If you want to find an automatic power on and off software, which hero recommends a good one? Thank

No software.

For example, if your computer wants to shut down at 22:00, you can select "Start Running" and enter "at 22:00 shutdown -s", so that at 22:00, the computer will appear in the "System Shutdown" dialog box, which has a 30-second countdown by default and prompts you to save the job.

Make. If you want to shut down in a countdown mode, you can enter "-s -t 3600", which means 60 here

It will automatically power off after minutes, and "3600" means 60 minutes.

After setting up the automatic shutdown, if you want to cancel it, you can enter "shutdown -a" in the runtime. Enter it additionally.

shutdown -i", you can open the Set Auto Shutdown dialog box and set the auto shutdown.

parameters, each with a specific purpose, and executing each one will produce a different effect, such as:

It can be used on demand.

f: Forcibly close the application.

m Computer Name: Controls the remote computer.

i: Displays the graphical user interface, but must be the first option for shutdown.

l: Log out of the current user.

r: Shut down and restart.

c "The content of the message": Enter the message content in the shutdown dialog box (no more than 127 characters).

Sometimes, we need to shut down the computer regularly, and here is a simple way to implement a scheduled shutdown under Windows XP.

Law. Specify that the system will automatically shut down after 22 minutes: click "Start Run", enter the command "shutdown" in "Open".

s t 1320" (note: quotation marks are not entered, there are spaces between parameters, and the unit of 1320 is seconds), click OK

button. Specify that the system will automatically shut down at a certain time (e.g. 12:00): Enter the command in "Open".

at 12:00 shutdown s".

To cancel the scheduled shutdown, enter the command shutdown a in the Open field.

There is no software for automatic startup.,There's a lot of software for shutdown.。。。

Or just make up an instruction.

shutdown -s -t **

Represents how long it takes to automatically shut down in seconds. Don't remove spaces.

point to start running, just enter the specified. If you want to cancel, enter shutdown -a.

Windows system settings, a Windows system timing to turn on and off, you can set a timer to shut down and turn on.

Auto-boot enters the BIOS settings, which needs to be supported by the motherboard! As for the shutdown method and software, there are more rounds! Just go down! Simple stove posture with bat-life hidden tree absolute order -s -t 3600

Automatic power on and off software, no need to install and directly unzip to use. Plug-in method, flexible use. Timing power on/off software Huituan supports automatic shutdown of the electric air blue segment brain.

The automatic power on and off software supports five timing methods:

1. Countdown method.

2. The date and time method of Douyu designation.

3. There is no operation mode of mouse and keyboard.

4. Boot time mode.

5. Cycle mode.

6. Execute regularly every day.

The solution to the automatic shutdown of the computer while it is running.

After automatic shutdown If it can be turned on normally, then this situation belongs to the self-protection function of the system.

Because there is an automatic power-off protection function in the motherboard BIOS settings, that is, when the computer is overloaded or encounters other situations that damage the CPU or system, this information will be fed back to the motherboard chip in time and react, because the BIOS is set up with this protection function, so in order to protect the CPU from damage, the system will automatically power off.

Your computer should be cleaned of dust or the fan is not running well, which usually occurs when the CPU is overheated or the CPU is overloaded due to the computer running for a long time. Excessive dust and improper fan operation will lead to poor heat dissipation and overheating of the CPU, which will trigger the automatic power-off protection function. If that's the case, just fix the heat dissipation problem!

1.Take out the battery of the motherboard, buckle it back, and discharge it. Purpose: To restore the default values of the BIOS settings and eliminate the automatic reboot or shutdown of the BIOS cooling presets.

2.Sweep the dust inside the chassis to eliminate short circuits or poor heat dissipation caused by excessive dust.

3.See if the CPU thermal grease is dry, silicone grease is used to improve heat dissipation capacity, if there is no silicone grease, the heat may not be dissipated, and the machine will automatically shut down. Note:

If there is too much thermal grease and it is too thick, it will form a film in the side bond in the contact surface, which will hinder the direct contact of the metal, which is worse than not applying thermal grease.

4.Think about it, is the fan size or fan power enough for a high-end computer? First consider the size of the fan (the bigger the better), then the power (the bigger the better), and the manufacturer.

5.Other objective reasons, such as high indoor temperature, running large programs (games) for a long time when booting up, poor heat dissipation of the case, poisoning, CPU usage often 100, etc. You can install Windows Optimizer, in addition to the software can comprehensively clean and optimize the system, it can also detect all hardware and software of the system, you can detect it at any time, and compare it with the previous information, and find problems from it.

If the computer cannot be turned on normally after power failure, it is estimated that there is a problem with the hardware or system files.

First, use the replacement method to troubleshoot the hardware problem (mainly check the motherboard and power supply).

After the hardware is eliminated, it is a system problem, and it can only be solved by reinstalling the system.

Frequent automatic power outages can cause harm to computer hardware, and the consequence is to shorten the life of the hardware.

After automatic shutdown.

If it can be turned on normally, then this situation is that the liquid belongs to the self-protection function of the system. If you can't, you'll have to fix it.

Mailbar is a small and useful free tool that integrates useful features such as scheduled shutdowns, screenshots, and quick hidden windows. The timer shutdown function supports standby and hibernation states, and you can set a fixed time shutdown and countdown shutdown. Its function settings are as follows:

1.You can set a specific time, such as 23:59:59 on March 15, 2012, to let the computer automatically perform tasks such as shutting down.

2.You can set a specific time every day, such as shutting down the computer at 23:00 every day.

3.It is possible to set a few hours and minutes later, the computer will automatically perform tasks such as shutting down, such as 1 hour and 30 minutes.

4.You can set the computer to automatically perform tasks such as shutdown after a few hours and minutes after turning on the computer, such as 2 hours and 30 minutes after turning on the computer.

5.You can add a 30-second countdown reminder to the above tasks.

6.You can also set the software to start automatically, and for some programs and tasks, you can set the scheduled tasks to be automatically executed at a certain time.