Which is the employment situation of electrical graduates and software and hardware development lear

It seems that the electrical major does not contradict the software and hardware development studies you said.

Graduates of electrical engineering are basically engaged in software and hardware development, and electronic information is also in the scope of software and hardware. I don't know how you understand that.

Now the professional boundaries are no longer obvious, and no one stipulates what can only be done to learn electronic information, and what can only be done by studying electrical.

The first employment depends on your plasticity, and the more you know, the stronger your plasticity. The more you know, the more options you have to find a job. After that, employment depends on your experience, whether you have the relevant work experience required for the new job.

You don't have to care too much about the difference between these two majors, as long as you feel that the new class can allow you to learn more and more refined knowledge than the original class, then go for it, knowledge is the last word. As long as you have the ability, you must choose the job, and then think carefully about which job to choose.

I wish you success! In addition, when studying, you must learn both soft and hard, because many times the work is soft and hard. Besides, understanding software is helpful for hardware development, and understanding hardware is also helpful for program understanding. There will only be one, and there are limitations in actual work.

Go and learn, multiple abilities and multiple paths!

I am also an electrical major, and I will not give up this opportunity if I want it (if the cost is not high), because it is difficult to say what will happen in the future, so it is a good thing to lay more foundations in school, and I support you.

But it's best to keep your diploma in your major, otherwise you may end up losing more than you gain!

If you want to achieve a certain success in the electrical industry in the future, you can't only software or only hardware, they are all very important, but relative to my experience, if you are a student now, what you can work on now and can achieve certain results is to concentrate on software, hardware things need a certain amount of on-site experience, when you walk in the job you must first be familiar with the on-site hardware, and use the software you have mastered to interpret the site, so that you will progress quickly. The final belonging of learning is the society and the field, the place that can make you progress fast is the place where you fight, not on the study paper, under the premise that you can successfully get the certificate you should get after graduation, I support you to participate in more practice, but I want to emphasize that the certificate is also very important, and now the society needs this stepping stone. Education + ability is what you need to succeed in today's society.

No one can say clearly, there is a way to go to the recruitment ** to see which position to recruit more units to choose which major, indicating that the market needs to recommend a special recruitment of technical personnel **China R & D technical personnel**, which is all recruiting technical positions of the unit to make a comparison.

The employment situation is good, are you a recent graduate? There are also a lot of large electrical enterprises, such as Schneider, ABB, you can go to the electric power major to see some industry trends, such as Polaris, there are a lot of news trends, and job hunting, I just found a job there, and I am very satisfied with it

Circuit Principle, Electronic Technology Basics, Electrical Machinery, Power Electronics Technology, Computer Technology (Language, Software Basics, Hardware Basics, MCU, etc.) Signals and Systems, Automatic Control Theory, Power System Analysis, Electrical Control Technology, Detection and Conversion Technology, etc. You can have a good electrical engineering major at Xi'an Jiaotong University and you are on the **.

Very good, provided you are an electrical master.

First of all, I graduated from this major. To be honest, it is not difficult to find a job in electrical automation after graduation, you have to understand what is most needed for the development of industry in the country now? What do technicians need the most? One of them is electricity-related, so it's not hard to find a job.

Secondly, I hope you can learn the professional courses of electrical automation, including digital analog electricity, single-chip microcomputer, motor drag, electrical control, automatic control principles (classic, modern), PLC, power system and so on. Of course, it is best if you can study deeply in school, it is best to be able to do more projects, in college, you can enter this major more into the microcontroller this aspect of learning, the microcontroller is easy to enter, and it is easy to do projects, of course, you have to have a good relationship with the teacher, I also came here like this. Doing more of this will show your hands-on, design skills.

Very helpful in finding a job.

Finally, the question of the way out after graduating from this major. After graduating from our class at that time, more than a dozen people entered the power system industry, such as: power bureau, power station, etc. (of course, most of them are related, and they are ready to study this major); There are also some people who do after-sales; There are also some people who do equipment maintenance; There are also a few people who do the single-chip microcomputer industry.

As far as I was concerned about the time when I was employed, the employment of female students was not as good as that of male students. Even if girls do better in school than boys, jobs are not as easy to find as boys, and this is determined by gender differences. After all, it is more convenient for boys than girls to deal with problems on the spot.

Zhejiang Bochuang Machinery **** urgently recruits people in this area. There is no limit to men and women, and there is no limit to master's degrees. The technical manager said that as long as the people who are diligent and willing to work hard, they can go to them. The company is really good, I went to the interview.

The girls around me have graduated and are rarely really engaged in the automation industry, including the work of female engineers, not that this electrical industry is difficult to learn, but the electrical industry needs to be able to adapt to business trips, can tolerate the on-site bad environment, can cope with sudden debugging situations, or is a test of people's ability I don't know if you plan to do programming automation technology or biased electrical technology, but no matter which part of the industry is very boring, and overtime is indispensable.

One of my classmates is majoring in this.

It's still easy to find a job after graduation.

Another friend is also a professional.

Later, I went to graduate school.

After graduation, I went to Sany Heavy Industry to do technology.

How to say it. It is not difficult to find a job for science majors.

And China is developing.

There is a need for science professionals.

Learn the professional knowledge of the school.

Will help in the future.

It is better to study in this major for graduate students.

The employment of electrical majors has always been very good, provided that the school is not too rubbish and the professional grades are not too bad.

Let's take a look at the job tendencies of electrical and electrical majors.

Main research directions:

1.Research on the basic theory of motor and high starting performance motor.

Technology. 3.A computerized monitoring system for the operation of the motor.

4.Synchronous generator excitation system and its control.

Career direction: Graduates are mainly engaged in the assembly, commissioning, testing and maintenance of general electronic equipment, as well as the procurement and sales of electronic products and components.

1. I don't know if you are studying industrial design in engineering or art, I am now in my senior year, and I am studying industrial design in engineering; But to be honest, both engineering and art have their own benefits, and they are very developed if they are studied well;

2. Employment situation: industrial design jobs are still quite easy to find, at present, there is also a shortage of industrial design talents in China, the employment rate of our class is basically 100%, and it is quite easy to find a job, but to be honest, there is also a big factor that we are 985 colleges, but I think you don't have to be discouraged, if you work hard in college, it is difficult to find a job in this major; When looking for a job, it does have a lot to do with your school (this is an unspoken rule), but it has little to do with whether your major is good in your school; If you want to find a particularly good job, it is recommended that you take the postgraduate examination in industrial design (but don't take the examination of your school, it is better to take the examination of a 985, 211 or other college, then the employment will be very popular; Because from the perspective of employment, there is not much difference between the graduate students of the two colleges and the undergraduates).

3 employment direction: our teacher strongly recommended us to do the work of automobile design, he has worked in many units, but also worked in Geely, BMW Brilliance, he said that industrial design of automobiles is the most promising, our classmates basically also go to the automobile unit, a few signed Geely, a few signed Chang'an, and signed the United States, the direction of work is basically divided into, modeling (hand-drawn), and modeling (3D modeling); Probably now there are basically industrial design needs that can be linked to industry;

4. Salary, development prospects: The salary of my classmates is basically more than 2000, five insurances and one housing fund (state-owned enterprise treatment), the treatment of private enterprises will be much higher, private enterprises will depend on personal ability, if the development is good, private enterprises 5000+, which is normal; Our teacher said that the industrial design in the south is more developed, and the city is of course the first choice of the big city, the more developed the place is the more important to industrial design, and there are many places to do foreign trade;

5 people feel that the university needs to focus on learning: I feel that this point is still very important, although you didn't ask, but I still share it with you, I hope you will avoid detours; When recruiting industrial design, the most important place is to have a portfolio (which is very different from other majors), you must participate in more design competitions during college, it is best to participate from the sophomore year, and the latest junior year should also participate, the company loves to win the design competition students who have won awards, even if they do not win, your ability has also improved a lot; Hand-drawn universities should insist on practice, many corporate job fairs require you to hand-draw, hand-drawn does not need to draw how fascinating, because industrial design is not a draftsman, but this is a basic skill, and the employment of people with poor hand-painting will be much worse; Software, PS to know (two-dimensional modification software, this is not taught in our school, I don't know your school situation, but you have to learn it well), 3D, solidworks, (3D software) these will definitely be used in future work; There are many more 2D software and 3D software, and you can choose to study according to your school's situation;

I know about this, and if there is anything that is not clear, you can ask me again;

At present, as far as China's design industry is concerned, industrial design belongs to the initial ranks, in China's industrial design development is not perfect enough, but it is more popular, although according to the survey, after graduation more than 70 graduates engaged in the work of industrial design is not touched, but the potential for development is still quite large.

Industrial design is product design. There are several general directions: such as car styling design, home appliance product design, and aircraft styling design. Research on the materials, performance, practicability, man-machine function, reuse, etc. of product manufacturing.

The major is to be proficient in various 3D software (such as: 3DMAX, Rhinoceros, etc.) and use them to create three-dimensional modeling of the product you design.

Supplement: At present, there are only five universities in China that have doctoral programs in industrial design: Northwestern Polytechnical University, Southeast University, Guangdong University of Technology, Southwest Jiaotong University, and Suzhou University.

This major should be engaged in some management work with a certain technical content, and it is a panacea industry, as for the direction, it should refer to the national guidelines and policies. For example, if the state advocates people's livelihood projects, you go to real estate and engage in low-carbon environmental protection, and you go to the corresponding industrial system. In short, in the future, on the basis of your major, you will also have to study, one is to engage in pure management, take the national civil service examination, and enter the first organ, and the other is to supplement your professional courses and engage in professional skills.

Admission to a professional research institute.

Industrial design jobs are still quite easy to find, at present, there is also a shortage of industrial design talents in China, the employment rate of our class is basically 100%, and it is quite easy to find a job, but to be honest, there is also a big factor that we are 985 colleges, but I think you don't have to be discouraged, if you work hard in college, it is difficult to find a job in this major; When looking for a job, it does have a lot to do with your school (this is an unspoken rule), but it has little to do with whether your major is good in your school; If you want to find a particularly good job, it is recommended that you take the postgraduate examination in industrial design (but don't take the examination of your school, it is better to take the examination of a 985, 211 or other college, then the employment will be very popular; Because from the perspective of employment, there is not much difference between the graduate students of the two colleges and the undergraduates).

Industrial design should be very employable, you can relax your thinking appropriately, don't blindly pursue what major to graduate and find a job, as long as there are prospects to try it

After graduation, you can go to the factory as an industrial designer, or you can change to packaging design, advertising design, etc., industrial design in the coastal south of the development is better, such as Guangzhou, the salary of 5000-6000 generally, the development prospects are very good

It's easy to find design in private enterprises, and after a few years, you can transfer to management, and you can only make money if you have a project, but you don't make money by designing, and you're tired.

Engaged in automotive styling design, including body and interior and exterior decoration.

That's going to have to be a good one.

The last time I went to a senior examiner class, the expert was a woman.

There is also a training at Mitsubishi Corporation, and there is also a female expert.

So see if you work hard enough.