How do ASUS M4A77TD manually adjust CPU fan speed?

First of all, you need to make sure that your fan is a 4-pin fan, and then you need to turn on the Q-Fan function in the BIOS, there are two kinds of Q-fan options: automatic and manual, automatic adjustment can generally meet the ordinary mute requirements, you can choose manual adjustment, summer is coming, the temperature will be relatively high, you can set the starting temperature 40, the starting speed 20% (this value is just a relative value, to try according to the fan, some fans 20% may only have a few hundred revolutions, and some may have 2 3000 rpm, Try to find a satisfactory speed), with a maximum temperature of 60 degrees Celsius. ASUS's BIOS generally starts by pressing the F2 or Delete key and paying attention to the boot prompt. In addition, we recommend a fan adjustment software used under Windows, speedfan, a very powerful software, which occupies a small amount of memory, and can adjust the CPU fan, graphics card fan, host fan, etc., and the settings are free.

Much more powerful than Q-Fan.

We hope you find the above reply helpful.

Go to the electronics market and spend 5 yuan to buy a governor and install it, and you can adjust it.

Your fan must be 3-pin.

Only 4-pin fans support PWM function.

You can search for what you can do yourself, and I won't say much about what you can get.

Do you think the wind speed is fast or slow? If it's fast, you can connect the deceleration wire in series on the fan wire, one yuan a piece, cheap and easy to use.

Manual adjustment is not recommended.

No matter how you adjust it, you can't adjust it automatically.

ASUS motherboards can be used to set the CPU fan speed in the Monitor option in the BIOS. The specific setup steps are as follows:

1. Press "DEL" or "F2" to enter the BIOS after powering on;

2. Select to monitor by pressing the right arrow key on the keyboard;

3. The CPU Fan Speed option under the Monitor tab is the setting of the CPU fan speed.

After the settings are completed, click the F10 button to save the settings in the BIOS, and the machine will restart with its own register.

ASUS motherboards can set the CPU fan speed by going to the Monitor option in the BIOS. The steps are as follows:

1. Press "DEL" or "F2" to enter the BIOS after powering on;

2. Select to monitor by pressing the right arrow key on the keyboard;

3. The CPU Fan Speed option under the Monitor tab is the setting of the CPU fan speed.

After the settings are completed, click the F10 key to save the settings in the BIOS, and the machine will automatically restart.

You can go into the BIOS to set the CPU fan speed adjustment:1manual adjustment; 2.Adjust according to temperature; 3.Adjust according to speed. You can just adjust it yourself. Good luck!

Hello, you can go into the BIOS to set the CPU fan speed adjustment:1manual adjustment; 2.Adjust according to temperature; 3.Adjust according to speed. Hope the above information can help you!

I'm using this MB as well.

First of all, don't know why you want to adjust the speed of the fan?

If your fan doesn't rotate or rotates very slowly, it may be connected to the wrong wire or the fan is aging, and you can replace it with a new one, and more than a dozen pieces can be used.

If you really want to adjust, just turn on the computer and press the DEL, the decimal point button, enter the BIOS, press the right arrow, select Advanced, press the arrow to find Cool'n'quiet, set it to disabled, but instead of adjusting the fan speed, it just keeps the fan speed at maximum speed.

If you want to adjust the fan speed precisely, on the one hand, it is not necessary, and on the other hand, this motherboard does not have this function ......