How to install the system on an NTFS format disk

If you are under the clone version, you must first make sure that what you are under is usable. Then you go into DOS to copy a version of ghost to the hard disk, and then put the disc in, run ghost to find the scene file on the disc with ghost, and then you can press load.

Use a tool such as PartitionMagic to convert the D drive to FAT32 format and you can identify it.

Ghost recovery is under pure DOS, and DOS can only recognize FAT32

Alternatively, the next higher version of Ghost may recognize the NTFS format.

Big brother, DOS can't recognize the NTFS partition format below, only the FAT32 format. Use Partition Master to convert the partition format under the Windows interface (data will not be lost).

I think of a stupid way.

You first convert the CD to FAT format.

Then you should find a CD disk when you install it.

Then during the installation process - change the C disk to NT mode.

After installing the 2003, then use the magician to convert the D drive to NT mode.

It's a bit of a hassle.

Partitions in NTFS format are not recognized under DOS.

Let's install it with a disk.

Absolutely, NTFS is the mainstream disk format.

FAT32 has been phased out.

Who told you have to reinstall the system to have a grid? Will files be encrypted after reinstalling the system?

Tools Materials: Computer, Chinese cabbage installation software, USB flash drive.

1. First turn on the computer and click the "Chinese cabbage installation" icon.

2. Then after the U disk automatically reads the interface of the Chinese cabbage installation version, check the "NTFS" option.

3. After that, in the interface, click the "One-click to make a boot USB flash drive" button.

4. Then in the interface, click the "OK" button.

5. After that, in the interface, it will display "Writing Chinese cabbage-related data".

6. Finally, in the interface, it says "Make Boot USB Drive Completed", and click the "Yes" button.

Summary. How to Install NTFS File System Hard Disk? There are three ways to install the NTFS file system module

The first method is to recompile the kernel in its entirety and then select NTFS features in the kernel, but this approach is too cumbersome and is not recommended if it is only to include NTFS support; The second method is to get the ntfs file system module (you can go to the Internet**, or you can use the kernel part of the machine to compile and generate, you don't need to compile the kernel completely, it is much simpler and more convenient), and then use the modprobe command to install, this section will introduce this method; The third way is to install a third-party plug-in for the NTFS file system, such as NTFS-3G, which is simple to install and has complete functions, and we will also talk about this method; Once you have the ntfs file system module, install it manually.

There is also a file above that says it cannot be installed in fat 32.

How to Install NTFS File System Hard Disk? There are three ways to install the NTFS filesystem module: the first method is to recompile the kernel completely, and then select the NTFS function in the kernel, but this method is too cumbersome, and if it is only buried to add NTFS support, such a complex method is not recommended; The second method is to get the ntfs file system module (you can go to the Internet**, or you can use the kernel part of the machine to compile and generate, you don't need to compile the kernel completely, it is much simpler and more convenient), and then use the modprobe command to install, this section will introduce this method; The third method is to install a third-party plug-in for the NTFS file system, such as NTFS-3G, which is simple to install and has complete functions, and we will also talk about this method; Once you have the ntfs file system module, install it manually.

How to deal with it? If you use this method, you first need to get the ntfs filesystem module, which is usually extended with *ko. We can find it directly on the internet in the module file** after installation; You can also ** complete kernel source source bend spring, hail resistant to compile and generate the module by itself, and then install.

Also how to fix the file that says above cannot be installed on fat 32?

Also how to fix the file that says above cannot be installed on fat 32?

Solution: Convert it to NTFS format; Convert the old method: Run the input cmd and then type: convert c:

fs:ntfs Note: If you want to convert the D disk to NTFS format, c:fs:

NTFS C: Change it and you can slow down!

How do I start running?

Press the shortcut key "Windows+R" and press the shortcut key "Windows+R" to open the "Run" window.

Kiss, you are good, I am very happy to answer for you, kiss 1The first method is to recompile the kernel in its entirety and then select NTFS features in the kernel, but this approach is too cumbersome and is not recommended if it is only to include NTFS support; 2.The second method is to get the ntfs file system module (you can go to the Internet**, or you can use the kernel part of the machine to compile and generate, you don't need to compile the kernel completely, it is much simpler and more convenient), and then quietly use the modprobe command to install, this section will introduce this method; 3.

The third way is to install a third-party plug-in for the NTFS file system, such as NTFS-3G, which is easy to install and fully functional, and we will also talk about this method <> yourself

I hope my answers can help you and wish you a happy and healthy life!!

Hello dear! NTFS file system hard disk solution: Convert with conversion tool:

Here I will take "Aomei Partition Assistant Pro" as an example to talk about the method of using the conversion tool. Open the storage directory of "Aomei Partition Assistant", find "File", and double-click to start the program. Select the way you want to convert and then the next step.

Select the partition you want to convert and move on. Once determined, the software starts to convert the partitions. Wait for a while**The replacement time is related to the size of your disk), and the software prompts that the conversion is complete.

3Finally, open the computer to check the partition you just operated, and find that it has been converted to NTFS format! The NTFS file system is an advanced file system that provides performance, security, reliability, and advanced features that are not available in various FAT versions. What's more, NTFS can store individual files larger than 4G, and it also offers advanced features such as file and folder permissions, encryption, disk quotas, and compression.

Hello dear! The above is my answer to this question, if you think I am very satisfied, please follow me for a one-on-one consultation in the future, and then please do it a little manually, give me a thumbs up! Welcome to consult again!