How long does it take to stir the crystal mud, and how can the crystal mud become sticky

Put in plenty of water, it can be soaked within 24 hours, as long as there is water, it will not shrink back and shrink when it dries.

Crystal mud is a kind of epoch-making high-tech products, it is crystal clear, the color is dazzling, and everyone loves it. From now on, you don't need to use soil, peat, pine phosphorus, volcanic rock, vermiculite and all other naturally given substrates to grow flowers and plants. All you need to do is insert your favorite flowers and plants in a glass vase filled with crystal clay to place them in your home, office, hotel lobby, restaurant, etc.

How to use: 1 Rinse the soil from the roots of the plant before planting. If you cultivate it in water for about a week before planting to remove the old rotten roots, the plant will grow better.

2. Soak crystal soil in 1:80-100 times water for 12-24 hours; After swelling, drain the excess water and use.

3 Pour the expanded crystal clay into the clear glassware. When using it, it is best to allow the crystal soil to completely cover the plant roots.

4 If you need to mix multiple colors, please soak each color separately, drain the water and then mix in layers.

5 When soaking crystal clay, an appropriate amount of spices or perfume can be added, which can be used as an air freshener to help improve the indoor atmosphere.

Play a role in the interior.

Kiss! Hello, happy to answer your <>

How can the pro-crystal mud become sticky as follows: add crystal mud, you can have more, a small amount of white glue. The next thing is to add dish soap, instead of glycerin, and then a little shower gel, fragrant, bubble hand sanitizer directly squeeze some, toothpaste must be added, and the mud will become particularly soft.

1. Prepare the container, pour glue, add 3 to 5 times the amount of hot water, add a small amount of makeup remover, a round of glycerin, any pigment. 2. Stir well, add a small amount of molding water many times, and stir until it is formed. 3. When it cools down completely, you can play.

1. The main components of crystal mud: polyacrylate, raw materials: sodium alginate, sodium benzene potassium ate, water, anhydrous calcium chloride, pigment; 2. Crystal mud is a high-tech product of epoch-making significance, which is crystal clear and dazzling in color; 3. Odorless, clean and environmentally friendly, beautiful and durable; 4. It can be widely used in all kinds of indoor plant planting; 5. Strong water absorption, the weight can reach 40-80 times of its own weight after full water absorption.

Hope mine can help you <>

Do you have any other questions?

Ingredients: egg whites.

Dish soap, laundry detergent.

1. Pour the egg whites into a bowl as shown in the picture below.

2. Squeeze the dish soap into a bowl with egg whites, as shown in the picture below.

3. Stir the egg whites and dish soap well with a spoon, as shown in the picture below.

4. Add laundry detergent as shown in the figure below.

5. Use a spoon to stir again, and leave it at room temperature for a period of time after stirring, <>6. As shown in the figure below, the crystal mud without glue is ready.

Crystal clay that can be made without glue.

Put the crystal mud in the water and it will slowly grow larger. It doesn't take long to soak before it shrinks, the crystal mud shrinks as soon as it gets wet. If you want to drain the water to grow the flowers, this is not possible, the crystal mud will shrink without water, and the flowers will wither.

You can put the crystal mud you bought back in the cup or pot where you raise flowers, smooth it and put water as high as the crystal mud, and you're good to go. You can usually add a little water to it. Remember:

As soon as the crystal clay is not soaked in water, it will shrink back to its original appearance.

This is a recipe: take out a container, pour glue and water, the ratio is glue 1 to water, you can take a bottle cap to try the ratio, pour it in and stir.

Then take out a container, pour a little borax and water, the ratio is borax 1 to water 2, stir again, you can use warm water, so as to promote the melting of borax to speed up, use cold water to stir borax for a while, and then pour into the mixture of glue and borax, particles do not pour the mixture in!

Stir until your hands do not touch.

There is another way: method: 25ml glue and 25ml of warm water are mixed, 50ml of warm water is mixed with a little borax, and then the two solutions are mixed, and the excess water is considered to be obtained [don't put more borax, otherwise it will be particularly brittle, and not less, otherwise it will be unsuccessful, borax can be bought in pharmacies that sell traditional Chinese medicine, don't play with borax, it's toxic].

It is said that borax can be replaced with laundry detergent, but I have not tried it.

Homemade crystal mud depends on how much sodium alginate is put in, and 1 kg of water should be added for every 10 grams of sodium alginate.

Here are the steps to make crystal clay:

1. Put a certain amount of sodium alginate into a container, and flush into water with a water temperature of about 60 degrees (1 kg of water should be added for every 10 grams of sodium alginate), when adding water to brew and stir well, and then let it soak for 24 hours, sodium alginate will dissolve into a paste like a dilute form that can be used for later use.

2. Prepare another clean container and add a certain amount of water, then pour calcium chloride in proportion, stir it well and completely dissolve it in water, and then add a little pigment powder (liquid) according to the requirements of the required color, apply a color for each batch of processing, and mix different products together to form a colorful crystal clay.

3. After the above work is completed, prepare a plastic bucket with a small volume container, and drill a row of holes at the bottom of the barrel, with a diameter of about 8 mm, and then pour all the sodium alginate that has been dissolved into a paste into the small barrel, at this time, the sodium alginate liquid will drip down the rows of small holes at the bottom of the barrel, and the glue will all drip into the liquid water of calcium chloride that has been configured. When the glue is all dripping, let it soak in the calcium chloride liquid water, when after a few hours of soaking, the seaweed glue will solidify and dry by itself, forming a bright and transparent crystal beads, at this time can all be fished out of the calcium chloride solution, and placed in the tap water repeatedly rinsed and rubbed, in order to thoroughly rinse away the debris and chemical agent, and then put it into a plastic bag after drying out the water.

Prepare ingredients: 50 grams of laundry detergent, 150 grams of water, liquid glue 1, pour the laundry detergent and water into the prepared glass.

2. Add liquid glue to the glass, and you can add more liquid glue if you want to make more crystal clay.

3. Stir the mixed liquid up and down with a spoon, do not stir in circles.

4. After stirring, it will be made for one to two seconds, and the semi-finished crystal mud will be removed.

5. After taking it out, spread the crystal mud on the table, squeeze out the excess water, and wipe the squeezed water dry with toilet paper.

6. In this way, the crystal clay is ready, and you can knead it into your favorite shape at will.

Take glue, laundry detergent, glue a little more. After sticking together, stir it to form crystal puree.

1.Stir with laundry detergent and water until the grains are free.

2.Then stir with glue to shape.

3.Find a way to dry the water.

4.It's done.

You can try to dry it outside the window, or use a hair dryer, or you can add a little borax, which will be easier to shape.

How to make crystal clay:

1.First of all, put the sodium alginate into the utensil, and add about 50 warm water to soak, the ratio is about 1 kg of water per 10 grams of sodium alginate, after soaking for 24 hours, the sodium alginate in the basin will become a semi-thin paste and can be used.

2.Secondly, prepare another container to put an appropriate amount of water, and add a certain proportion of calcium chloride (a little antiseptic solution can be appropriately added in summer), after the calcium chloride is fully stirred and thoroughly dissolved, and then different colors of pigments are added as needed, and a color should be selected each time in order to form colorful crystal soil.

3。After the above work is completed, prepare a small container, it is best to use a small plastic bucket or washbasin, and drill a few rows of small holes with a diameter of about 5 mm at the bottom of the barrel, and then pour all the sodium alginate that has become a paste into the small barrel, at this time, the sodium alginate liquid will leak down the small hole at the bottom of the barrel, and the small beads that leak out from the bottom of the barrel will all drop into the container water of calcium chloride that has been placed, and when all the leakage is completed, let it soak in the liquid. After a period of soaking, the small particles will solidify and dry on their own, turning into granular crystal beads, at which time they can all be fished out of the calcium chloride liquid, and put in clean water to rinse repeatedly to thoroughly rinse out the miscellaneous and chemical agents.