The computer has to be completely deleted, and I want to move the above data to another computer

Go to the computer city to buy a jumper, similar to the network cable, but not the network cable, when you buy it and tell him to use the file to know, very cheap, after buying back plugged in the two computer network cable interfaces, go to the next flying pigeon on the Internet to pass the book, very small, open the flying pigeon on the two computers, you can use it, the fastest can reach 10m per second.

Laptop or desktop computer?

If it is a desktop computer, you can take out the hard disk and put it on another machine, and you can copy or cut it.

If it's a laptop, you can also find a laptop to connect it There is also a simple way to boot it into DOS, and copy it to the USB flash drive with the copy command, but what you want to copy depends on how big your USB flash drive is?

If you want to copy the entire hard drive, you can only take the hard drive out and install it on other machines

The desktop computer takes off the hard disk, connects it to another computer, and uses it to use ghost to test a hard disk under DOS.

The first choice is to confirm the connection of the hard disk, and the master disk and the slave disk must be distinguished.

Once you have turned on ghost, select"local"-"disk"-"to disk".Usually the main disk will be the first one, keep pressing"ok"That's it.

The easiest way is to put all the data on the computer in a folder, and then put it in a USB drive or portable hard disk, and that's it.

Find a hard drive enclosure and connect it to another machine and you can copy it.

Set up a master disk and a slave disk.

1. Connect the two computers with network cables and open "Network Discovery".

2. Turn on "Guests".

3. Change the local security policy "Access the computer from the network" and add the user "guest".

4. "Refuse to access the computer from the network" and delete the user "guest".

5. Share the files you want to transfer and add guests.

6. Click to open the network.

7. Double-click the shared computer and enter the account password to transfer the file.

Hard disk is one of the main storage media of a computer, consisting of one or more aluminum or glass discs.

Can you use your computer with a WOW customer service terminal? If you can, you have to find a 16G U disk to copy the entire folder over it.,And if you have another computer, if there is an F or other customer service end, then you have to change the name of the file.,Add an extra 1 or something to the back of the file to avoid conflicts.。 Now if you can't, you can remove the hard drive from the other computer.

For example, the E disk removes all the useful files, and then detaches the hard disk and uses ghost to test, and the partition under the disk is not the partition to the partition.

It's done in 3 minutes.

1.First of all, you need to prepare some necessary tools, including screwdrivers, handles, levers, handles, and handle holders, etc.

2.Then, you'll need to turn off the power, disconnect the power cord, and disconnect all external devices, including monitors, keyboards, mice, etc.

3.Next, you need to open the shell of the computer and disassemble the internal components of the computer, including the motherboard, CPU, memory, hard disk, etc.

4.Then, you need to unplug the computer's power and data cables from the motherboard and set them aside.

5.Next, you'll need to remove your computer's heatsink from the motherboard and set them aside.

6.Next, you'll need to take your computer's motherboard out of the chassis and set them aside.

7.Then, you'll need to remove your computer's case from your desktop and set them aside.

8.Finally, you need to put the computer's case in a safe place to make it so that it can be used later.

There are many ways to move files from one computer to another, but the three most common and easiest are the following:

Copy USB flash drives, portable hard disks, etc.

Use removable media such as USB flash drives, portable hard disks, etc., to copy them from one computer and paste them onto another.

Communication software transmission.

Use chat, email, and more to transfer files from one computer to another.

LAN sharing.

The prerequisite is that both computers are on the same LAN and are connected to the Internet. The steps are as follows:

1. Right-click on the desktop network --- properties --- change the advanced sharing settings 2.

Public network --- select the following options: Initiate network discovery--- Initiate file and printer sharing--- Enable sharing so that users with access to the network can read and write to files in public folders (optional) - Turn off password-protected sharing (

The other options use the default values).

3. Save and confirm.

4. Select the folder or drive letter that needs to be shared, right-click --Properties 5, open the Share tab ---

Select Share --- pop-up dialog box --- add "guest" -- share 6, select.

Advanced sharing. --Choose.

Sharing this file --- OK.

7. Double-click on another computer to open the network, and the folder or drive letter you just shared will appear.

Note: To prevent accidental errors, turn off the firewalls on both computers.

1. This problem should not be a file, but to install the Excel function of the macro state public software on the computer, see what version of your Excel is, if you want to use the same masking software, search for your current computer Excel version (wps several) from the Internet, let it be installed directly on your other computer. Or go to your original computer to find the root directory where you installed Excel, and copy all the files in the root directory to another computer to use, but this method is not recommended to use, it is too laborious. 2. If it is only an Excel format file, you can copy it directly.

I hope mine can help you and good luck!

U disk mobile hard disk copy and paste If there are millions of files in 1 each g, the copy is particularly slow, so press it in the copy first.

If it is a computer that is not in use, you can directly put the hard disk into another computer.

There are generally two ways to back up hard disk data and copy data between computers

1. Connect dual hard disks to one of the computers, and you can copy data to different partitions. (Of course, this method involves the problem of hard disk jumping, if it is only a temporary copy, you only need to connect the other hard disk to the data cable of the optical drive, and the optical drive is not connected first.) Then you can directly copy and paste the data into different partitions.

2. Copy through the network, you can establish a LAN between the two computers you want to copy data to each other, or the cooker directly connects the two computers through two network cards and a cross line, and sets the IP for data transfer.

Solution: Depending on your needs, you can see which method is more suitable for you or easier to operate.

There are many ways. 1. If two computers are in the same LAN, they can be directly transferred to another computer through the online neighbor.

2. You can use the U disk, first pass it into the U disk, and then plug the U disk into another computer to guide it.

3. You can use some chat tools such as QQ to transfer files between two accounts that are friends with each other.

5. Send an email with attachments.

Let's copy it with a large-capacity USB flash drive.