-
Anonymous users2024-02-06<> stainless steel, German DIN standard stainless steel. It is equivalent to 0cr18ni12mo2ti in China. SUS316TI in Japan
Austenitic stainless steel sheets are used in various industrial equipment, leaf springs, coil springs, sealing parts used in their interiors, exhaust manifolds for automobiles, catalytic converters, heat-resistant gaskets for EGR coolers and turbochargers, and joint parts for aircraft.
In particular, expensive materials containing Ni of 50 or more, such as NCF625 and NCF718, which are specified in JIS G 4902 (corrosion-resistant and heat-resistant superalloy sheets), are used in various industrial equipment and automobile exhaust gaskets that are used at high temperatures. On the other hand, JIS G 4312 (heat-resistant steel plates) is used for precipitated stainless steels such as SUH660, which uses intermetallic compounds such as Ti and Al, and the hardness of the precipitated stainless steel materials is greatly reduced when used at high temperatures for a long time, and can only be used up to about 500 °C, which does not meet the characteristics required by heat-resistant gaskets that have been promoted at high temperatures in recent years.
Material No.: Grade: X10CrNimoti1810
Standard: DIN 17400
Features & Applications:
<> stainless steel, German DIN standard stainless steel. The Chinese equivalent of stainless steel is austenitic stainless steel, and the stainless steel is added with TI to improve the resistance to intergranular corrosion. Stainless steel has strong resistance to intergranular corrosion, and is used in petrochemical, electromechanical hardware, ships, and power plants.
-
Anonymous users2024-02-05I can't find the relevant grade comparison table on the 316ti network, but I happen to have one from a company, send me a message and email you if you need it. Or look for ** here.
-
Anonymous users2024-02-04The German standard is not SS316 but 316Ti, X10CrNiMoti1810 (stainless steel is equivalent to the Chinese grade 0Cr18Ni12Mo2Ti
U.S. grade: 316Ti, material number:
Grade: X10CrNimoti1810
Standard: DIN 17400
Features & Applications:
X10CRNIMOTI1810 stainless steel, German DIN standard stainless steel. It is equivalent to 0cr18ni12mo2ti in China.
Chemical Composition: Carbon C:
Silicon SI:
Manganese mn:
Phosphorus p: sulfur s:
Chromium Cr:Molybdenum Mo:
Nickel ni:vanadium v:—
Titanium Ti: 5*%C
-
Anonymous users2024-02-03Numeric number:
Grade: X5CRN17-7
Standard: EN 10088 - 2:2005
Features & Applications:
X5CRNI17-7 rust steel, German DIN standard stainless steel.
Chemical Composition: Carbon C:
Silicon SI:
Manganese mn:
Phosphorus p: sulfur s:
Chromium Cr:Molybdenum Mo:
Nickel Ni: Nitrogen N:
-
Anonymous users2024-02-021: Grade 316Ti stainless steel.
Two: chemical composition.
c：≤ si≤ mn≤ p≤ s≤ ni crmo ti≥5*c%~
Three: the scope of application, the field of application:
316L stainless steel is added with MO, so its corrosion resistance, atmospheric corrosion resistance and high temperature strength are particularly good, and can be used under harsh conditions; Excellent work hardening (non-magnetic). Excellent strength at high temperatures. 316L stainless steel is an austenitic stainless steel and cannot be strengthened by heat treatment.
It has good strength, plasticity, toughness and cold formability, as well as good low-temperature properties. Due to the addition of 2% MO on the basis of Cr18Ni8, the steel is endowed with good resistance to reducing media and pitting resistance. It has suitable corrosion resistance in various organic acids, inorganic acids, alkalis, salts and seawater.
In reducing acidic media, its corrosion resistance is much better than that of 304
Four: Overview. The corrosion resistance of stainless steel is better than that of 304 stainless steel, and it has good corrosion resistance in the production process of pulp and paper. And 316 stainless steel is also resistant to the erosion of the ocean and the aggressive industrial atmosphere. In intermittent use below 1600 degrees and continuous use below 1700 degrees, 316 stainless steel has good oxidation resistance.
In the range of 800-1575 degrees, it is better not to act continuously on 316 stainless steel, but when 316 stainless steel is used continuously outside of this temperature range, the stainless steel has good heat resistance. 316L stainless steel has better resistance to carbide precipitation than 316 stainless steel, and can be used in the above temperature ranges. Annealing is carried out in the temperature range of 1850-2050 degrees, followed by rapid annealing, followed by rapid cooling.
It is resistant to high temperatures, easy to process, and high strength. 316L stainless steel, no post-weld annealing is required.
-
Anonymous users2024-02-01It is an austenitic stainless steel, which is 316 stainless steel with TI added to improve the resistance to intergranular corrosion and improve the stainless steel, which is used in equipment that resists sulfuric acid, phosphoric acid, acetic acid and acetic acid.
New national standard 06Cr17Ni12Mo2Ti, old national standard 0Cr18Ni12Mo3Ti, American standard S31635, 316Ti, Japanese standard SUS316Ti, European standard German standard X6CrNimoti17-12-2, chemical composition:
Sulfur s:
Phosphorus p:
Chromium Cr: Nickel Ni:
Titanium Ti: 5*%C
Molybdenum MO: Mechanical Properties:
Tensile strength b (mpa): 530
Conditional yield strength (mpa): 205
Elongation δ5 (%40
Section shrinkage 55
Hardness : 187HB; ≤90hrb;200HV Handling Specification and Metallographic Structure:
Heat treatment specifications: 1) solution 1000 1100 fast cooling; 2) According to the requirements of the buyer, the stabilization treatment can be carried out, and the heat treatment temperature is 850 930, but it must be specified in the contract.
Metallographic structure: The structure is characterized by austenite type.
The American Standard 316Ti is different from the 316.
-
Anonymous users2024-01-31Even just ... Come out and bottle soy sauce... Accidentally passing by... Berema!!
Adobe Premiere is the most widely used version of non-linear software. >>>More
Is it OK to wear tighter jeans? I have a friend who is about the same size as yours and I think she can wear it out, a black tee pattern on the upper body can be more colorful, or a slightly shorter group of clothes, a slightly tighter pair of light-colored jeans on the lower body, the trouser cuffs should be small, and then the trouser hems are rolled to the ankles 3-5cm so that people can't see your foot hair, shoes wear high-heeled sandals, light colors such as gray, white can be, you have to show your toes, and then apply red nail polish You can only apply it to the big nails or all of them, But don't paint the little nails, I personally don't think it's very good-looking. High-heeled sandals can make you look less chunky, small straight-leg light-colored jeans look cute, in recent years, it has become more popular to roll up the hem, which looks quite trendy, the dress will cover up your shoulder width, and the raglan design will not make people think that you are wide at the top and narrow at the bottom. >>>More
1200。。。It's still directly 58 city to close the second-hand bar.,You don't want a graphics card to play online games.。 >>>More
I've been using Big Foot, if the machine configuration is low and afraid of taking up memory, Big Foot can set some plug-ins to use if not, and you can turn off if you don't need it, so as to reduce the pressure on memory. >>>More
Business training objectives: This major cultivates senior engineering and technical talents who master the basic theories and basic knowledge of various civil engineering disciplines, and can engage in planning, design, construction, management and research in the fields of housing construction, underground construction (including mine construction), roads, tunnels, bridge construction, hydropower stations, port and offshore structures and facilities, water supply and drainage, and foundation treatment. Business training requirements: >>>More