How big is a bottle or bucket of lithium grease?

Generally, lithium-based grease is available in 500g bags, 800g, 900g, 1kg, 2kg, canned, 4kg, 5kg, 14kg, 15kg, and barrels. 180kg, 200kg, large drums.

You said that you generally need special grease (** is quite high), but if the machine is not fine, you can also use lithium grease (economical).

General lithium grease is generally 2L per small tank or 25L per small barrel or 200L per large iron drum, if it is more fine, there are now branches on the market, one is about 500 grams, can be used with the grease gun, more convenient, is the highest higher.

Our factory uses Flik extreme pressure complex lithium grease, the packaging specifications are 500g barrels, 9kg barrels and 18kg barrels, I heard the masters say that there seem to be 180kg barrels, and the steel mill uses very good.

Canned 500g, 800g, 1kg

Barrels of 15kg, 18kg

For the screw grease above the packaging is seen a lot, but ** and packaging vary from brand to brand, you can consult the brand you want to buy, the latter directly hit the local lubricant ** company**.

Looking for industrial greases?

Bearing grease, the common model is Kluber BE41, Shanghai Hutou Hotolube's fully synthetic high-temperature motor bearing grease, fully synthetic high-temperature high-speed bearing grease, high-temperature heavy-duty bearing grease.

Grease for ultra-high temperature equipment, such as kiln cars, glass industry, etc., the common model is Kluber BE41, fully synthetic ultra-high temperature grease of Shanghai Hutou Hotolube, 1200 degrees and fully synthetic long-lasting high-temperature grease, 300 degrees.

Grease for low-temperature equipment, the operating temperature is -60 70 degrees, the commonly used model is Shanghai Hutou Hotolube's fully synthetic low-temperature aviation grease or fully synthetic ultra-low temperature grease, FUSD KLS8200, etc.

White grease for parts with lower rotational speeds to lubricate and seal. Common models: Kluber GLK 112, Hotolube fully synthetic fluoroesters and fluorosilicone greases.

Transparent silicone grease. Common models: fully synthetic lubricating grease from Tiger Head Hotolube, GLK 118 from Kluber

It's the difference between hard and soft.

No. 3 is just its NKGI number, that is, the penetration degree, No. 2 is at 265-295, the most commonly used, No. 3 is at 220-250, which is later than hard combustion, and is generally used in applications that require resistance to water or solid impurities, reducing equipment wear.

A little harder, more by hand, 2 a little softer and harder, more with a machine filling, can also be applied by hand. There is no difference in performance.

3. According to the NLGI classification, the degree of taper penetration (needle penetration), the grease is from 000 to 6, the higher the number, the harder the grease. 2 is commonly used lubrication, 3 is used for the lubrication of heavy load or vertical motor bearings.

4. The consistency is not the same, that is, the needle edge, the high concentration is used for low-speed motors, such as 6 and 8 motors, No. 3 is generally used, and the low concentration is used for high-speed motors, and No. 2 is generally used for high-speed motors.

Summary. Hello dear here, I have found lithium grease containing No. 10 engine oil, and the following are some common brands:1

Shell Gadus S2 V220 2Kluber Isoflex NBU 153Aerospace Great Wall 616 Mining Machinery Multi-effect Butter 4

Fosterwell L3 molybdenum grease The above products are lithium greases containing No. 10 engine oil, among which Shell, Kai, Fosterwell and other brands have a high reputation and popularity in the field of grease.

Hello dear here, I have found lithium grease containing No. 10 engine oil, and the following are some common brands:1Shell Gadus S2 V220 2

Kluber Isoflex NBU 153Aerospace Great Wall 616 Mining Machinery Multi-effect Butter 4Fosterwell L3 molybdenum grease The above products are lithium greases containing No. 10 engine oil, among which Shell, Kai, Fosterwell and other brands have a high reputation and popularity in the field of grease.

What is the number of lithium grease with 10 engine oil?

The lithium grease with 10 oil is the No. 2 lithium grease. Lithium-based grease is a commonly used lubricating material that consists of base oils, thickeners, and additives. Among them, the thickener is lithium-based, which can make the grease have good high temperature resistance, extreme pressure performance and oxidation resistance.

The addition of 10 oil can increase the viscosity of the grease, enhance its lubricating properties and anti-wear properties. No. 2 lithium grease is a commonly used multi-purpose grease that is suitable for the lubrication of various mechanical equipment, such as bearings, gears, chains, etc. It has good water resistance and high temperature resistance, and can be used in a wide range of temperatures.

Grease can be divided into soap-based grease and non-soap-based grease, calcium-based grease, lithium-based grease and other greases in soap-based grease are water-resistant, not easy to emulsify, etc., and are widely used in construction machinery lubrication and other fields. The construction machinery grease produced by AllianceBernstein Lubrication Technology is selected according to the following points: industrial machinery should choose chemical-resistant synthetic oil grease such as fluorocarbon grease in the environment of reinforced media; The grease selected for construction machinery should be compatible with the grease supply method of the friction pair.

If you need centralized grease supply, you should choose No. 00-1 grease, for regular grease guns, grease cups and other grease filling parts, you should choose No. 1-3 grease, for long-term use without grease change parts, should choose No. 2 or No. 3 grease. The grease of construction machinery should be adapted to the working state of the friction pair, and when the vibration is large, the grease with high viscosity, good viscosity and shock absorption should be applied, such as the composite soap-based grease thickened by high-viscosity naphthenic or mixed-based lubricating oil.

Construction machinery products, outriggers, booms and other heavy load parts of the pins, sprockets, gears and other parts of the grease, I found that most of the filling is molybdenum disulfide 3 lithium grease, but the working temperature of this part is not high, can you change to ordinary 3 lithium grease, can save costs. In addition, the use of grease with molybdenum disulfide, in addition to the severe disaster, does it also have the effect of prolonging the service life of the grease and reducing the number of fillings? Whether it is ordinary No. 3 lithium grease, or No. 3 lithium molybdenum disulfide grease, or any other model, the general lithium grease has good water resistance, mechanical stability, rust resistance and oxidation stability, etc., and is a kind of grease with multi-purpose long life and wide temperature range.

The national standard for general lithium grease products GB7324--2008

Lithium-based grease is made of hydroxyl fatty acids, lithium soap, thickened mineral oil, and added anti-oxidation, anti-rust, anti-corrosion and other extreme pressure anti-wear additives. Lithium-based grease has excellent water resistance, mechanical stability, extreme pressure and wear resistance, water resistance and pumpability, rust resistance and oxidation stability. Lithium-based greases also provide excellent lubrication performance under extremely harsh operating conditions.

Extreme pressure lithium grease is an anti-extreme pressure grease prepared by thickening mineral lubricating oil with fatty acid lithium soap and adding antioxidants and extreme pressure agents, which can also be used for centralized lubrication system by lubricating high-load mechanical equipment bearings and gears with a working temperature of -20 120 temperature. Molybdenum disulfide extreme pressure lithium grease is a lithium grease made of deeply refined mineral oil combined with molybdenum disulfide dry extreme pressure agent after careful blending, with good heat resistance, water resistance, rust resistance, good extreme pressure performance, and a maximum operating temperature of 120, suitable for parts with high load or impact load, **moderate. For example, Tieba lithium molybdenum disulfide grease.

Lithium-based grease is made from natural fatty acids (stearic acid or 12-hydroxystearic acid) lithium soap, thickened with medium-viscosity mineral lubricants or synthetic lubricants, while synthetic lithium-based greases are made from synthetic fatty acid lithium soaps, thickened with medium-viscosity mineral lubricants.

Lithium-based grease, especially the lubricating grease thickened with 12-suspicious lithium stearate soap, after adding antioxidants, rust inhibitors and extreme pressure agents, becomes a multi-effect and long-life general grease, which can replace calcium-based anti-lubrication grease and sodium-based grease for bearing lubrication of aircraft, automobiles, tanks, machine tools and various mechanical equipment. Automotive general purpose lithium grease is made of fatty acid lithium soap, thickened with low freezing point mineral oil, and added with rust inhibitors and antioxidants. The product has good mechanical stability, colloidal stability, water resistance, rust resistance and oxidation stability.

Use lubrication of friction parts such as automotive wheel bearings, chassis, water pumps and generators with an operating temperature range of -30 120. The national standard for general lithium grease for automobiles is GB T5671--1995.

Lithium-based grease is made from natural fatty acid lithium soap, thickened with medium-viscosity mineral lubricants or synthetic lubricants, while synthetic lithium-based greases are made from synthetic fatty acid lithium soaps, thickened with medium-viscosity mineral lubricants. Lithium-based grease, especially the lubricating grease thickened with 12-suspected lithium stearate soap, becomes a multi-effect long-life general grease after adding antioxidant chemical agent, rust inhibitor and extreme pressure agent, which can replace calcium-based anti-lubrication grease and sodium-based grease for bearing lubrication of aircraft, automobiles, tanks, machine tools and various mechanical equipment.

Lithium-based greases, especially greases thickened with lithium 12-stearate, have only two intersection temperatures, the first intersection temperature (i.e., from pseudo-gel state to gel state) is generally above 170, and the second phase transition temperature (i.e., from gel state to sol state) is generally more than 200 per cent, so when a suitable mineral oil is selected, it can be used for a long time at 120 or short-term use to 150.

Lithium-based greases, especially those thickened with lithium 12-stearate, can be seen by electron microscopy in the form of double-stranded, tangled twisted bands of soap fibers, and therefore have good mechanical stability.

The adsorption heat of alkanes by 12-lithium stearate and lithium stearate was determined by gas chromatography, and it was found that the binding strength of lithium 12-top lipate and lithium stearate to the liquid phase on the surface of soap fibers and the binding strength to the liquid in the crystal lattice were larger, so the lithium-based grease had good colloidal stability.

Lithium grease is made of deeply refined mineral base oil, mixed with antioxidants, extreme pressure anti-wear agents, rust inhibitors, thickeners, etc., lithium grease is divided into several types, and the composition of each variety is different. The Optimum lithium grease of Jiangsu Lead Ming Anda Lubricating Oil is made of 12-hydroxystearic acid, lithium thickener and deeply refined mineral base oil, and added anti-oxidant, anti-rust and other additives, and is manufactured by special process. The product has excellent mechanical stability, stable structure, excellent water resistance and adhesion, and is not easy to thin and lose in use.

It is suitable for lubrication of friction positions of wheel bearings, chassis, motors, water pumps and other mechanical equipment of medium-sized and heavy-duty vehicles.

The different numbers are not cluttered with the same density, but they are all left and right.

Therefore, 1 liter is about 1 liter = macro bucket cm3 * 1000cm3 = 920 grams.