-
Anonymous users2024-02-05Press Dell immediately after powering on when it sees the display
-
Anonymous users2024-02-04How to use:1Make a Virtual Boot Disk Highlights:
Enables users who do not have a floppy drive to boot the system from a virtual floppy drive. With the widespread popularity of flash memory, more and more computer users are no longer installing floppy drives. But what do you do when you want to boot the system from a floppy drive?
In fact, it is completely possible to use the virtual floppy drive software to virtualize a bootable system for the computer, so as to boot the system smoothly. Virtual Combat: The software is pure green software, which extracts the ** file into a directory, and runs it, you can enter the main interface of the program (as shown in Figure 7).
In the "Image File" of "Startup Settings", select the file in the unzip directory, and if you need to enter the NTFS file format system, you can select the file. You can enter your favorite prompt menu in the "Display Text", which defaults to "Boot from a virtual boot floppy disk". Other settings generally do not need to be changed, and finally click the "Apply" button to create a virtual boot floppy disk.
After restarting the computer, select "Boot from a virtual boot floppy" in the multi-boot menu that appears, and the system will start to create a virtual boot floppy disk and boot the computer. Since it is running on a hard disk, it is very fast. Very easy to use virtual floppy drive creation software In the use of 2K, XP, and 2K3, it is often necessary to operate in a pure DOS state, such as using ghost to restore images, delete Trojan programs, delete files that must be deleted and protected by the system, or want to reinstall the system from DOS, and you don't have a DOS boot floppy disk at hand, or even a floppy drive.
At this time, this software seems so cute and useful. You just need to decompress the compressed package to any directory (if the system disk is in ntfs format, unzip it, then run vfloppy, select the image file you just extracted in the window (, and then click Apply, restart, you can see the dual system selection. The reason why this software is cute is that the DOS that is launched in this way is the purest and can be run straight away, making it easy for you to install the system from the hard drive.
If you want to install XP from DOS, just install this, reboot, select the virtual floppy drive in dual system selection, and then enter A: in pure DOS mode, and then run: A:
format c: s, format c:, and then load, enter the winxp installation directory, such as run:
cd d: winxpproi38, finally enter the installation command winnt, ok! 0
-
Anonymous users2024-02-031. Set the disc to start;
2. Install the XP system from the CD;
3. Driver installation.
Specific steps: 1. Set up the disc to boot.
1. Start the computer and hold down the DEL key until the BIOS settings window appears.
2. Select and go to "BIOSSETUP", find the item or group that contains the boot text, and find the "first", "secend" and "third" items in order. They represent "First Boot", "Second Boot" and "Third Boot" respectively, and we can set them to "Optical Drive", "Floppy Drive" and "Hard Disk" in order.
3. After selecting the startup mode, press the F10 key, a dialog box appears, press Enter, and the computer will automatically restart.
2. Install the XP system from the CD;
1. Put in the XP installation disc before restarting, and press the enter key when you see the word CD appear at the bottom of the screen.
2. Until the monitor screen turns black, and then the protocol of the XP system appears, press the F8 key (on behalf of agreeing to this agreement), and then you can see the information list of all partitions of the hard disk, and there are Chinese operation instructions.
3. Select the C drive and press the DEL key to delete the partition. The location of the C drive becomes "Unpartitioned", and then press the C key at the original C drive location to create a partition, and the partition size does not need to be adjusted. The original C drive position has changed to the words "new unused", press the enter key to continue.
4. The formatting partition options page appears, it is recommended to select "Format partition with fat32", press the enter key to continue.
5. The XP installation interface appears.
3. Installation of the driver.
1. After restarting, take out the disc and let the computer boot from the hard disk to enter the XP settings window.
2. Press "Next", "Skip", and select "Do Not Register", "Finish".
3. Enter the desktop of the XP system.
4. Right-click on the desktop, select "Properties", select the "Display" tab, click the "Customize Desktop" item, check "My Computer", and select "OK" to exit.
5. Return to the desktop, right-click "My Computer", select "Properties", select the "Hardware" tab, select "Device Manager", which is the management window of all the hardware of the computer, and all the options with yellow question marks and exclamation marks in front of them represent the hardware that has not installed the driver, double-click to open its properties, select "Reinstall Driver", put in the corresponding driver CD, select "Automatic Installation", the system will automatically identify the corresponding driver and complete the installation.
-
Anonymous users2024-02-02Press the del button when the power is turned on. The boss sets the disc drive to be the first to start. ok
-
Anonymous users2024-02-01The picture upstairs is not the same as the landlord's, the landlord can't understand it, and I can't understand it
-
Anonymous users2024-01-311. Prepare an empty USB flash drive of more than 8G, and make a USB boot to clear the data of the USB flash drive, so we must pay attention to the data backup of the USB flash drive.
2. Find a computer that can access the Internet normally, and then we have the software to make the U disk PE, today we will show you the U disk master production, we first search on the Internet for the software to install it on the computer desktop.
The boot disk is completed.
3. Plug our U disk into the computer, directly open the software just now, and then give the computer a key to make U start, the default option we don't move, just make it, and when the production is completed, there will be a prompt on the page, at this time our U start is done.
4. **The system you want to install, it is recommended to choose a 64-bit operating system, choose Windows7 below the 6th generation processor, and choose Windows10 or more processors above the 6th generation**Windows10, and then store it in the USB flash drive we prepared.
So that the boot USB flash drive is ready.
-
Anonymous users2024-01-30Dear users, hello.
Provides you with a way to install your XP system.
Provide you with a way to install the win7 system.
Have a great day.
-
Anonymous users2024-01-29Boot press the del key to enter boot to find the first boot item to cd should be fine.
The system does not put the first drive letter and makes the files of the boot disk into a floppy disk. >>>More
It's good to restore the default value in the CMOS, if it doesn't work, you have to look at the English prompts, if the computer has been bought for more than 5 years, it is estimated that it is time to change the CMOS battery.
Of course, it is better to completely re-enact, and then the best solution is the problem of the virus. However, you need to back up your important files and drives. It is better to prepare for a long wait.
Based on the situation of the landlord, the computer does not start at all, you should rule out the software, display, sound, memory module problems, then the only possible problem is the failure of the hard disk; Problems with the power connection socket; The regulator is damaged. It is recommended to drag a repair person outside to check, they have all tools, and the door-to-door fee is roughly ranging from 20 to 50, you can bargain, I wish the landlord a computer as soon as possible.
Lead is harmful to the human body and can cause infertility and intellectual disability. Since 2003, the European Union has launched the RoHS environmental protection directive, which has strictly limited the content of harmful substances in electronic products exported to Europe (there are mainly six categories, lead is one of them, as well as chromium, cadmium, mercury, polybrominated biphenyls, etc., which are commonly used raw materials in electronic products in the past). Electronic products that exceed this content will be banned from import by local customs, and many other countries have followed up and put forward requirements in this regard, which has caused certain difficulties in the export of electronic products (the cost of lead-free raw materials** is much higher than that of lead, and the processing is also more difficult). Since 2008, countries such as Japan have issued stricter REACH directives to further regulate the requirements for hazardous substances. >>>More