Revit doesn t install what s going on

Here's a brief list of possible causes:

1. What should I do if Revit is not uninstalled before installing the software, resulting in the installation failure?

Answer: Method 1: Use the official software uninstaller uninstalltool software to uninstall the remaining uninstalled subroutines, and then install Revit.

Method 2: If the uninstalltool software cannot retrieve the relevant Revit sub-software on the computer, it is recommended to use the **ccleaner software, scan and clean the Revit residual registry, and use the housekeeper software to clean up the computer junk, and then try to reinstall Revit.

Method 3: If both of the above methods are solved, it is recommended to change the software installation version and try to install Revit 2016 or other versions.

Method 4: If it still doesn't work, it is recommended to reinstall the system or change the computer.

2. Whether the software version is consistent with the system version, for example, the software is 64-bit and the system is 32-bit, it cannot be installed successfully.

1. Click "Autodesk Revit 2016 English Win 64bit DLM 001 to start the official installation", and click "OK" to start the decompression.

2. Decompression.

3. Click "Install".

4. Check "I Accept" and click "Next".

5. Enter the serial number and click "Next".

6. If you don't turn on the network, there will be a request prompt for confirming the installation as shown in the figure below.

7. Select the installation path of the software, here the path can be selected by the user, but try to install it on the hard disk with excess space capacity.

8. Installing.

9. The installation is complete.

Hello dear. The solution is as follows: Those who have installed Autodesk software know that the installation package needs to be re-installed on the computer for a "secondary decompression" process. It is recommended to set the path to a different folder from the folder where you plan to install Revit, and the folder path should not be too long, and there should be no Chinese or special symbols in the path.

The path selected for subsequent Revit installation should not be too long, and there should be no Chinese or special symbols in the path. Hope my answer is helpful to you [than heart].

Summary. Dear, hello, I'm glad to answer for you: Revit license doesn't work or isn't installed correctly A, dear, hello It means that you need to reinstall 1, copy out the data, and prevent the system from repairing the failure to lose data, at present, I have only tried win7 flagship can be successful.

2. Open the 360 system first aid, my computer shows that there is a driver problem, and then click Repair 3, restart Revit after the repair is completed, and the activation page will appear. The above is the solution to the authorization error in the Revit installation. The license is a contract or agreement concluded between the technology exporter and the technology importer in the technology, and is a kind of certificate for the transfer of industrial property rights, also known as industrial property licenses.

The exporter transfers the right to use the new technology to the importer in the form of a contract, which is called a license. It can be divided into three types of licenses: patents, trademark use rights, and know-how.

Dear, hello, I'm glad to answer for you: Revit license doesn't work or isn't installed correctlyA, dear, hello It means that you need to reinstall 1, copy out the old data, and prevent the system from repairing the failure to lose data, at present, I have only tried win7 flagship can be successful. 2. Open the 360 system first aid, my computer shows that there is a driver problem, and then click Repair 3, restart Revit after the repair is completed, and the activation page will appear.

The above is the solution to the authorization error in the Revit installation. The license is a contract or agreement between the technology exporter and the technology importer in the technology, and it is a kind of certificate for the transfer of industrial property rights, also known as the industrial property license. The loser transfers the right to use the new technology to the importer in the form of a contract, which is called a license.

It can be divided into three types of licenses: patents, trademark use rights, and know-how.

Hello, open the start interface, all programs, select the autodesk folder, uninstall tool, this is the autodesk family of special uninstall software, select the installation software you want to uninstall, you can uninstall. The uninstallation is clean, and if you want to reinstall, there will be no duplicate installation error.

<> hope it can help you.

What should I do if the Revit installation fails? In order to avoid software unusability or errors after installation, Autodesk has built a series of third-party language packs, patches and other environment installers in the software installation package (the wall crack suggests that Autodesk optimizes to allow the majority of software users to install different versions of the software). Therefore, when we install Autodesk software, we install the environment program first by default.

1.The system has installed a higher version of the environment package than the built-in software;

2.The logged in system account does not have sufficient permissions to install system components;

3.The storage path of the software installation package contains Chinese characters.

I'm too lazy, so I'll just tell you about the solution to the first reason today.

Resolution. The system has a later version installed (Method 01).

Helps uninstall environment packages of higher versions, such as VC and NET. I won't repeat it here, if you don't understand, you can chat with me privately.

Restart the installer, the installation is successful, good luck, eat chicken tonight.

The system has a later version installed (Method 02).

Run the command line by modifying the installer, skip the installation of the environment package, and directly install Revit and other related programs.

1.Check the installation log file and repeat the above method 01 step 1, most commonly the software terminates the installer due to the failure of Microsoft Visual C++ installation.

2.Open the path of the software installation package, find a copy of the backup and put it to another folder (put it in **you are free, as long as you can find it later.) ), use Notepad to open the installation folder.

3.Look for the Run line where Microsoft Visual C++ is installed. Key combination Ctrl+F to find the keyword vc.

4.Remove the run command line related to Microsoft Visual C++.

Step 4 needs to be operated with caution, students with English proficiency in level 4 and below should pay more attention, in case you mistakenly delete the key ** line, please go to the previous backup folder immediately, and copy a backup of the setup to the installation file to replace the current file.

The cause of this problem is that the software is uninstalled in the wrong way and is uninstalled in the wrong way.

How to uninstall Revit properly

If you don't uninstall the software properly, you can use the registry cleaner tool to clean up your computer's registry a few more times, then restart your computer and reinstall Revit.

Summary. Dear Glad to answer for you: Revit Click to install the steps are as follows:

1. Double-click the installation file and select the empty directory to unzip it, release the folder size near open the runner, and start installing Revit2015. (You can choose the Chinese Simplified Chinese version or English version), and select "Install on this computer". 3. Then click "I Accept" and execute "Next".

5. Select the installation path Note: The directory must be all English characters! 6. Automatic installation, just wait patiently at this time!

Once the installation is complete, click "Done". The next step is activation. 7. Open the Revit2015 shortcut icon on the desktop, pop up the interface, and click "I agree".

Revit2018 installation point is not available.

I am glad to answer for you: Revit click to install the steps are as follows: 1. Double-click the installation file to select the vacant directory and unzip it, and open the running program after releasing the folder size to start installing Revit2015.

The table of contents must be all in English characters! 6. Automatic installation, just wait patiently at this time! Once the installation is complete, click "Done".

The next step is activation. 7. Open the Revit2015 shortcut icon on the desktop, pop up the interface, and click "I agree".

I can't install two words.

Then uninstall and reinstall to try.

I haven't installed it, how do I uninstall it?

Look at the picture I sent, it's just that the two words of installation are not lit.

Dear, you can check it on Zhihu.