How Do I Configure the Correct DNSPOD Domain Name Resolution?

The steps to correctly set up DNSPOD domain name resolution are as follows:

Log in to DNSPOD, enter the background management interface, and click [Add Domain Name];

Enter the domain name for which you want to set DNSPOD and click the OK button.

Click on the domain name to enter the domain name resolution setting interface;

After entering the management interface, the system will automatically scan whether to add the parsing record before, and wait patiently for the scan to complete.

Click the [Add Record] button to resolve the domain name;

The parsing settings are the same as those of other parsing management backgrounds, and the parsing settings will take effect within 10 minutes.

1. Go to DNSPOD, add a record, enter the domain name, and click OK.

2. After that, enter the next resolution management window of the domain name.

There are two record values to be recorded here:

The third step is required.

Click Add Record three times.

1. Fill in the host record in turn: *, www

2. Record type: CNAME (alias record) or optional A record.

Let's say that if the cname record is used, the next record value is in the form of a string of **; Using a record, the record value in the next step is a string of numbers, both can be, look at the server IP in the background of the space, generally use the CNAME record.

3. To fill in the record value, please log in to the control panel of the IP space to be parsed (that is, the background of the virtual host), query the server IP, and fill it in.

4. Other defaults, just don't move.

5. Click Save.

1. Log in to the domain name management background, select the domain name you want to resolve, and click Manage to enter the management interface.

2. Fill in the two values in the first step in the record value in turn, fill in @ and www in turn for the host record in front, and select the cname record as the record type. 3. Save.

By the time we got here, it was almost finished, but it didn't mean that it had been successful.

You need to wait for a while for the parsing to take effect!

Here DNSPOD officially says that it is a working day, in fact, it is not needed, generally about ten minutes. If there are no accidents or circumstances.

to register an account;

Next, log in to your Xinnet account, click [Domain Management] under [My Products], and click [Manage] to the right of the domain name you want to modify the DNS in [My Domain], and you will come to the domain name management page of Xinnet (Login to Xinnet's domain name management platform**Yes.

Click Domain Name Management, then click Modify DNS, select "Fill in specific information" in the name server, and fill in "Primary Nameserver Name" and "Secondary Nameserver Name" in the fields of "Primary Nameserver Name" and "Secondary Nameserver Name" respectively.

Go back there and click on the previously added domain (the newly added domain will scan the DNS record the first time you click on it), add the A record or the CNAME record or something else.

It takes up to 72 hours for the DNS server to be modified, so it will take some time for it to become operational.

Just change to the latter's DNS.

If you can change the domain name registrar, you can transfer it to our company management, and we can teach you.

The transfer fee for the English domain name is 55 yuan (including one-year renewal).

Step 1: Add a record to DNSPOD.

1. Access. **, in the upper right corner of the homepage of the DNSPOD official website, there is [Register], as shown in the figure below, click the [Register] button.

2. On the account registration page, enter your email address and password, read the DNSPOD Domain Name Resolution Service Agreement, and click [Agree to the following agreement and register].

If you need to register a business, please click [Register a business] on the right

3. Click Get Started Now

4. Click Add Domain Name

5. After adding the main domain name you want to resolve, click [OK].

6. Click on the domain name you just added.

7. On the domain name record management interface, click [Add Record] and add the record you need to parse.

8. After the record is added and the DNS of the domain name is modified correctly, an activation prompt will appear, and you can activate it according to the prompt.

Step 3: Be patient! Wait for it to take effect.

After following the first two steps, just be patient.

Note: It takes 0-72 hours for the DNS server to be modified globally, so please be patient if you find that there are some places where the record is not in effect and the DNS has been modified for less than 72 hours.

Well, the client sets up dynamic parsing, and when the local IP changes, the record value of the server will be automatically modified.

What do you mean by background parsing? The client is only a tool that automatically modifies the value of the domain name record, and the specific resolution needs to be resolved by the dnspod server.

The dynamic domain name takes effect for a short time, a minute or two.

The parsing time is about less than 1 minute, and it takes about 1 minute to check whether your IP has changed.

DDNS dynamic domain name service explanation, router setting dynamic domain name resolution own broadband IP tutorial.

You can add and change the record directly in the client. Dynamic domains are also instantaneous.

You can apply for a domain name directly online, and if you don't understand something, I can help you.

Yes, that's total.

The general domain name resolution is to resolve www@m and so on.

Domain name resolution is to point the domain name to the IP of the space, so that people can easily access a service through the registered domain name. IP address is the numerical address that identifies a site on the network, and in order to facilitate memory, a domain name is used instead of an IP address to identify the site address. DNS is the process of converting a domain name to an IP address.

The DNS server completes the resolution of the domain name.

Domain name resolution is also called domain name pointing, server settings, domain name configuration, reverse IP registration, and so on. To put it simply, the memorable domain name is resolved to IP, and the service is completed by the DNS server, which is to resolve the domain name to an IP address, and then bind a subdirectory to the domain name on the host of this IP address.

There are several types of domain name resolution:

1. A record analysis.

Record type selection"a";Enter the IP address of the host provided by the space provider. MX priority does not need to be set; TTL can be set to the default 3600.

2. Cname record parsing.

The method of resolving the cname type is basically the same as that of the A record type, in which the record type is changed to"cname", and fill in the server host address for the record value.

3. MX record parsing.

MX record parsing is used for mailbox parsing. Select MX for record type, select General for line type, or add three records with line types of Telecom, Netcom, and Education Network at the same time. The record value is filled in with the server IP address or alias address provided by the post office provider; TTL can be set to the default 3600, and the MX priority should be filled in the data required by the post office provider, or the default is 10, when there are multiple MX records, the priority should be set to different data.

The steps to correctly set up DNSPOD domain name resolution are as follows:

Log in to DNSPOD, enter the background management interface, and click [Add Domain Name];

Enter the domain name for which you want to set DNSPOD and click the OK button.

Click on the domain name to enter the domain name resolution setting interface;

After entering the management interface, the system will automatically scan whether to add the parsing record before, and wait patiently for the scan to complete.

Click the [Add Record] button to resolve the domain name;

The parsing settings are the same as those of other parsing management backgrounds, and the parsing settings will take effect within 10 minutes.

1. A record, the corresponding A record value, fill in your server IP, if you don't know, please consult your space provider.

2. The cname record is commonly referred to as alias resolution, and the cname value is filled in with the domain name provided to you by the space provider.

3. Note: Some service providers should add "." at the end of the cname record value"If the user doesn't add it, the system will automatically make up for it.

4. MX record, MX value fill in the IP address of your mail server or the domain name provided to you by the enterprise mailbox, if you don't know, please consult your mail service provider.

5. URL Hidden URL Non-hidden: Fill in the ** you want to jump to, 6, NS, this is not commonly used. ns downward authorization, fill in the dns domain name, 7, txt records, generally used for google, qq and other enterprise mailbox anti-spam settings.

8. AAAA records, which are not very commonly used. This is the address that resolves to IPv6.

If you want to resolve the domain name you apply for on the Internet, the domain name is the name, but where is the address stored in your web page, which requires the resolution of an IP address connected to your web, which is divided into two types of resolution: CNAME and A record.

Domain name resolution is to point the domain name to the **space IP, so that people can easily access ** a service through the registered domain name, and DNSPOD provides this service.

After the domain name is registered, it only means that you have the right to use the domain name, if you do not resolve the domain name, then the domain name can not play its role, the resolved domain name can be used as an email suffix, and can also be used as a **access to yourself**, so the necessary link for the domain name to be put into use is "domain name resolution".