-
As follows:
1. Three-way catalytic conversion failure caused by overheating damage caused by lack of fire or over-dilute mixture.
2. Catalytic conversion failure due to excessive oil consumption and poisoning caused by fuel pollution.
Replace Jaguar. The original three-way catalytic converter of the vehicle.
That's it, remember not to change the auxiliary factory, the auxiliary factory will not be long before the lights will be turned on or install the TDTAS fault lamp to solve the dock, that is, the shielded joint, which is used to repair the P0420 fault lamp.
Introduce. Jaguar, a well-known British luxury car brand, was born in 1922 and was founded by Sir William Lyons; It is now part of the Tata Group of India.
Its. Entering China in 2004, Jaguar has three major products in the Chinese market: X series luxury sports sedan, Type series luxury sports car, and PACE series luxury coupe SUV.
In 2004, Jaguar officially entered the Chinese market. In 2015, Jaguar released its first SUV model, the XEL, a luxury sports sedan. In 2018, Jaguar's first luxury electric coupe, the Suvi-Pace, was launched at the Beijing Motor Show.
-
There are two ways to quickly resolve the P0420 fault.
The first is: replace the original three-way catalytic converter of Jaguar vehicles, remember not to change the auxiliary factory, the auxiliary factory will not take long to turn on the light or install the TDTAS fault lamp solution dock, that is, the shield joint, used to repair the P0420 fault lamp.
Hope it helps.
-
The P0420 is a three-way catalytic converter for exhaust pipes.
The meaning of failure.
There are 3 ways to quickly resolve the P0420 fault.
The first is: go to 4S to replace the original three-way catalytic converter of the vehicle, remember not to change the auxiliary factory, the auxiliary factory will not be long before the lights will be on.
The second is to install a part similar to the TDTAS fault lamp solution dock, which is used to repair the data and accompany the lifting of the P0420 fault lamp.
The third way is: use the car computer to enter the engine ECU background, and turn off this P0420 fault (some stupid cars can, some cars cannot).
Of course, there are many other ways to solve it, if you solve it quickly, I recommend these 3, I hope to help you.
-
Summary. Hello dear. The workaround for fault code P0420 catalyst system efficiency below threshold is:
1. Use gasoline from regular gas stations; 2. Go to the nearby 4S store to check and replace the three-way catalytic converter, remember not to change the auxiliary factory, it will light up immediately; 3. Go to a nearby 4S store to check and replace the oxygen sensor; 4. Install a TDTAS fault lamp solution dock similar to this type of parts for repairing data and removing P0420 fault lamp; 5. Use the on-board computer to enter the engine ECU background and turn off this P0420 fault.
Fault code P0420 catalyst system efficiency is lower than the threshold, how to solve it?
Hello dear. The solution to the fault code P0420 catalyst system efficiency below the threshold is as follows: 1. Use gasoline from regular gas stations; 2. Go to the nearby 4S store to check and replace the three-way catalytic converter, remember to change the auxiliary factory without seepage, and it will be lit up immediately; 3. Go to a nearby 4S store to check and replace the oxygen sensor; 4. Install the TDTAS fault lamp solution dock similar to this kind of parts chain for repairing data and removing P0420 fault lamp; 5. Use the on-board computer to enter the engine ECU background and turn off this P0420 fault.
Shed shouting base. Mine is the van liberation j6p420
Pro, the solution to the cooling of the j6p420 code force is solved: there are two main reasons: 1
The water tank is damaged, and the self-changing oil is cooled by the water tank. If the cooling pipe inside is damaged, it will flow into the tank. 2.
It may be that the oil seat and the water channel have been opened, because the oil filter seat of this car has a water channel to cool down. If it rusts with Kailu, the oil Sun Weilu will be under high pressure and it is unlikely that the cylinder head head will be flushed. 3. The radiator is damaged, and the antifreeze leakage caused by the poor sealing of the upper and lower water chambersThe antifreeze leakage is caused by the loose connection and poor sealing of the overflow tank, water pump and cooling system pipelines.
Fault code P0420 catalyst system efficiency is lower than the threshold, how to solve it?
Fault code P0420 catalyst system efficiency is lower than the threshold, how to solve it? This is a fault of the van liberation J6P420**.
Pro, there are 3 ways to quickly solve the P0420 failure: the first is: go to 4S to replace the original three-way catalytic converter of the vehicle, remember not to change the auxiliary factory, the auxiliary factory will not take long to turn on the second is:
The third way to install the TDTAS fault lamp solution dock is to repair the P0420 fault lamp with the car computer to enter the Jiansun engine ECU background and turn off the P0420 fault (some cars can, some cars can't). Hansen.
-
P0420 means that the three-way catalytic converter of the exhaust pipe is faulty and damaged.
There are 3 ways to quickly resolve the P0420 fault.
The first is: replace the original three-way catalytic converter of the vehicle, remember not to change the auxiliary factory, the auxiliary factory will not be long before the old will turn on the lights.
The second is to install a tdtas fault lamp solution dock similar to this kind of parts, which are used to repair the filial piety data to remove the p0420 so qing lack of obstacle lights.
The third way is: use the car computer to enter the engine ECU background and turn off this P0420 fault (some cars can, some cars can't).
Of course, there are many other ways to solve it, if you want to solve it quickly, I recommend these 3, I hope it can help you.
-
To solve this problem, we first need to understand the meaning of the P0420 (Accelerator Roller System Efficiency Below Lower Limit B1) is that the ECU monitors its efficiency with sensors installed in front and behind the three-state bridge element catalytic mode closure residual (TWC).
-
The fault code of the P0420 catalyst is low in the efficiency of the air filial piety system: the installation of the fault lamp solution dock, that is, the shield joint, is used to relieve the P0420 fault lamp.
Hope it helps.
-
The catalytic converter is restored first, and if it doesn't work again, it needs to be replaced.
-
In general, the catalytic efficiency of the three-way catalysis is too low, and the three-way catalytic converter can be replaced to solve the problem.
-
Summary. Hello, there are 3 ways to quickly fix the P0420 fault.
The first is: replace the original three-way catalytic converter of the vehicle, remember not to change the auxiliary factory, the auxiliary factory will not be long before the lights will be on.
The second is to install a part like this part of the TDTAS faulty lamp to repair the data to remove the P0420 faulty lamp.
The third way is: use the car computer to enter the engine ECU background and turn off this P0420 fault (some cars can, some cars can't).
Fault code P0420 The efficiency of the catalyst system is lower than the threshold, and how to solve it.
Hello, there are 3 ways to quickly solve the P0420 fault The first is: replace the original three-way catalytic converter of the vehicle, remember not to change the state chain of the auxiliary factory, the auxiliary factory will not take long to turn on the light The second way is: install the tdtas fault lamp book to stop Sun Heng Li Xie dock similar to this kind of parts, used to repair the data to remove the P0420 fault lamp The third one is:
Use the car computer to enter the engine ECU background and turn off this P0420 fault (some cars can, some cars can't).
The SCR system emits more than 7
Look directly at your three-way catalysis.
-
To solve this problem, we first need to understand the meaning of P0420 (catalyst system efficiency below the lower limit B1) is that the ECU monitors its efficiency with sensors installed in front of and behind the three-way catalytic converter (TWC).
Catalyst: According to the 1981 definition of the International Union of Pure and Applied Chemistry (IUPAC): A catalyst is a substance that changes the rate of the reaction but does not change the Gibbs free energy, the general standard of the reaction.
The role of a catalyst in a chemical reaction is called catalysis. Catalysts are also known in industry as catalysts.
The composition, chemical properties and mass of the catalyst itself do not change before and after the reaction; Its relationship with the reaction system is like that of a lock and a key, with a high degree of selectivity (or specificity). For example, manganese dioxide plays a catalytic role in the thermal decomposition of potassium chlorate, accelerating the rate of chemical reactions, but it does not necessarily have a catalytic effect on other chemical reactions. Some chemical reactions are not the only catalyst, such as magnesium oxide, iron oxide and copper oxide, which can also be catalyzed by the thermal decomposition of potassium chlorate.
Moreover, there is not only one catalyst for a chemical reaction, for example, potassium chlorate can also be used as a catalyst for the production of oxygen, such as red brick powder or copper oxide.
-
It's good to search for a faulty lamp shielding joint, and the lack of three-way catalytic filtration is not a big problem. Cheap dozens, good hundreds.
-
We are consulting with you, so be patient.
Of course, there are many other ways to solve it, if you solve it quickly, I recommend these 3, I hope to help you The platform service column can give an evaluation of my service. Thank you.
-
Some time ago, I encountered a fault like this, and I can install a TDTAS fault lamp to solve the dock
Hello, the catalytic converter system performance is below the threshold (row 1. Have a great trip. If I can help you, please set it to, thank you!
The quality is first-class, and the technology is very mature.
Jaguar is a British sedan brand-name product, and the trademark is a jumping forward"Jaguar"The sculpture, vigorous and brave, with a sense of the times and visual impact, not only represents the name of the company, but also shows the power and speed of the forward gallop, symbolizing that the car gallops around the world like a jaguar. Jaguar Cars is one of the top luxury brands in the UK and the world.
Fault description: The pressure sensor voltage of the diesel exhaust gas treatment device (DPF) is too high; >>>More
Hello, this shows that the Baojun 730 uses a self-priming engine with a displacement, and it is the lowest configuration model, that is, the cheapest model.