How to install the pipe at the bottom of the toilet squatting position

Installation of hot and cold water pipes:

1. The hot and cold water pipes in the bathroom should be separated and not too close to each other. The height of the shower water pipe is between.

2. For the installation of toilet water pipes, the general water pipes go to the top and do not go to the ground, the cold and hot water outlets must be horizontal, generally the left is hot and the right is cool, the pipeline needs to be laid horizontally and straightly, and the layout direction should be safe and reasonable. The position of the pipe clamp and the slope of the pipe should meet the requirements of the specification. All kinds of valves should be installed in the correct and flat position, which is easy to use and maintain.

3. The cold and hot water pipes are all into the wall, and the depth of the tank needs to be checked when slotting, and the cold and hot water pipes cannot be the same tank.

4. When installing the water heater inlet and outlet, the water inlet valve and the air inlet valve must be considered and installed in the corresponding position.

Precautions for water pipe installation:

1. There should be an indoor main valve for water inlet, and the water pipe and connecting accessories must be checked for damage, sand holes, cracks and other phenomena before installation.

2. When installing kitchen and bathroom pipelines, the size of the pipe on the wall should take into account the final size of the wall tiles after they are pasted, that is, the thickness of the wall tiles should be considered in advance.

3. In the wall and under the ground, use as little or no connection accessories as possible to reduce the hidden danger of leakage. The installation of connecting accessories should be firm and free of leakage.

4. When designing the water pipe, the installation position of the faucet of the washing machine and the layout of the sewer should be considered. At the same time, pay attention to whether the location of the power outlet is appropriate. When placing a drum washing machine in the kitchen cabinet, be sure to determine the size of the washing machine and kitchen cabinet, so as to leave a good position for loading and unloading water.

5. After the waterway transformation is completed, the pipeline pressure test should be done, and the experimental pressure should not be less. The duration is 20-30 minutes.

6. The left and right positions of the shower mixing valve are correct, and they are installed in the middle of the bathtub (determine the size of the bathtub first), the height is 150-200mm in the middle of the bathtub, and the jacuzzi is reserved for the outlet according to the model. The hole distance of the mixing valve is generally kept at 150 mm (concealed) and 100 mm (surface-mounted), and the location of the outlet should be determined according to the height of the room and the personal needs of the owner.

7. The water inlet and outlet of the toilet should be placed in a place where the view can be blocked by the toilet as much as possible. The location of the outlet should be determined according to the model, and it should generally be left 200 mm to the left of the middle of the toilet drain.

8. The height of the water supply reservation (elbow) on the wall should be appropriate, which should not only facilitate maintenance, but also expose the hose as little as possible, and do not add another hose, giving people a concise and beautiful vision. For sanitary ware such as column basins without cabinets below, the height of the reserved mouth should generally be set at about 500-600mm on the ground. The downwater outlet of the column basin should be set in the center of the bottom of the column or behind the column, and be covered by the column as much as possible.

The drain pipe of the wall-hung washbasin (no column, no cabinet) must be set up in a horizontal row with an elbow leading from the wall (that is, the sewer pipe enters the wall).

Size? bar. Anyway, remember the opening of the floor tiles.

When the squatting toilet is used, it is characterized by the human body taking the squatting type, and the squatting toilet is divided into uncovered and covered; The squatting toilet structure has a backflow bend and no backwater bend. The working principle of the trap is to use a horizontal"s"The bend creates a "water seal" to prevent the sewer odor from flowing backwards.

As per the normal installation, the hole installation of the bedpan sewer is at the back.

The toilet squatting potty is also known as the squatting toilet, which is composed of a flushometer and a bedpan, and the distance between the person and the wall should be considered when installing (the person is facing away from the wall).

Now there are forward and backward rushes on the market, there is no standard, and the pipes will be made after buying. Personally, I don't think there will be splashing water in the forward flush, but the flush tank should be slightly higher, the urinal should be larger, and the glaze in the urinal and urinal pipe should be better.

It must be the hole in the front, and the hole in the back is pretending to be reversed, so I'm embarrassed to admit it.

Enter the area and get the decoration for free**].

The role of the bathroom in home life is very large, each family will definitely plan the bathroom functional area, and the bathroom uses a lot of products, mainly sanitary ware, including washbasins, toilets, squatting toilets, shower pendants, etc., the installation of different products is different, and the pipe structure used in connection is also different, so what is the pipe structure of the squatting pit toilet? Let's take a look with Qeeka Home experts. 1. What is the pipe structure of the squatting pit toilet, the pipe structure of the squatting pit toilet is mainly divided into two types: there is a backwater bend and no backwater bend, among which the pipe structure with a water trap is more popular with household users, because the pipeline is a horizontal S shape, and the elbow can form a water seal, so that the design can avoid the sewer odor backflow, and the non-backflow bend is a straight pipe, which is less prone to blockage, and the two structures have their own advantages.

2. What materials are used for toilet pipes 1, UPVC pipesUPVC pipes are more common in toilet pipe materials, but the frost resistance and heat resistance of this pipe are relatively general, and it is only suitable for use in sewage pipes, because the chemical additive phthalein is added to the pipe, the purpose is to make the pipe softer, but it will have a certain impact on the internal organs of the human body, destroy the human body reengineering system, and is not suitable for use in the water inlet pipeline. 2. PE pipe PE pipe belongs to a new type of water pipe material, which is generally used for hot and cold water pipes in the bathroom, the material itself is non-toxic, and pressure-resistant and corrosion-resistant, so it is widely used, and can even be used in drinking water pipes. Summary:

The above is an introduction to the pipe structure of the squatting pit toilet, I hope the content shared can give you some reference, if you want to know more about relevant knowledge, you can **** Qijia.com to consult.

Do the math how much it will cost you to renovate your home

Summary. 1. When the squatting toilet is dredged, the spring can't get in, and the dredge master will open the hole. The diameter of the small hole is not large, just enough to put the dredging line into it to work.

With such a small hole, the dredging line does not need to be drilled from behind, and the dredging work can be carried out in the curved hole. However, this hole will affect the closure of the S-bend in the later stage, making the toilet smell very strong. So the location and size of this small hole have a lot to do with the master's choice when installing.

2. The manufacturer has two sewage outlets, one in the front and one in the back, which are commonly used in public toilets such as restaurants. This is because of the large number of passengers, the toilet blockage cannot be repaired in time, and the use cannot be delayed. Therefore, the master can only use violent methods and clean the toilet bowl with a stick.

But the downside of this squat toilet is that once something falls into the drain, it's unlikely to be retrieved.

How to have a mouth for squatting sewers.

The reason for the hole is that the above, please refer to 1. When the squatting toilet is dredged, the spring cannot enter, and the dredging master will open the hole. The diameter of the small hole is not large, just enough to put the dredging line into it to work.

With such a small hole, the dredging line Lib does not need to be drilled from behind, and the dredging work can be carried out in the curved hole. However, this hole will affect the closure of the S-bend in the later stage, making the toilet smell very strong. So the location and size of this small hole have a lot to do with the master's choice when installing.

2. The manufacturer has two sewage outlets when producing, one in the front and one in the back, which are commonly found in restaurants and other public health inspections. This is because of the large number of passengers, the toilet blockage cannot be repaired in time, and the use cannot be delayed. Therefore, the master can only use violent methods and clean the toilet bowl with a stick.

But the downside of this squat toilet is that once something falls into the drain, it's unlikely to be retrieved.

It's this kind of mouth. It's just above the sewer pipe, not over the squatting toilet.

Good. What the hell is going on, not yet.

<>1. First of all, it is necessary to measure the sewage outlet of the squatting feces to be installed, reserve the sewer pipe with the wall as the point extension, and determine the height difference between the sewer pipe entrance and the ground. 2. Measure the height of the squatting toilet to be installed, and reserve the installation pit on the ground, and the height of the pit should be greater than the height of the product to be installed. 3. The pit is filled with mixed mortar, and a layer of asphalt or butter is applied to the installation surface of the squatting toilet, the connecting rubber plug is inserted into the water inlet hole of the squatting toilet, and a layer of glass glue is evenly applied after the connection is tight, and the water inlet pipe is inserted to ensure that the seal is good.

4. The water outlet of the squatting toilet is evenly coated with a layer of glass glue, which is closely connected with the sewer pipe, and the toilet is adjusted to the level with filler. 5. Open the water inlet valve and test whether there is leakage. If there is any leakage, check the joints until there is no leakage.

6. After the inspection is completed, fill the toilet around it with filler, fix the toilet with cement mortar, and pave the tiles after drying.