The stainless steel pot at home is blackened on the outside, is there any way to clean it?

Updated on home 2024-02-12
13 answers
  1. Anonymous users2024-02-06

    How to remove the blackened outside of the stainless steel pot:

    1. Place the ashes of the plants and trees.

    Sprinkle on the charred area and scrub with a damp rag. This is the earliest way of human cleaning, environmentally friendly and hygienic, but it is not suitable for households that now use natural gas.

    2. The mountains are red.

    Put it in a pot, add water and bring it to a boil to clean.

    3. Put the tomatoes in the pot and boil, and the black stains will fall off. However, this method is a bit wasteful of vegetables. But it's a good idea.

    4. Mix the liquor, beer and water into the pot, cover the pot, and wash it after 5 minutes.

    5. Put the apple peel or pineapple peel into the pot, add water and boil to clean.

    How to care for a stainless steel pot:

    1 Due to the thermal conductivity of stainless steel.

    Small, slow heat dissipation at the bottom, easy to concentrate the temperature, so the fire should not be too large when using stainless steel cookware, and the bottom heating surface should be as wide and uniform as possible, which can not only save fuel but also avoid scorching food at the bottom of the pot.

    2. If there is any food at the bottom of the pot that is bound and burned, it can be soaked in water and then gently scraped off with bamboo and wood chips, and not scraped with a kitchen knife or other sharp tool; After washing, use a soft cloth to dry and place in a dry place.

    3. Cooking utensils should avoid colliding with sharp and hard objects, so as not to cause scratches and scars, which will affect the appearance and sealing performance.

    4 After the cooking utensils are used for a period of time, a layer of mist will rise on the surface of the stainless steel, which will darken the surface of the cooking utensils. At this time, you can use a soft cloth to moisten the powder or dish soap.

    Wipe it to restore the light. This method can also be used if the outer surface is blackened by fumes.

    5 When using a stainless steel pot, do not let the bottom of the pot have water stains. Especially when used on briquette stoves, sulfur dioxide is produced when burned due to the sulfur contained in the briquettes.

    and sulfur trioxide, which produces sulphurous acid as soon as it encounters water.

    and sulfuric acid, which has a corrosive effect on the bottom of the pot.

  2. Anonymous users2024-02-05

    The appearance of the stainless steel pot is blackened, and you can use sandpaper to polish off the blackened part.

  3. Anonymous users2024-02-04

    1) Put the water in a larger pot and add the pineapple peel to cook in a smaller pot; (2) Or put in potato skin; (3) Wash the new pot you just bought with soapy water, and if it is dark after use, wash it with water.

  4. Anonymous users2024-02-03

    The dirt on the bottom of the stainless steel pot is difficult to clean, teach you a good way to wipe it clean.

  5. Anonymous users2024-02-02

    The stainless steel pot is instantly clean when it is burned black, life tips, and the method of turning the bottom of the stainless steel pot white.

  6. Anonymous users2024-02-01

    The stainless steel pot is blackened, and the housekeeping aunt teaches you a simple trick to wash it easily.

  7. Anonymous users2024-01-31

    Is the stainless steel pot yellow, black and difficult to clean? Teach you a trick, rub it with it, and the bottom of the pot is bright and smooth.

  8. Anonymous users2024-01-30

    <><What to do if the stainless steel pot burns black

    Although the stainless steel pot will not rust, it will inevitably burn in the process of cooking, therefore, many friends want to know what to do if the stainless steel pot burns black, let's take a look at what methods are there to deal with this problem!

    1. Brush the paste pot: soak it in hot water with laughter, it is easy to wash it, do not use a steel wool ball brush, it will break the pot, if it is an aluminum pot brushed, it is very bad for the body to cook rice after it is brushed. 2. If the bottom of the pot is pasted for rice and stir-frying, you can put a few mountain red in the pot, add a little cold water to boil (do not boil dry), and the bottom of the pot will be removed soon.

    3. Tomatoes to paste the bottom of the pot: If you cook a few tomatoes that are not very good in the pot, they will naturally fall.

    4. Remove the apple peel or pear peel from the bottom of the pot, add some water to the apple peel or pear peel, and then it will be easy to clean.

    5. Beer and liquor to paste the bottom of the pot: If you accidentally paste the pot when cooking, there is a pot at the bottom of the pot, if it is not easy to brush off, you can pour a little liquor and beer and a small amount of water (the ratio is 1:1: mix, it is easy to scrub clean after 5 minutes with a lid).

    6. Add a little vinegar to the pot, add water to the place where it has just been covered, heat the pot, and wash it off.

    7. Add water to the pot and boil, add a small amount of dish soap, cover the pot, let it sit for one night, and then scrub it to remove.

  9. Anonymous users2024-01-29

    Edible baking soda powder can be bought on Jingdong or Tmall, 8-10 yuan kg, ** not expensive, but very practical, very versatile, not only can remove stainless steel pots, stove oil stains, dirt, but also clean cabinet countertops and other kitchen utensils, mountain red can be used to paste the bottom of the pot. If the bottom of the pot is battered, you can put a few mountain red in the pot, add a little cold water to boil (do not boil dry), and the bottom of the pot will be removed soon. Peel or pear peel to paste the bottom of the pan and boil the apple peel or pear peel with a little water, and then it will be easy to clean.

    <> beer, liquor and water, mix it in a ratio of 2:2:1, then cover the pot and let it stand for five minutes, and then brush it off with a sponge after five minutes.

    Then we stir the well-mixed homemade detergent with a small spoon and slowly apply it to the black and yellow part of the stainless steel pot, and after the application is done, let the stainless steel pot stand for 10 minutes or about 30 minutes, the longer the cleaning effect, the better. As a result, after the chopsticks were taken out, the previous water stains in the stainless steel pot were gone, like new. So I used a big pot to cook a small pot, and the small pot was clean inside and out, and the effect was very good.

    It is recommended to use a steel wool ball and a little bit of detergent to brush, or you can use five cleaning powders to clean. If you use a polishing machine, you can also polish, stainless steel pots are not recommended for high-heat smelting, only iron pots are suitable for high-fire smelting! The quality of stainless steel appliances used in life is not up to the acid and corrosion prevention in industrial production, so do not hold acidic or alkaline food for a long time, let alone decoction of traditional Chinese medicine!

    After cleaning, remember to brush it with a steel wool ball every time you use it, so that it will not accumulate dirt and can be cleaned with some acidic and alkaline substances, such as lemon juice or white vinegar, etc., of course, there will be some special cleaning powders on the market for cleaning. I feel that the effect of orange peel should not be very good, so it is recommended to buy some cleaning powder to clean it. Peel the bottom of the orange pot and cut a few oranges and boil them in the pot, let them simmer overnight, and the next day the paste will turn up, and it will be easy to remove.

    7. Add a little vinegar, heat the water and boil it, and it will be washed off.

  10. Anonymous users2024-01-28

    If you want to clean it very well, you should buy a professional spray to spray on it, and then brush it gently, and then you can make this stainless steel brush very bright, and it looks particularly white and beautiful.

  11. Anonymous users2024-01-27

    1. Use incense ash (mosquito coil, sandalwood), first dip the bottom of the pot with a little water, then sprinkle the dry incense ash evenly on the bottom of the pot, and then rub it slowly with a steel wool ball, pay attention not to damage the bottom of the pot too hard, the effect is very good.

    2. Add a ratio of 1:2 vinegar to water, soak in hot water for ten minutes, pay attention to the water to cover the dirt at the bottom of the pot, and then wipe it with a cloth.

  12. Anonymous users2024-01-26

    You can go to a treasure to buy,**salt to clean,**salt,**salt,** is very acidic, if you want to clean, wear gloves and don't touch ** and body parts, really can't buy one.

  13. Anonymous users2024-01-25

    Summary. Here's how to remove the black marks of the stainless steel pan from being burned out:

    The first way: soak in hot water for about 10 minutes, and then wash it, you can clean it very quickly. However, be careful not to brush with steel wool balls to avoid damaging the bottom of the stainless steel pan.

    How do you remove the blackened layer on the outside of a stainless steel pan?

    The method of removing the black marks of the stainless steel pot is as follows: first: soak it in hot water for about ten minutes, and then clean it, and it can be cleaned very quickly. However, be careful not to brush with steel wool balls to avoid damaging the bottom of the stainless steel pan.

    The second way: put hawthorn or tomatoes in a blackened stainless steel pot and bring to a boil with water. In this way, the blackened part will automatically fall off and there is no need to brush it.

    However, it is important not to allow the water to boil dry. Of course, if you think that using fresh tomatoes will be wasteful, you can also choose stale ones, which will not affect the cleaning effect.

    The third type: Add water to a stainless steel pot with burnt paste and blackened, add pineapple peel or apple peel or pear peel, boil and let stand for 20 minutes. Wait for it to cool and then remove. At this point, the pot will be as clean as new.

    Fourth: Add a ratio of 1:2 vinegar to water, remember to cover the burnt and blackened part! Then bring the lid to a boil and steep overnight. The next day, remove with a spoon of tea.

    Fifth: Add beer, liquor and water in the proportion to the blackened stainless steel pot, cover the pot, soak for 5 minutes, and then clean.

    Sixth: Cook the pot over low heat, and sprinkle salt into the pot when it smokes. Shake gently for a minute, then wipe again to remove.

Related questions
9 answers2024-02-12

There are two methods, one is to use passivation paste, which is specially used to clean short stainless steel welds, which only need to be applied to the weld for 20 minutes and wiped off; The other is for more welds, first put the workpiece into the mixture of nitric acid and hydrofluoric acid to soak and clean for 15 minutes, take it out and rinse it with water, and then put it into nitric acid to passivate for 20 minutes, take it out and rinse it clean.

9 answers2024-02-12

The bottom of the pot is burnt and paste, the black paste is difficult to get down, and how to deal with the yellow place on the side, learn a little trick to get twice the result with half the effort.

8 answers2024-02-12

American Grade: ASTM304, 304 stainless steel is a grade of stainless steel produced in accordance with American ASTM standards. >>>More

9 answers2024-02-12

Stainless steel combined water tank is generally commonly used for argon arc welding, and galvanized is assembled with bolts; The stainless steel water tank is more expensive, and the galvanized water tank is cheaper; The stainless steel water tank can hold the drinking water tank, and the galvanized water tank can hold the water for life and fire fighting. --Tengjia answered. >>>More

15 answers2024-02-12

Here are some of the well-known brands recognized in the valve industry, which are widely recognized and have a high reputation. While rankings may vary depending on time and market conditions, the following brands are generally considered to be among the top brands in the valve industry: >>>More