What accessories are needed for integrated ceilings, and what are the accessories for integrated cei

Integrated ceiling installation tools: electric turning, hammer head, glass gun, scissors, ink fountain, level, tape measure, ceiling-specific suction cups, cutting machine, portable cutting machine.

Integrated ceiling auxiliary materials: screw bars, light steel keel, glass glue, transparent glue.

Lamp heating, air heating, lighting, ventilation, carbon fiber heating, LED lighting, spotlights, audio, air conditioners, ventilation holes (respiratory system), decorative modules and other accessories.

Sick ??Fade and submerge the female to lower the brain? Muxi? Flash? Invade? Tomb scarring? Heartfelt sauce cockroach dwelling in the banana banana? Is it sluggish and paralyzed? Paralyzed female neon roast larvae.

Integrated ceiling special cutter, ** on the on.

Hanging bars, keels, expansion screws, closing wires.

Keel with integrated ceiling fittings.

The importance of the keel for the integrated ceiling is self-evident, and the gusset appliances including bath bombs, heaters, exhaust fans, lights, etc. are supported by the keel. A good keel has the advantages of light weight, high strength, waterproof, shockproof, dustproof, sound insulation, sound absorption, constant temperature, etc., and also has the advantages of short construction period and simple construction, which is an indispensable new building material.

According to the different materials, the keel can be divided into wooden keel, light steel keel, aluminum alloy keel, steel keel, etc.; According to its model, specification and use, there are T-row, C-shaped, U-shaped keels and so on.

The keel can not be distinguished from the surface, you can break the keel by hand to see if it is hot-dip galvanized, the general poor quality of the knowledge sprayed with a layer of paint, if the paint is rusted very quickly, and even rust breaks, the ceiling is likely to sink. If you make a stroke of a coin, you can distinguish it by looking at whether there is a pattern on its surface.

Integrated edge trim for ceiling fittings.

The edge strip is cut according to the actual length, and the two ends are cut to about 45 degrees with a hacksaw, (because the wall is not necessarily an absolute 90 degrees, so it should be cut according to the actual angle, and the edge strip on one side can be cut to 45 degrees first, and the other side can be cut according to the actual angle by taking a piece of waste short edge strip, and then attached to the edge strip to be formally installed than drawing the actual angle, and then cutting), the cut edge strip is filed with a steel file to remove the burr; When the edge strip and the wall are fixed, the screw interval is 25-30cm, the upper mouth of the hem corner is aligned, and there can be no gap between the edge strip and the interface.

At present, the integrated ceiling is a more popular kind of ceiling, which has a good decorative effect and is very cost-effective. Let's introduce to you what are the integrated ceiling accessories.

1. Keel. The keel in the integrated ceiling is very important, and the keel is lightweight, waterproof, high-strength, sound insulation, sound absorption, etc., and the construction period is short, and the construction is simple. In addition, according to the different materials, the keel can be divided into wooden keel, light steel keel, steel keel, etc.; Depending on the model, specification and application, it can be divided into T-row, C-shaped, U-shaped keel, etc.

2. Trim strips.

The two ends of the edge strip can be cut to about 45 degrees with a hacksaw, the cut edge strip can be filed with a steel file to remove the burrs, the screw interval between the edge strip and the wall is fixed is 25-30cm, the upper mouth of the edge corner is aligned, the edge strip can not have a gap in the interface, and the edge strip is generally universal. For different brands, the edge strip must be different, but also according to the actual ceiling situation to choose to buy, generally with the gusset to buy.

Integrated ceiling style classification.

1. It refers to the disadvantages of natural leisure.

The integrated ceiling gives people a good sense of decoration, such as in the small garden, cultural stone decorative wall and rain flower stone and other decorations, which can give people a kind of closeness to nature and return to the basics has become one of the goals pursued by people.

2. Be bold and generous.

This style mainly uses cherry wood as the main material, and pursues a variety of design methods in design, while a series of more complete design concepts such as modernism and postmodernism are embodied in the interior design, which is more bold and generous.

3. Soft style.

This pastel style emphasizes the simplicity of the decorative form without losing the content, and slowly forms a style with black walnut as the main woodworking decorative panel. Minimalism and minimalism are also slowly starting to emerge as a style.

4. Elegant style.

The elegant style emphasizes the harmony of proportions and colors, with the upper part of a wall being the same color as the ceiling, while the walls are covered with a lightly textured potato wallpaper. This style is very elegant and tranquil, without a trace of impetuousness.

Summary: What are the relevant contents of the integrated ceiling accessories, which are the accessories that must be used when installing the integrated ceiling. If you want to know more about related knowledge, you can consult Qijia.com.

[Enter the area and get the decoration for free**].

Nowadays, more and more people will pay more attention to the choice of decoration materials, not only to choose good-looking materials, but also to take into account its overall style. The following will introduce to you what materials are needed for integrated ceilings. 1. Waterproof gypsum board waterproof gypsum board is afraid of the material, it is to add a quantitative waterproof agent to the gypsum core material, and the board core and face paper are waterproof treatment, so that they can reach a certain waterproof standard of light decoration board.

The surface of the waterproof gypsum board absorbs 160g m2, and the water absorption rate is about 5%. Waterproof gypsum board has the advantages of sound insulation, heat insulation, heat preservation, fire prevention, easy installation, good workability, and low cost. 2. Aluminum gusset aluminum gusset is a relatively new type of ceiling material at present, and this material has the advantages of fireproof, moisture-proof, anti-corrosion, antistatic, sound absorption, sound insulation, its commonly used shapes are elongated, square, etc., the surface has two kinds of plane and punching, the difference between the two is their hardness, microporous aluminum plate is also called dark bone square gusset ceiling system, its plate surface is smooth, the seam is fine, the design is simple and generous, the standard specifications of microporous aluminum plate are 350 * 350mm, 600 * 600mm, 600* gusset PVC gusset ceiling is made of polyvinyl chloride as raw material, extruded and assembled into a frame and then made of glass, you must know that this material is suitable for bathroom and kitchen ceiling decoration that does not have too high requirements for fire prevention.

PVC gusset ceiling has the advantages of moisture-proof, heat insulation, easy installation and cleaning, and low quality. During construction, the plastic gusset ceiling is composed of 40mm*40mm square wooden boards, and the plastic gusset is nailed under the skeleton. 4. Aluminum alloy gusset aluminum alloy ceiling is made by adding magnesium, manganese and other metals to the production process of aluminum gusset plate, so that the gusset is light and more elastic.

Compared with traditional ceiling materials, aluminum alloy gusset can be said to be better in terms of texture and decoration. It not only has the advantages of moisture-proof, fireproof, sound-absorbing and soundproof, but also has the effect of anti-static and dust-proof. However, the aluminum alloy ceiling will be relatively high, and most of them are mainly used for commercial purposes at present, and in recent years, there is a trend of gradual development to the household market.

Summary: What materials are needed for integrated ceilings, the above materials are very good, and these materials have different characteristics, you can determine according to your preferences.

Do the math how much it will cost you to renovate your home