How is the drawing process of stainless steel honeycomb panel made?

Construction preparation, lofting, blanking, welding installation, grinding, weld inspection, polishing.

Before construction, the site should be lofted and the length of the various members should be accurately calculated.

According to the length of the protective net to accurately blanking, the allowable deviation of the cutting length of the component is 1mm.

Select the appropriate welding process, electrode diameter, welding current, welding speed, etc., and verify it through the welding process test.

Degreasing and decontamination treatment: check whether the groove and assembly clearance meet the requirements before welding, whether the positioning welding is firm, and there shall be no oil stain around the weld. Otherwise, trichloroethylene, benzene, gasoline, neutral detergent or other chemicals should be selected to be brushed with stainless steel wire fine brushes, and if necessary, an angle grinder can be used to grind out the metal surface before welding.

When welding, a thinner stainless steel electrode (welding wire) and a smaller welding current should be used. When welding, the welding joints between the components should be firm, the weld should be full, the welding wave on the metal surface of the weld should be uniform, and there should be no cracks, slag inclusions, welding nodules, burn-through, arc pits and needle-like pores and other defects, and there should be no spatter in the welding area.

After the rod is welded and assembled, the weld can be polished directly for welds that do not have obvious dents or bulge large beads. For welds with uneven slag or large beads, an angle grinder should be used for grinding, and then polished after grinding. After polishing, the appearance must be smooth and smooth, and there are no obvious welding marks.

Stainless steel honeycomb panel drawing generally has several effects::

Straight silk pattern, snow pattern, nylon pattern. The straight silk pattern is an uninterrupted pattern from top to bottom, and the workpiece of the fixed wire drawing machine can be moved back and forth. Snowflake pattern is now the most popular one, consisting of a little bit of regular dots, which can be achieved with insect sandpaper.

The nylon pattern is composed of lines of different lengths, and because the nylon wheel has a soft texture, it can grind uneven parts to achieve a nylon pattern.

Brushed stainless steel refers to: the surface of stainless steel is like a filamentous texture, which is just a processing process of stainless steel. The surface is matte, and if you look closely, there is a trace of texture on it, but you can't feel it. It is wear-resistant than the general glossy stainless steel, and it looks a little more classy.

The wire drawing process will lose the thickness of the stainless steel plate to a certain extent, generally. In addition, because the human body, especially the palm, has a relatively strong oil and sweat secretion, the stainless steel brushed plate is often touched by hand will leave more obvious fingerprints, which need to be scrubbed regularly.

At present, the brushed stainless steel is divided into: oil grinding and drawing, dry grinding and drawing, among which the oil grinding and drawing effect is the most ideal, and the appearance and other aspects are satisfactory!

The principle of making mirror stainless steel plate is that the raw material of stainless steel plate is polished on the steel plate surface with slurry through polishing equipment, so that the plate surface is flat and the luminosity is as clear as a mirror. Stainless steel mirror panel series products are widely used in architectural decoration, elevator decoration, industrial decoration, facility decoration and other decoration projects.

In summary, stainless steel wire drawing is a relatively common conventional plate on the market at present, that is, a straight line covers the entire stainless steel plate. Whereas, the 8k mirror panel has a glass mirror-like effect. Stainless steel wire drawing is the effect of sanding through the abrasive belt, which is relatively simple and fast.

The 8K mirror panel needs to go through more than 8 groups of machines, first coarse sand, and then eliminate a series of operations such as grinding head flowers to complete the mirror effect, relatively speaking, the mirror surface is much more complex, and the current market is different.