Connect your computer with a router How to access the Internet

If you use a router to surf the Internet, DNS is the same as the gateway address, that is, the address of the router, which is generally or, and there are but very few. Generally, if you haven't entered the router, it defaults to DHCP is turned on, that is, the machine connected to it is set to automatically obtain, and you can get the network settings.

If you have it, fill in the DNS of the local connection according to the above, and then type the gateway address in IE to enter the router and set up the Internet access and password.

Do not specify the IP address of the computer.

Looking at the routing specification, the routing address is generally or.

It shouldn't be your address.

After entering the route, use the setup wizard, use the pppoe mode, and enter the password.

DNS servers to find a network access provider. Or check out your neighbor's.

The routing address is generally OR.

The password is the same as the admin account and password.

It is recommended that you preferably follow the instructions for setting.

You first open it and log in the password to buy the cat. Different brands have different passwords for cats. Then create a new network connection in the network settings.

Set it up like the small note on the cat you bought it. Then there is the auto-connection at the bottom. You type in your broadband password.

You can do without it later. You can also connect several computers to a cat.

I had this issue once. - This issue. This is my third time.

1. After connecting the computer to the powered-on router, enter the Enter key in the address bar of the computer browser.

2. After the page jumps, enter the account and password of the router in the login window and click to log in (the account and password are marked on the back of the router).

3. After logging in to the background of the router, you can click on the WAN settings under the interface settings, select the network connection mode, enter the Internet access and password, and click Save.

4. You can also click LAN settings to enter the start and end IP pool of the router and the default gateway, etc., and then click the save button.

5. At the same time, you can also click the system tool to set the login and password of the router.

Notes:

If you cannot log in by entering the password on the back of the router on the login screen, you can reset the router to factory settings, and then log in according to the password marked on the back of the router.

How to connect your router to your computer.

1.We need to connect the wireless router and network cable first.

2.Turn on your computer, click on this computer.

3.Click Network.

4.Click Set up a new connection or network.

5.Click Set up a new network.

6.Enter the information that is your account and password that you will be told when you install the broadband, enter it directly and click Next.

7.Open your browser, enter and then enter your account and password. It's all admin.

First of all, your router must provide an auto-dialing function, set up PPPOE automatic dialing and password, in addition, you must set a machine as the host, and set the main IE to allow other computers to share the Internet, and the other machine, the IP acquisition method is set to automatic acquisition, so that you can share the Internet with two or more machines.

Step 1: Connect the line.

Before there was no router, we directly connected to the broadband through the computer, so now we want to use the router to share broadband Internet access, of course, we must first use the router to directly connect to the broadband.

Step 2: Configure your computer.

The computer and the router need to communicate, so the first thing to do is to set up the computer. For most computers, you don't need to do any settings by default, you can skip this step and go directly to step 3, if you can't log in to the router management interface in step 3, you can go back here to configure the IP address of the computer. Double-click the local connection in the lower-right corner of your desktop"Small computers"Icon.

(If there is no network card icon in the lower right corner of the computer, the method of entry is as follows.)"Start - Control Panel - Network Connections - Double-click Local Connections"), and then configure it as shown in the figure below.

After the above configuration, your computer will automatically turn to the router"Ask for it"IP address, the router will also assign parameters to the computer after receiving the request, and click the small computer icon in the lower right corner of the computer after success, and connect to the state locally"Yes"In the tab, you can see the parameters obtained by the computer.

Step 3: Set up your router to access the Internet.

Follow the above method to connect the router to the computer.