thin fertilizer every 15 to 25 days, but it is necessary to avoid excessive fertilization and lead to root rot caused by the clumps, which will affect the growth of flowers; When applying water, follow the principle of watering less and applying more, and apply the amount of water every 8 to 10 days.