W7 What function can be turned on to automatically connect to the network?

This has nothing to do with disabling, starting, etc. It can be achieved without any other operation,Of course, it is very likely to use 360 to scan the boot network card to k,It can be completely achieved with the following method,But there may be some delay,One more thing to say here,If the machine is not particularly slow,There is no need to use the boot startup item to sort out。

If you surf the Internet through ADSL's modem, after the broadband connection is established, whenever you turn on the computer, or disconnect the network, a connection window will generally pop up, and there is an option in that window, "Automatically connect for me", as if to say, put a checkmark, and it will automatically connect when you boot up, but there will be some delay.

If you use a router, you can set it directly in the router settings interface, and there is a same "automatic connection" option, just tick it.

Remove the checkmark in front of Broadband Connection - Properties - Options - "Prompt name, password, certificate, etc.".

Then OK. Then add the dial-up shortcut to the "Startup". (Start - All Programs - Start).

If you don't understand, ask me again. In fact, there have been many people who have had this problem.

The easiest solution is to buy a router, then go online through the router, and set the router to always connect, so that you can go directly to the Internet as soon as you turn on the computer. It can also be shared across multiple computers.

Tools required: computer, win7 system rolling calendar.

The specific steps are as follows:

1. Click [Control Panel] in [Xiansheng Start], and then click [View Network Status and Tasks] under [Network and Internet].

2. After entering the Network and Sharing Center interface, click [Set up a new connection or network].

3. Click [Connect to Internet] under Select a connection option.

4. In the next step, the way to connect to the network will be displayed, click [Broadband (PPPoE)(R)].

5. Enter the username and password given by the telecom operator. It is recommended to check [Remember this password] so that the next time you connect, you will not need to re-enter the password.

6. Click Next to connect to the network. After the new broadband connection is successfully created, a broadband connection will be displayed in [Change Adapter Settings].

In the first step of setting up ADSL broadband Internet access in Win7, select "Network and Sharing Center" in the Win7 control panel

In the second step of setting up ADSL broadband Internet access in Win7, select "Set up a new connection or network".

In the third step of setting up ADSL broadband Internet access in Win7, select "Connect to Internet".

In the fourth step of setting up ADSL broadband Internet access in Win7, select "Broadband (PPPoE)".

In the fifth step of setting up ADSL broadband Internet access in win7, enter the account and password provided by the broadband service provider.

After clicking on the last connection, win7 can be connected to the Internet.

Win7 to set up a broadband connection method:

1.Click "Start" to > All Programs --> Attachments --> Communication --> New Connection Wizard.

2.Click "New Connection Wizard" to open the "New Connection Wizard" window, click "Next", the default is to select "Connect to the Internet", and click "Next" directly.

3.Select "Manually set up my connection" and click the "Next" button.

4.Select "Connect with a broadband connection that requires a username and password" and click the "Next" button.

5.If you don't take a name, the system will default to this connection command as "broadband connection", it is recommended to click "Next" directly.

6.Enter the username and password given to your broadband connection by your network provider, then click "Next".

7.If you want to add a shortcut to the connection on the desktop, you need to tick the "囗" in front of "Create a connection icon on the desktop".

8.Then click "Done" and there is an extra broadband connection icon on the desktop. Double-click it to connect to the Internet.

Control Panel--- Click Network & Internet--- Click Network Sharing Center--- click New Connection Wizard and "Link to Internet" will appear --Click "Next"--Click Broadband PPPoe--- Next--- Fill in the broadband login account and password--- check the box to remember password--Connection name: Broadband connection (you can give the connection a name at will)--Done Create a shortcut: Click on the control panel --- click on Control PanelNetwork and InternetNetwork Connections -- Right-click on the broadband connection you just created--- select Create Shortcut--- you will be prompted to create the shortcut on your desktop --- confirm.

Start Menu - > Control Panel - > Network & Internet - > Network & Sharing Center - > Left Manage Wi-Fi.

Change the adapter settings.

Change advanced sharing settings.

In the middle, set up a new network link (set broadband dialing here), click only and it will pop up.

1. Link to the Internet, click to enter If you want to enter the broadband username and password, select still want to set up a new connection, you can enter.

2. Set up a new network, which basically meets your network link settings. At this point, you should be able to do it.

Hope it helps.

1、Network shortcut,If it is the new win7 system just installed,There is no fast way,Then the mouse desktop right button,Find the "personalization" setting,Come out of the following interface,2、Find the left sidebar"Change desktop icon"button,Mouse click,Tick the "network" item,Click OK,Then there is a shortcut icon on the desktop"Network。

5. Next, select the second "Broadband (PPPOE)(R)" in the middle

This is usually set up by the system, don't touch it.

How to set up a network connection in Win7.

How to set up the router when using it.

Open the control panel of win7, [win7 problem], select network and internet - network and sharing center, [win7 problem], see that there is a change adapter setting on the left, [win7 problem], I don't know if you are using a wireless router or a line, [win7 problem], right-click the local connection if it is wired, [win7 problem], right-click on the wireless network connection, [win7 problem], select properties, [win7 problem], IPv6 doesn't care, [win7 problem], you click on the IPv4 attribute and set all the options to automatically get IP and DNS address, [win7 problem], your route will automatically assign you an IP address. Click OK. ok

How to set up a router without using broadband Internet access.

Use the IPv4 address bar, [Win7 problem], and automatically obtain the IP and DNS settings. Then go to >> Control Panel All Control Panel Items Network & Sharing Center >> select "Set up a new connection or network" and a dialog box appears, [Win7 Questions], which has 5 options, [Win7 Questions], you choose the option that suits you best, [Win7 Issues], and then click "Next"; A dialog box appears, [Win7 Issues], with two options "Wireless" and "Broadband". Select "Broadband", [Win7 Problem], click "Connection" to appear a dialog box, [Win7 Problem], enter your account in the username**, [Win7 Problem], enter your password in the password field, [Win7 Problem], check the "Remember Password" column, [Win7 Problem], and then click "Connection".

1.Click on the network icon in the lower right corner of the taskbar, and then the window will appear in the right-click on a wireless network, and you can see the properties, indicating that you have connected to it, or can connect to it. This wireless wifi is within your search.

2.In the wireless network properties window that opens, we switch to the Connections tab.

3.In this case, a checkmark will be placed in front of the automatic connection of this network when it is within range. This way it will be automatically connected later.

Right click on the signal icon in the lower right corner - open the network and sharing center - "Manage wireless networks" on the left - right click a network connection - put "this network is automatically connected within the range", and set the wireless networks in both places as above according to the above settings!

I've been puzzled by this question for a long time, and that's how I got it.

First, open the Network and Sharing Center, open Manage Wireless Networks in the right menu, and delete all wireless network connection configurations.

Then open the route, turn on the SSID broadcast, open the network and sharing center after saving and restarting, and then change the network connection**Click to set up a new connection or network - manually connect to the wireless network, fill in the network name and security type, password, etc., especially turn on the automatic connection to start and the network is not broadcast to also connect, connect to the network after saving, I operate here to show OK, and then log out 2 times to see if the connection is stable, if it is stable, you can turn off the SSID broadcast in the route.

Maybe it's a little cumbersome.,I'm groping to solve it.,Anyway, it's like this.,It's connected normally.。 Hope it works for you.

Turn on the computer, look at the icon in the lower right corner, and the network icon in the red circle is the network icon.

Right-click on the icon and select "Open Network and Sharing Center" from the pop-up menu.

Click on "Manage Wireless Networks".

Shown here is a list of all the wireless networks that have been used, and here the redundant ones have been removed, so there is only one.

You can double-click the icon of the wireless network, or right-click on the icon of the wireless network you want to set and select the properties.

In the interface that opens, uncheck the box before "Automatically connect when this network is in range" and click OK.

If you look at the list again, it shows that it is manually connected.

In the lower right corner, there is a small icon with the computer, you click on it. Go to the Network and Sharing Center.

Right-click on the name of the auto-connected network, select Properties, click on the connection option above, and then remove the tick of "Auto-connect within range" to OK.

If you need to set the IP address on your computer, as long as you go to "Control Panel" - "Network is Sharing Center" - "Local Connection" - "Properties" - find the option with "IPv4", and set the corresponding IP address; (See image below).

IP settings. If your computer is connected through a router, as long as you plug in the network cable on your computer, you are fine; However, the IP address set in the above figure needs to be cleared, and it can be set to automatically obtain;

IP settings. If your computer is connected through a wireless network card, as long as you find the corresponding wifi, enter the corresponding password and save it, after the above settings are set, the next boot can be automatically connected normally;

The method of setting up the broadband automatic connection at startup in win7 is as follows:

1. Click on the start menu and select "Control Panel".

2. In the control panel interface, find and click "Management Tools", and in the management tools interface, find and double-click "Task Scheduler" in the right window.

3. Create a basic task in the operation pane on the right.

4. Enter an easy-to-remember name in the name field, such as "broadband connection".

5. In any trigger, select When a user logs in.

6. Select "Start Program".

7. In the Startup Program dialog box, enter the following content in the "Programs and Scripts" column, "rasdial broadband connection broadband account name password", separated by a space in the middle.

8. Confirm the input parameters of the program or script again, click Yes after confirming that they are correct, and then click Finish.

9. After creating a scheduled task, when the computer is started and the current account is logged in, the broadband connection program has been started.

Win7 set broadband automatic connection method:

1.Right-click the broadband connection icon in the adapter settings, select the [Options] tab, and uncheck the options such as prompt name, password, and certificate on the dialing options, and confirm.

2.Right-click the broadband connection icon again, create a shortcut, select to the desktop, go back to the desktop and copy the broadband connection shortcut icon to Start Menu - All Programs - Start, right-click [Start], select "Open All Users", and paste the shortcut into it.

3.In Internet Explorer, check if the connection method is selected as "Dial regardless of network connection", or if not, select this option.

Menu bar - Tools - Internet options - [Connection], select "Dial regardless of whether the network connection exists".

5.Then restart your computer.