How much does it cost to set up a small water plant?

First of all, the site, how large and large the plant, such as 2000 bottles of drinks or water per hour, the minimum plant requirement is 800 square meters, and there is really no 500 square meters.

1. Water treatment. Reverse osmosis is about 4-60,000.

2. Filling machine. If the demand is 1,000 pieces per day, and overtime production is possible, a rotary filling line of 1,000-1,500 bottles per hour is sufficient. Some of the whole set does not exceed 150,000.

3. Equipment materials and key components. In order to make the equipment durable, it must be made of 304 stainless steel, and pipes, valves, pumps, etc. need to be used well.

4. If it is PET bottled, the rear channel will be reversed and cooled.

5. One half-ton coal boiler, plus 20,000 yuan for installation and transformation.

6. The height of the plant is more than 4m, and the area is more than 700 square meters (one line).

7. Pure production equipment can be won at about 350,000 to 400,000 yuan, but now auxiliary facilities are more expensive, such as plant transformation, personnel disinfection facilities, cleaning workshops, laboratories, etc., and it is estimated that 300,000 yuan is required for comparative insurance.

8. In addition, the rent and reserve fund also need to be prepared at least 300,000 yuan.

9. Therefore, it takes at least 1 million yuan to open a beverage factory that can make stable quality and maintain survival.

10. It should be noted that once it is opened, it cannot be turned back, and investors in small beverage enterprises often only pay attention to equipment investment costs, ignoring the later expenses and time costs such as supporting facilities, auxiliary facilities, start-up costs, declaration QS, customized molds, packaging design, plate making, recruitment, training, and trial production. Formulate more than two sets of plans and emergency measures, and implement them carefully.

I hope my answers help you to invest carefully.

Small bottled water production lines do not have 1.3 million to 1.5 million. Can't take it down. Don't listen to the people who sell the equipment. It's not the same after placing a deposit.

About 200,000.

Set up a formal pure water plant that meets the national GB health requirements. The smallest scale requires an investment of about 200,000 yuan (excluding plant civil construction). Set up a self-employed water supply station (store) that produces and sells pure water.

It takes about 50,000 yuan to invest. Choose different city positioning, different scales, and different amounts of investment, and the specific is subject to the actual situation.

Breakdown of Pure Water Plant Costs:

1. Leasing plant costs;

If you want to open a pure water plant, entrepreneurs need to lease a storefront, which can have a factory of several hundred square meters or more. The lease fee of the factory will be more than 200,000 yuan. If you choose to be in a big city, the higher the investment.

2. The equipment cost of purchasing hardware;

If you operate a pure water plant, you need to buy a production line, and buy an old fiber wide production line for processing pure water, and the equipment cost will also account for a higher proportion, ranging from 100,000 yuan to 30,000 yuan. The specific equipment brand is different, and the size and specifications are different.

3. Decoration fee;

If you want to operate a pure water plant, you also need to simply decorate the plant, and some special equipment needs to be installed in the plant, and the decoration cost will be more than 30,000 yuan.

4. Advertising expenses;

If you do a good job of a brand, you can't do without publicity, advertising to promote the image of the brand, can also improve the popularity of the brand, and can also bring a certain consumer group. The advertising fee will be about 20,000 yuan.

5. Water and electricity bills, employee wages, etc.;

If you run a pure water plant, you need to have production workers, business salesmen, as well as management personnel, market specialists and other manpower input. The salary of the employee plus the operation of the plant, there is also a need to have the investment of water and electricity bills, and the water and electricity bills will occupy a higher proportion. Together, these costs add up to more than $50,000.

6. Liquidity.

The normal operation of the pure water plant also needs to have some working capital to spare, and the working capital needs to be about 40,000 yuan, which can be used daily for daily stocking and purchasing various consumables. <>

Summary. A pure water plant costs about 50,000 yuan.

1 set of pure water production host equipment, 16,000 yuan; Filling machine 16000 yuan.

Buckets are calculated according to 500, each is about 20 yuan, 10,000 yuan; In the form of small workshops, then there are no expenses such as rent.

How much does it cost to build a water purification plant?

A pure water plant costs about 50,000 yuan. 1 set of pure water production host equipment, 16,000 yuan; Filling machine 16000 yuan. Buckets are calculated according to 500, each is about 20 yuan, 10,000 yuan; In the form of small workshops, then there are no expenses such as rent.

Now the water treatment industry is developing very well, and the equipment is automated, which saves a lot of manpower and time. Take the 1t h production host as an example: the RO reverse osmosis process 1t h two-stage host (5 gallons of bottled water 52 barrels h), working 10 hours a day, about more than 500 barrels of output.

In summary, it takes 50,000 yuan to build a pure water plant with equipment costs and bucket fees.

It takes about 5 to 100,000 yuan to set up a water plant.

The process of handling the water plant.

The first step is to choose a water source.

A good water source can bring great benefits to the water plant, the treatment methods are similar all over the world, in order to get high-quality products, there must be a good water source! The vast majority of water plants in China are pure water, and a very small number are mineral water. The so-called mineral water is not artificially made, but the water source is rich in eight trace elements required by the state, and at least one of them meets the national standard, so that it can be made into mineral water.

In general, we recommend digging wells instead of running water. It's not that the tap water is bad, it's that in the long run, it's not cost-effective. There must be no pollution sources near water sources, and there can be no chemical plants.

The second is only a pure step, build a factory.

Now it is very convenient to build a factory, and the color steel plate can be built. The water plant should be built close to the water source so that it is easy to get water. The factory can be built by itself or rented. The floor of the factory can be paved with tiles or made of epoxy flooring.

The third step is to connect the electricity.

The water plant is a production-oriented enterprise, and the electricity consumption is 380V, so civil electricity is not allowed. It needs to be connected to the industrial pure code power to the plant, so that it can be used normally.

The first three steps are preparations, and only after they are done do they have the basic conditions for making a water plant. Once you have prepared the above, you can look for a manufacturer of equipment and machines, such as me (thank you). After asking, it is recommended to visit the factory so that its production capacity can be determined.

After inspecting the equipment, the contract is signed, and the manufacturer produces the equipment according to the customer's requirements. During this time, customers need to go through the business license and buy buckets, bucket lids and other items.

After the equipment enters the plant, the installer of the manufacturer places and debugs the equipment according to the layout of the plant. During this period, customers must study carefully, after all, the equipment is your own, you don't want to learn to operate and maintain, and you want others to come for you? After the equipment is debugged, it can be produced normally, so go to the Food and Drug Administration to apply for a production license.

After the production license is down, it can be produced and sold normally. <>