Who should wear a helmet in the machine shop

Please refer to Article 37 of the Work Safety Law of the People's Republic of China.

Article 37 Production and business operation entities must provide employees with labor protection articles that meet national or industry standards, and supervise and educate employees to wear and use them in accordance with the rules of use.

JGJ59-99 Construction Safety Inspection Standard "Three Treasures" and "Four Mouths" Protection Inspection Score Sheet Article 1 has a person who does not wear a safety helmet deducted 5 points. This is an industry standard approved by the Ministry of Construction, although it is not said that "it is necessary", but "there is a person who does not wear a helmet will be deducted 5 points" is barely necessary.

Penalty Standards, Article 83, Item 7.

Article 83 If a production and business operation entity commits any of the following acts, it shall be ordered to make corrections within a time limit; where corrections are not made within the time limit, it is to be ordered to stop construction or suspend production and business for rectification, and may be concurrently fined up to 50,000 yuan; where serious consequences are caused and a crime is constituted, criminal responsibility is to be pursued in accordance with the relevant provisions of the Criminal Law

7) Failing to provide employees with labor protection articles that meet national or industry standards;

Please contact us if necessary.

Beijing Flying Man Science and Trade ****.

National designated manufacturer of special protective equipment, more than 20 years of professional helmet manufacturing experience, your trusted head safety protection expert. The main products are "Flyer" brand FRP safety helmets, ABS plastic safety helmets, etc., welcome to call 010-62473460 to learn more.

All of them must be worn, safety first.

Prevents hair from getting caught in the machine.

Summary. We are glad to answer your questions, you must wear a helmet when working in the following places: 1. Metallurgical high-temperature work sites, oilfield drilling and forest logging, power supply lines, high-rise building construction and construction scenes in cold areas.

2. Mining, machinery industry and other indoor normal temperature places with high impact strength. 3. Operations in coal mines, underground, tunnels, culverts and other places. Hope it helps.

We are glad to answer your questions, you must wear a helmet when working in the following places: 1. Metallurgical high-temperature work sites, oilfield drilling and forest logging, power supply lines, high-rise building construction and construction scenes in cold areas. 2. Mining, machinery industry and other indoor normal temperature places with high impact strength.

3. Operations in coal mines, underground, tunnels, culverts and other places. Hope it helps.

Pro, for you to expand: the choice of helmet color is relatively arbitrary, generally light or eye-catching colors are appropriate, such as white, light yellow, etc., can also be selected according to the requirements of relevant regulations, follow the principles of safety psychology, according to the department to choose, according to the workplace and environment to choose. Safety management personnel wear white helmets marked with green crosses, and maintenance personnel wear orange helmets.

At the forest harvesting site, red or orange hard hats are eye-catching and easy to spot. <>

This is to prevent injuries to the human head caused by falling objects and other specific factors.

The role of the helmet:

1. Cushioning and shock absorption.

There is a gap of 25 50mm between the cap shell and the cap lining, and when the object hits the helmet, the cap shell will not directly affect the top of the head due to force deformation.

2. Dispersing stress.

The cap shell is oval or hemispherical in shape with a smooth surface, and when an object falls on the cap shell, the object cannot stay and slides off immediately; Furthermore, the force to bear at the point where the cap shell received a blow transmits to the circumference. The force reduced by the cushioning of the cap lining can reach more than 2 3, and the rest of the force is transmitted to the skull of the person through the displacement area of the cap lining, so that the force point becomes the force surface, so as to avoid the impact force in a certain point of stress concentration on the cap shell, and reduce the force per unit area.

Summary. Hello dear. This is a violation. It is a violation of safety regulations. The unit can impose penalties according to the rules and regulations of the unit.

Hello dear. This is a violation. It is a violation of safety regulations. The unit can impose penalties according to the rules and regulations of the unit.

Is it legal to be fined.

Legal. The unit has the right to impose fines under the standards of the rules and regulations.

When entering the work site, you must wear labor protection equipment, otherwise it is a violation.

Safety helmets are a kind of labor protection products.

You can fine him for violating the rules, right?

Yes. However, the unit must have corresponding penalty provisions.

Is there any rule on how much to be fined?

If there are no regulations, then only education can be criticized. After improving the system, you can be punished according to the rules if you violate the rules again.

There are no specific rules for this. It can be determined according to the actual situation. For example, you can do it.

Hello, dear, the failure to wear a safety helmet in the Liangchao processing workshop is a violation of safety rules and regulations, and it is not responsible for the safety of one's own life. Violations of not wearing safety helmets on the job site: not wearing safety helmets in hot weather; Wear a hard hat without a strap; Luckily, he took off his helmet; Blows are everywhere, don't leave it to chance, it is possible that the moment you don't wear a hard hat, the accident happens!

Precautions for preventing illegal command (1) Correct the relationship between safety and production, when there are no safety production conditions, employees can refuse to accept production tasks. (2) Strengthen the cultivation of their own safety quality, improve the awareness of safety rubber code files, master the safety technical operation procedures, and be able to correctly deal with all kinds of problems encountered in the process of production and operation. (3) Criticize and correct the illegal command in a timely manner.

Summary. Hello, not wearing a helmet is a violation of safety production regulations, which may lead to work-related accidents and seriously endanger the life safety and health of workers.

Hello, not wearing a helmet is a violation of safety production regulations, which may lead to the occurrence of industrial accidents, seriously endanger the lives of workers, and seriously endanger the safety and health of workers.

Therefore, not wearing a helmet in the processing workshop is an irresponsible behavior, which violates the safety production regulations of the state and enterprises, and also violates professional ethics and professionalism. If someone is found not wearing a hard hat, they should be reminded and asked to wear it in time to ensure the safety and health of the workplace. At the same time, enterprises should strengthen safety education and training, improve the safety awareness and safety skills of employees, and ensure the integrity and stability of Anqiyou in the production process.

You always smile and are so close, it is an illegal operation. The construction banquet includes an important labor protection product in the safety management of the town: safety helmets, safety belts, and safety nets, referred to as the three guarantees. All construction personnel and management personnel must wear safety helmets when entering the construction site.

Hello dear, the positions that need to wear full hats in the workshop are as follows: police, flight attendants, construction workers, cooks, soldiers, steelmakers, security industry and commerce, taxation, urban management, inspection, security, miners, and train drivers. It is a special industry, and the packaging workshop should bring a hair band to prevent hair leakage.

Wear a mask in a standardized manner, wrap your nose and mouth all in it, kiss hello, I hope the answer can help you.