Lenovo Yangtian 6201k 00 how to restore the factory

1. **Activation: Call the bank customer service**, press "1, Chinese service", press "6, bank card service", press "1, card application and card activation", press"1. Card Enablement", press "1, ID card opening", enter the bank card number to be activated, enter the ID card number, enter the expiration date of the bank card, set or enter the password according to the voice prompt, and the system prompts that the bank card is successfully activated.

Shut down the computer, then press the novo key on the keyboard, the system will enter the one-click recovery interface, select the one-click restore function.

Due to the different operation steps, partitioning and other methods, the fault phenomena caused by it are not the same, mainly including: 1. Errors are reported during the reinstallation of the Windows system, resulting in the system cannot be installed normally. The specific manifestations are mostly blue screens when restarting after copying files, errors in the process of copying files, etc.; 2. Use the one-key recovery function to restore to the factory state, the recovery process is normal, but the system cannot start after recovery, the system cannot be found, or the black screen only has a cursor flashing in the upper left corner; Thank you for the specific reference.

What should I do if I want to restore factory settings?

2. Then click on the control panel in the upper left corner and click to open.

3. Then click on the font at the bottom.

4. Then click the font settings in the upper left corner of the pop-up box and click to open.

5. Finally, click Restore Default Font Settings in the red box in the figure below, and click to restore it with one click.

Lenovo notebook factory reset according to the model has different operations, it is recommended that the most professional way is to contact the "Lenovo" brand after-sales service, detailed according to the notebook model after the operation. The general method is given below:

1. First of all, back up the documents in the laptop before confirming that you want to restore the original factory settings in case they are lost. (Shut down after backup).

2. Then connect the computer to the power supply to turn on the switch of the power button, and press the F2 key quickly and continuously.

3. Then after the above operation, you will enter the system of Cheng Rescue, look at this system for 10 seconds, find out "one-key recovery", and then select and confirm "one-key recovery".

4. Next, select "From Initial Backup" to confirm, and the initial backup system will be started, in this case, the recovery system will overwrite everything in the C drive. Therefore, please do this step as a first step before restoring the original equipment.

5. Finally, according to the prompts of the system, press the confirmation and other operations. It's done with ease.

6. When restoring the system, you need to be careful and wait, just follow the system prompts. If you need to restart, you have to start it.

If there is important data in the computer, it is recommended to make a backup of the data before factory reset.

How to perform system recovery on a Lenovo notebook with a factory pre-installed win10 system:

1. In the shutdown state, press the one-key recovery button (make sure the laptop screen cover is open) 2. Select "System Recovery" Enter to enter the recovery interface, and click the "Troubleshooting" option;

3. Click on the "Reset this PC" option;

4. Select "Delete Everything";

5. Select "Windows only for drives";

There are two ways to choose:

You can choose the method that suits you according to your actual situation and needs (a complete cleaning of the drive is equivalent to a complete factory reset).

6. Click "Initialize" to start the recovery.

Wait for 100% of the restoration to complete.

Computer factory reset tutorial.

If you make a backup for you when you buy it, you can restore it, just follow the instructions step by step, if you don't make a backup, you can't restore it!

1. Press win+r to open the run, enter sysprep, press enter, enter the page, 2, double-click sysprep, 3, pop up a small window, below the system cleaning operation, select enter the new experience of the system, check the general, under the shutdown option, select restart, click OK, 4, the system will reset and restart, and restore the factory settings after completion.

For computers, system downtime is a big problem. Today, I will teach you how to reset the computer (Lenovo computer) when the system is paralyzed, please see the details below.

Tools Raw materials.

Lenovo computer. Method steps.

First of all, we can turn off the computer, in the shutdown state, press the picture below next to the boot next to the Xiaojian, press and hold for about 5 seconds. Wait for the restore screen to appear.

The selection screen appears and clicks on System Recovery, which is the fourth in the figure below. This is the System Restore option.

Once you're sure, you'll need to select a restore path. How you have no other backup to restore just choose the first one. An automatic restore from the system partition is sufficient.

Next, there will be some parameters for you to **, generally choose the next step directly. However, be aware that resetting takes a while and requires the computer to be plugged in. Turn on the power supply and click confirm.

The next thing to do is to wait slowly, which usually takes about 30 to 40 minutes, just pay attention to the time. The line below is the progress bar.

When the system display is complete, click OK and your computer will restart. When you turn on your computer again, you find that the software you installed is gone. Back to the state you originally purchased.

Pay special attention to the fact that if there is no problem with the system, you need to back up the software you need to keep.

Please back up your data in advance by following the steps below:

Turn on and tap continuously"F1 key", go to Rescue System, and select One-Click Recovery.

Select Step 1, Initial Backup Restore - Next - Start.

The recovery will take 10-30 minutes, and you can click Restart when the recovery is complete.

2.Then click the [Restore] option on the left side of the pop-up new interface, and click the [Start] button in [Reset this computer];

3.In the pop-up options interface, choose which way to restore factory settings;

4.Finally, click Next to enter the reset page.

4.Finally, click Next to enter the reset page.

Lenovo computer enters the one-click restore method.

1.When the Lenovo logo screen appears on the boot, press F2, and enter the Lenovo computer rescue system, at this time, select Lenovo one-key recovery (up, down key selection) or directly press the "R" key on the keyboard, then a screen will appear, press the left and right keys to select "Continue", then you will enter the "Lenovo one-key recovery" !!There are three options in it, namely system recovery, system backup and backup uninstallation, according to the operation you want to choose (or up and down key), press the enter key (that is, enter key) after selection, and then there is a specific operation method!

Note: If you choose System Recovery, please back up the C drive data first to avoid loss.

2.When the Lenovo logo screen appears, directly press and hold the shift key and the B key (there is a sequence, shift first and then B) and then directly enter the "Lenovo one-click recovery"! Once entered, the operation is the same as above.

3.Press F2 to enter Lenovo Rescue System when the desktop is turned on, press Shift+B to directly enter the system recovery, press F12 to enter the boot menu, and press F4 to enter the random driver and software installation interface.

How to perform system recovery on a Lenovo notebook with a factory pre-installed win10 system:

1. In the shutdown state, press the one-key recovery button (make sure the laptop screen cover is open) 2. Select "System Recovery" Enter to enter the recovery interface, and click the "Troubleshooting" option;

3. Click on the "Reset this PC" option;

4. Select "Delete Everything";

5. Select "Windows only for drives";

There are two ways to choose:

You can choose the method that suits you according to your actual situation and needs (a complete cleaning of the drive is equivalent to a complete factory reset).

6. Click "Initialize" to start the recovery.

Wait for 100% of the restoration to complete.

A computer is not like a factory reset on a mobile phone. What you mean by factory reset is reinstalling the system. If you don't understand anything at all, find someone who knows how to help you.

Just watch it a few times and you'll understand. It's not like the phone prompts you to have a factory reset. The computer is to be reinstalled on the system.

If your computer has not been reinstalled after buying it, then there should be a reset button, one-click factory reset. Press F9 when the BIOS restores the exit settings, and there will be a prompt when you enter the BIOS.

What should I do if I want to restore factory settings?

Hello, first, first of all, start the Lenovo desktop computer, open the win10 system, and then click on the "Start Menu" in the lower left corner of the desktop, and click on "Settings".

Second, then, find "Update & Security" in the "Settings" window and select Open.

3. Then, in the "Update & Security" window, find "Recovery" and click to open.

4. Then, find "Start" in the "Reset this PC" window and check to open.

5. Then, click "Erase Everything" and your Lenovo desktop computer will be factory reset.

6. Finally, click "Next", and the Lenovo desktop computer will start to factory reset, and the problem will be solved.

The steps for one-click restore are as follows:

1. Press the F2 button after booting up, you can start the one-key recovery and enter the main interface of one-key recovery;

<>3. Click Start (be sure to connect the power adapter during the recovery process, if the battery is out of power, it will cause the one-key recovery to be unusable).

4. One-click recovery will prompt whether to recover, select Yes, one-click recovery will start to recover;

5. Restore from user backup, you can restore the system to the state of user backup;

6. You can choose the default path or the path of self-backup from user backup and recovery;

7. If the user has not backed up, it will prompt the image file is invalid;

8. Select the recovery point you want to recover and click Next.

9. Click Start (be sure to connect the power adapter during the recovery process, if the battery is out of power, it will cause one-key recovery to be unusable);

10. One-click recovery will prompt whether to recover, select Yes, one-click recovery will start to recover.

If your computer is sold at the factory, if the system is available from the factory, it may be able to be restored. One-click recovery is just a rewrite of data to the C drive. It will not affect other disks.

It is impossible to restore without a backup. When you run a one-click restore, it prompts you to make a backup if you haven't done it, instead of running a restore directly.

No, when you restore it, only the system disk is protected, so the other disks won't lose anything.

What should I do if I want to restore factory settings?

2. Press F8 as prompted, and select "Repair Computer" in the advanced boot options.

3. System recovery option, select keyboard input method.

4. Enter the system administrator password.

5. In the System Recovery option, select Recovery Tools, and then select"lenovo factory recovery"。

6. In "Select your preferrd language"Select Chinese Simplified from the drop-down menu. Of course, here you can also choose other languages that the program supports.

7. Acceptance of Terms and Conditions.

8. Confirm the factory reset.

(1) When the Lenovo computer is completely shut down, press the "novo" key on the keyboard, like a "curved arrow icon" button, to start the one-click restore function to restore the factory system.

2) Lenovo one-click restore method and steps to restore the system:

1) To use the function of one-click recovery system, the hidden partition and standby image must not be damaged, this is because the pre-installed system of the brand machine is in the backup partition, if the hidden partition is deleted or destroyed, or the backup file is damaged or deleted, the function of one-click recovery system cannot be used.

3) There are two ways to open one-click restore:

The first is: the computer can be turned on normally, and then in the program of the start menu, find "Lenovo one-click recovery", click "System Recovery" to twist, you can restore after booting, and it will automatically restart in the process of restoration.

The second is: the computer can't be turned on normally, then you need to use the keyboard on the keyboard "curved arrow icon" to twist, use the one-key recovery button to restore a key to enter the restore interface: "Lenovo one-click recovery."

1) Enter "Lenovo One-click Recovery" to select the time point to be restored: If you have been spared in the system before, you can directly select the restore point time of the spare point to restore, that is, you need to select: "Recover from user standby".

Of course, you can also select "Initial Standby Recovery", so that the system can be restored to the pre-installed system at the factory.

2) The restoration process takes about 20 minutes, depending on the size of the system, wait for the restoration to be completed, and restart the computer.

2. Next, click the "Settings" button to enter the settings interface of Windows.

6. When doing the restoration, we can choose "Keep My Files" or "Delete Everything".