What does it mean for the little swan washing machine to appear E4

Little SwanFully automatic washing machine failure** shows E4, which is a water level sensor fault.

Troubleshooting:

1. Check whether the water level sensor is abnormal, most of it is caused by the humid environment, it is recommended to disassemble the control panel base, first use a hair dryer to blow and see, the general situation can be solved.

2. The connection between the water level sensor and the socket on the computer board is not good, so it is recommended to adjust and re-plug it.

3. The plug of the water level sensor is not in good contact with the water level sensor, so it is recommended to adjust and re-plug it.

4. If the detection circuit of the computer board fails, it is recommended to repair or replace the computer board.

5. If the internal fault of the water level sensor is faulty, it is recommended to replace the water level sensor.

6. It is recommended to contact the after-sales department.

Precautions for Little Swan automatic washing machine

1. Before washing, check whether there are matchsticks, hairpins or coins and other sundries in the washed clothes, and if so, take them all out;

2. When you choose the "washing" or "rinsing" program, the wave wheel will not run until the selected water level, so don't be in a hurry or think that the washing machine is broken, wait patiently for a while;

3. During the "dehydration" procedure, the cover must be closed, and the cover should not be opened from time to time;

4. Never touch the washing and dehydration bucket with your hands, so as not to get your hands involved and cause danger.

What does it mean when the washing machine shows e4, is it faulty, and how to solve it.

Water ingress timeout failure.

Here's how to fix it:

1. Check whether the water pressure of the water faucet of the washing machine is normal, if it is not normal, it has nothing to do with the washing machine, and the main check is the water pressure problem.

2. Check whether the filter screen of the washing machine inlet is blocked, in order to avoid the sediment and floating objects in the tap water from entering the washing machine, there will be a small filter screen at the water inlet. If the water quality is not good, it will be clogged.

Precautions for the use of washing machines.

The water flow program is selected according to the clothing material; If the fabric is thinner, a gentle flow of water should be applied, otherwise, a normal flow of water should be chosen.

The washing procedure is determined according to the amount of clothing and the extent of the stolen goods; If the laundry is thick and the stolen goods are washed, the standard washing method should be chosen, and the economical procedure should be selected otherwise.

Once all program selections are complete, press the Start pause button and the washing machine will start working. At the end of the operation, the buzzer will beep several times in a row, and only one of the usual indicator lights will be on.

Little Swan Automatic Washing Machine Failure** shows E4, which is a water level sensor fault.

Troubleshooting method: Check whether the water level sensor is abnormal, most of which are caused by humid environment. Just blow dry.

The predecessor of Wuxi Little Swan Co., Ltd. was founded in 1958.

From the birth of China's first automatic washing machine in 1978 to the brand value of 100 million yuan in 2010, it has become one of the few world's largest washing machine manufacturers that can manufacture all kinds of washing machines at the same time, including automatic washing machines, drum washing machines and mixer washing machines.

Little Swan has a state-level enterprise technology center and a nationally recognized laboratory, relying on technology strategic alliances, insisting on independent innovation, and has the world's leading frequency conversion technology, intelligent drive control, structural design and industrial design and other washing core technologies.

Development History:

The predecessor of Wuxi Little Swan Co., Ltd. was founded in 1958. From the birth of China's first automatic washing machine in 1978 to the brand value of 100 million yuan in 2010, it has become the world's third largest washing machine manufacturer that can manufacture all kinds of washing machines with automatic rollers, drums and stirring types at the same time.

In 2010, the world's first Internet of Things washing machine was launched, and in 2012, the first domestic heat pump dryer, the first iAdd automatic washing machine, and the world's first Internet of Things automatic washing machine were launched.

It can be said that as the earliest development of China's washing machine market, and the only enterprise that is still in the market leader, the development and growth history of Little Swan is a history of innovation and strengthening of China's washing machine industry.

The above content reference: Encyclopedia - Little Swan Washing Machine.

Wait a minute. Hello, glad to answer for you! The washing machine shows E4 on behalf of abnormal dehydration, causes and solutions:

1. When the washing machine is not dehydrated, first check whether there is water in the washing machine, if there is water, you can first open the drain valve to see if there is a foreign object inside, the user disconnects the power supply and turns on the front baffle of the washing machine to unscrew the drain valve in the lower right corner to drain the water, the washing machine computer board will show E4 fault if there is no drainage**, if there is a foreign body taken out, install the drain valve switch and test the machine should be normal. 2. The washing machine is unbalanced when it is dehydrated due to too little clothing or not let go, but the washing machine itself can still be balanced, the user opens the door and takes out the clothes and shakes them into the washing machine to restart the washing machine to a single dehydration program, and the washing machine will be readjusted for dehydration after starting, and the washing machine is pressed to see if it is placed stable. 3. If the above two situations cannot be solved, the performance of the washing machine may be faulty, and the engineer needs to come to repair, I hope mine will help you.

Little Swan washing machine E4 failure refers to the failure of the water level sensor, under normal circumstances, the Little Swan washing machine E4 failure will be manifested as no response after turning on, and the indicator light will not be on, so you must pay attention when using the washing machine.

The solution to the failure of the Little Swan washing machine E4 is relatively simple, and the specific method steps are as follows:

1. First of all, you need to check whether the water level sensor is abnormal, most of it is due to the humidity of the environment, it is recommended to disassemble the control panel base, first use a hair dryer to blow and see, the general situation can be solved.

2. Then check whether the water level sensor of the washing machine is in poor contact with the socket on the computer board, and if the contact is not good, it is recommended to adjust and re-plug it.

3. The plug of the water level rising slow sensor is not in good contact with the water level sensor, so it is recommended to adjust and re-plug it.

4. If the detection circuit of the computer board fails, it is recommended to repair or replace the computer board.

5. If the internal fault of the water level sensor is faulty, it is recommended to replace the water level sensor.

The appearance of "e64" in the drum washing machine is a fuse.

Caused by fuses. 1. Possible causes of failure due to normal circuit: 1. The power supply voltage is too low. When the supply voltage is below the minimum limit, if the load does not change, the current of the motor and the electromagnet will increase, and the fuse will be blown out.

2. The power supply voltage is too high. If the power supply voltage is too high, it will make the motor air gap flux.

As it increases, the current increases rapidly, which burns out the windings or fuses of the motor. 3. The load piece is overloaded. In the abnormal use of the washing machine, such as the wave wheel hidden boy or the spinning bucket is stuck, the transmission mechanism produces shaft failure, bearing damage, etc., so that the motor is overloaded or stalled for a long time, and the electromagnet can not be completely engaged due to failure, which will make the current increase rapidly, thereby burning the motor winding or fuse.

The specific cause of the overload of the load piece should be identified so that it can be ruled out. 2. Handling method: 1. If the washing machine is a new machine, it is generally an alarm caused by an operation error, and the frequency conversion board will not be damaged.

2. If the washing machine is an old machine, the inverter board is likely to be damaged, and it is recommended to contact professional after-sales personnel to replace it.

Little SwanWashing machine failure**: E1 indicates that the washing machine is in water or has no sleep timeout; e2 indicates that the water level sensor has not been reset after 6 minutes of draining; E3 indicates the front door when dehydrated.

Shut down; e4 indicates that the third collision occurred in the same process of the stove; E5 indicates low voltage protection; e6 indicates that the washing machine is not available for appointment time; e7 indicates that the weighing correction process is not.

Empty bucket status;

The water level sensor is faulty.

The fault of the Little Swan washing machine E4 refers to the failure of the water level sensor, generally the fault of the Little Swan washing machine E4 does not respond after the power is turned on, and the indicator light is not on, so you must pay attention when using the washing machine.

First of all, you need to check whether there is any abnormality in the water level sensor, most of which are caused by the humid environment. It is recommended to remove the base of the control cabinet and blow it with a hair dryer first, and the ordinary situation can be solved. Then, check whether the water level sensor cable of the washing machine is in poor contact with the socket on the computer board, if the contact is not good, it is recommended to adjust it and reconnect it.

The insert of the water level sensor is in poor contact with the connecting wire of the water level sensor, so it is recommended to adjust it and reconnect it. If the detection circuit of the computer motherboard is faulty, it is recommended to repair or replace the computer motherboard. There is a malfunction inside the water level sensor, and it is recommended to replace the water level sensor.

Fault**F1 washing machine water level sensor is in poor contact. Fault: The drain of the E1 washing machine is overdue. Check if the drain is blocked.

Fault**The upper lid of the E2 washing machine is not properly covered. Fault**The dehydration balance of the E3 washing machine is not good, so it is necessary to re-shake the clothes and dehydrate. Fault**E4 washing machine water supply timeout.

Check the water pressure and water supply valve for dirt and blockage. Fault: The water temperature of the E5 washing machine exceeded 50 degrees. Fault** Whether the E6 washing machine uses a high foam detergent.

Little Swan automatic washing machine failure** shows E4, which is due to the failure of the water level sensor, the water pressure is low, or the filter is dirty and blocked, and there is no water ingress, or the water inlet is slow. Check that the faucet is turned on, it is recommended to turn on the faucet.

Hello, the Little Swan automatic washing machine failure ** shows e4, it is the water level sensor failure, the water pressure is low, or the filter screen is dirty and blocked, and there is no water ingress, or the water inlet is slow. Solution: (1) Check whether the faucet is turned on, it is recommended to turn on the faucet.

2) Check if there is any water outage in your home. (3) Please check whether the inlet water pressure is too small, and it is recommended to use it again when the water pressure is stable. (4) Please unscrew the water inlet pipe from the washing machine, check whether the filter screen of the water inlet valve is blocked by debris, and clean the filter screen of the valve port of the water inlet pipe with a small brush (such as a toothbrush).

When the Little Swan washing machine is dehydrated, does it mean that it is broken? Is that because you have too many clothes? That's why it's only when you're dehydrated that you're in this condition.

When the Little Swan washing machine is dehydrated, it shows that the E4 can be solved by self-cleaning of the washing machine.

The specific steps are as follows:

1. First of all, plug in the power supply of Midea's automatic washing machine, as shown in the figure below.

2. Then open the water pipe, as shown in the figure below.

3. Open the door panel of the washing machine, as shown in the figure below.

4. Pour an appropriate amount of special detergent for washing machines directly into the washing machine barrel, as shown in the figure below.

5. Then close the door panel of the washing machine tightly, as shown in the figure below.

6. Button to select the "Bucket Self-cleaning" function, as shown in the figure below.

7. Turn on the power of the washing machine to start, as shown in the figure below.

8. This is the self-cleaning function of the washing machine, as shown in the figure below.

My washing machine does my laundry normally. It's just that when it comes to throwing dry, it's the teacher who hits the wall. xqb55/2078g ..If you find it too troublesome to adjust, you can open the lid when washing clothes, and the washing machine will give an alarm when it comes to the dehydration program.

Hello dear, happy to serve you. I'm a technology tycoon, a professional consultant in the field of electronics. I have seen your question, you can also provide more effective information to better answer for you, we are sorting out the answer for you, and we will reply to you in about five minutes, please wait a moment

Motor thermal protector action.

Look at the lid of the washing machine, there is it inside, and it is usually repaired by a maintenance worker.

Do you call the police? There is an alarm, it may be because the door switch is broken.