-
1. Check whether the stripes are inside or outside the screen.
When we see streaks on the phone's screen, we first check whether these streaks are on the phone's outer or inner screen. If it is an external screen, we can wipe it repeatedly with a damp clean cloth until it is clean.
What to do if there are stripes on the screen after the phone is flooded.
2. Check whether there are still water droplets in the mobile phone screen.
If it is because the mobile phone fell into the water, causing the water to enter the screen, and it is not completely dry, we can use the mobile phone to dry the water in the mobile phone with a hair dryer, and then observe how the screen is conditioning, whether there are still streaks, and then progress to deal with it.
What to do if there are stripes on the screen after the phone is flooded.
Third, the stripes are not very obvious, which does not affect the use and aesthetics.
If our mobile phone is flooded, the screen has stripes, but the stripes are not obvious, which does not affect the normal use of the mobile phone, and at the same time does not affect the aesthetics of the mobile phone. If you give your phone to a mobile phone repair shop, there is no need to waste extra money.
What to do if there are stripes on the screen after the phone is flooded.
Fourth, take apart the mobile phone screen by yourself and wipe the stripes clean.
Use a screwdriver to disassemble the phone case on the phone, then take out the phone screen, clean the phone screen with clean water and dry it with a clean cloth, and finally install it.
What to do if there are stripes on the screen after the phone is flooded.
Fifth, the mobile phone display screen has stripes.
If it is the inner screen of the mobile phone, that is, the display screen, after we remove the mobile phone case, we can not clean the mobile phone display with clean water, which will cause damage to the mobile phone display, we can wipe the display with a clean and soft dry cloth, and then install it.
What to do if there are stripes on the screen after the phone is flooded.
6. Take the mobile phone to the repair shop to help the master deal with it.
If we are worried that we will not disassemble and are worried about disassembling the phone, we can take it to a repair shop or after-sales service center and let a professional master help us fold it and deal with the stripes in the screen.
What to do if there are stripes on the screen after the phone is flooded.
Seventh, the stripes are more serious and cannot be cleaned.
When we disassemble the phone case, clean it with water, wipe it with a clean cloth and can't remove the stripes and the stripes are obvious, we can buy a mobile phone screen of the same brand and model through online shopping and replace it, which can save unnecessary costs.
-
If the mobile phone accidentally gets into the water, you can try the following ways to deal with the mobile phone urgently to avoid secondary injury:
1. Please take the mobile phone to a dry and ventilated place as soon as possible, and use a dry paper towel or towel to blot the water stains on the surface of the mobile phone.
2. If the phone is turned on, press the power button to turn it off; If your phone is turned off, don't try to turn it on.
3. Please remove the SIM card and microSD card as soon as possible.
4. Please bring your mobile phone to the after-sales department of the mobile phone brand for testing and processing as soon as possible to avoid unnecessary losses.
2. Please do not bake with a hair dryer or stove after water ingress, so as to avoid liquid flowing into the inside of the mobile phone and damaging the mobile phone at high temperatures.
3. Some mobile phones can be turned on and used normally after simple treatment, but the mobile phone is composed of precision electronic components, and there is a hidden risk after water ingress, so it is recommended not to try to turn it on.
4. During the after-sales maintenance process, the data may be lost, it is recommended to ask the staff how to back up the data.
-
Try not to turn on the computer when water enters, the motherboard will be short-circuited
-
Summary. Hello, 1. If the screen is still on, the power must be turned off as soon as possible, and the battery should be deducted immediately if the battery can be detained, and the battery should be quickly removed. 2. If the mobile phone is automatically turned off, the screen is no longer lit, do not try to turn it on, once the power is on, the current may penetrate the motherboard, and the mobile phone will be mostly scrapped.
3. Shake it dry vigorously, but don't shake the machine off, the idea is to shake the water out of the screen. If there are water droplets left on the screen, there will be traces after drying. 4. Put it under a slight heat source such as a desk lamp and spotlight to let the moisture slowly dissipate.
This process takes more than six hours. 5. Many people like to use a hair dryer to blow, but in fact, the hair dryer is not very good, which can easily lead to water in places where there is no water intake. Do not use hot air to blow as it can damage the screen of the phone or even burn the internal parts of the phone.
Method 2: 1. Turn off the power as soon as possible. 2. If it falls into corrosive liquids (such as seawater and urine), immediately rinse the machine with anhydrous alcohol, if there is no alcohol, you can replace it with clean water, but be careful to prevent the situation from deteriorating further. 3. Disassemble the machine as soon as possible, but take your time when disassembling the machine.
4. Clean with alcohol or professional washing water. 5. Assemble the disassembled parts, if you can't assemble them, hand over the whole pile of things you disassemble to the maintenance point, and let the maintenance point clean up and assemble it for you again. Hope it helps.
Hello, 1. If the screen is still on, the power must be turned off as soon as possible, and the battery should be deducted immediately if the battery can be detained, and the battery should be quickly removed. 2. If the mobile phone is automatically turned off, the screen is no longer lit, do not try to turn it on, once the power is on, the current may penetrate the motherboard, and the mobile phone will be mostly scrapped. 3. Shake it dry vigorously, but don't shake the machine off, the idea is to shake the water out of the screen.
If there are water droplets left on the screen, there will be traces after drying. 4. Put it under a slight heat source such as a desk lamp and spotlight to let the moisture slowly dissipate. This process takes more than six hours.
5. Many people like to use a hair dryer to blow, but in fact, the hair dryer is not very good, which can easily lead to water in places where there is no water intake. Do not use hot air to blow as it can damage the screen of the phone or even burn the internal parts of the phone. Method 2: 1. Turn off the power as soon as possible.
2. If it falls into corrosive liquids (such as seawater and urine), immediately rinse the machine with anhydrous alcohol, if there is no alcohol, you can replace it with clean water, but be careful to prevent the situation from deteriorating further. 3. Disassemble the machine as soon as possible, but take your time when disassembling the machine. 4. Clean with alcohol or professional washing water.
5. Assemble the disassembled parts, if you can't assemble them, hand over the whole pile of things you disassemble to the maintenance point, and let the maintenance point clean up and assemble it for you again. Hope it helps.
It's been a few minutes.
I can charge it. Hello dear, please follow the above description.
-
Summary. Hello dear, glad to answer for you! If the charging hole is flooded, it is dangerous not to charge it immediately, you can try to wipe the charging port with a paper towel, and then use a hair dryer to aim at the mobile phone charging hole for 2-3 minutes.
Redmi note8pro can try the following operations if it can't be charged if it is flooded:1、After the Redmi mobile phone falls into the water,Plug in the charger and turn it on,It means that the internal motherboard and other parts of the mobile phone are not damaged,It may just be a fault caused by a short circuit in the battery,Generally, you can return to normal by replacing a battery of the same model。 2. If the battery is still not turned on normally, it may be that there is still residual water inside, it is recommended to contact Xiaomi's after-sales service to disassemble the mobile phone for testing, air dry the internal water vapor, and repair or replace the faulty circuit or parts.
Hello dear, glad to answer for you! If the charging hole is flooded, it is dangerous not to charge it immediately, you can try to wipe the charging port with a paper towel, and then use a hair dryer to aim at the mobile phone charging hole for 2-3 minutes. Redmi Note8Pro can not be charged if it is flooded, you can try the following operations:
1. After the Redmi mobile phone is quietly dropped into the water, the charger can be turned on, which means that the internal motherboard and other parts of the mobile phone are not damaged, and it may just be a fault caused by the battery entering the water and the slag road is short, and it can be restored to normal by replacing a battery of the same model. 2. If the battery is still not turned on normally, it may be that there is still residual water inside, it is recommended to contact Xiaomi's after-sales service to disassemble the mobile phone for testing, air dry the internal water vapor, and repair or replace the faulty circuit or parts.
Redmi (Redmi) is a technology brand owned by Xiaomi Group and aimed at young people. It aims to create high-quality, flagship experience, and smart hardware products for young people around the world. Adhere to the brand concept of "desperate love" and stand with young people around the world.
The predecessor of Redmi is a new product line launched by Xiaomi on July 31, 2013. At 10 o'clock in the morning on January 3, 2019, Xiaomi officially announced that it would upgrade the Redmi series to an independent sub-brand of Xiaomi's mobile phone business. On March 18, 2019, Lu Weibing, vice president of Xiaomi Group and general manager of Redmi Redmi brand, issued the "Redmi Brand Independence Declaration" pro, <>
The above is the answer I summarized for you, I am very happy to serve you, please give me a thumbs up, thank you very much for <>
I hope mine is helpful to you, and then I hope you are happy every day and have a good life<>
Good luck always comes with you, oh <>
It can be turned on. Can it be charged.
Yes, you have to dry it first, and there is no water.
How do you see if you do it or not.
You can pick it up and shake it to see if there is any water, and if you are not sure, you can use a hair dryer to blow it for 2 or 2 minutes
How long to blow with a hair dryer after your phone gets into water.
Shake off no water.
Blow for 2-5 minutes
If you run out of water, you can try to recharge it
Hello. Redmi phones support OTG and are compatible with most devices. Due to the wide variety of USB flash drives on the market, the specifications are different, and it is not guaranteed to be compatible with all devices. >>>More
Hi! Did you buy your phone in? If you buy it on the official website, it is recommended that you try a different charger. If the problem is still the same, you can consider sending it for repair. Ask the engineer to check it to see if there is a problem with the battery. >>>More
You are welcome to contact us at any time or visit Lenovo Lewen (for consultation.
There are no consequences, you can't brush at all.
Realme X2 can only be repaired through online consignment and is not worth buying. Redmi's configuration is relatively complete, but the after-sales service is worse than Honor. The price of about 1,400 yuan also has the nova5i pro in Pinduoduo's 10 billion subsidy activities, and the configuration is also higher.