Why do new tires have side slippage, what should I do if the tires slip

New tires slip ? I'll help you analyze it first, I don't know if you've ever watched a car race? They all had to run a certain distance before the start of the race.

And swaying from side to side, in fact, they are just to grind tires. Because when the new tires are installed in the car, the tires have to take a while to get used to the car. Because the grip of the new tires is not yet the strongest.

It's good to wait until it's grinded out. Because the tires have a certain angle when they are on the car, I don't know if you have observed them. If you are given a new pair of shoes, it is also difficult to walk when you first wear them, so it is good to wear them for a while.

The same thing. Be nice to your car, because it will protect your life. If you brake, the brakes will also slip sideways if they are not consistent.

Tire specifications are not the same. Some also slide sideways. I wish you all the best.

The excuse is to take advantage of the UU space enclave geothermal.

Wheel slippage: 1. Rear wheel slippage will cause the vehicle to swing sideways and flick its tail in the road;

2. The four wheels are skidding, and the four wheels cannot be rotated due to the locking of the brake process;

3. The front wheel slips mostly when the speed is too fast and the road surface is too slippery when the car is too fast when bending or turning. Wheel slippage.

Causes of wheel slippage: Tire slippage is caused by the tire reducing the adhesion to the road surface and the driving deviates from the direction of travel. This is caused by improper measures taken by the driver, such as braking too hard, accelerating too fast or hitting too fast.

Solution: 1. No matter which direction the vehicle skids, at this time, you should hit the steering wheel in the direction of the skid and remember not to brake, and all actions should be as gentle as possible. (for Scenario 1).

2. Let the front wheels find the ground first, close the throttle, do not step on the brakes, tap the clutch, and all movements are as gentle as possible. Allow the vehicle to drive slowly until the skidding disappears. (for case 2).

3. After the wheels rotate, the steering wheel can be rotated until it returns to normal, and the brakes are repeatedly stepped on so that the oil circuit can reach the most effective working state. (for case 3).

1.Check the tires for wear and tear.

After the tire slips, the first thing to check is whether the tire has been worn, the tire is used for a long time, the pattern on it will continue to wear, resulting in the continuous decline of the tire's grip ability, so the friction and braking ability will also decrease. If the tires have worn out to the safety line, it is time to replace the tires in time.

2.Clean the tires of stones and dirt.

There are a lot of grooves on the tire, although the groove can increase the friction of the tire, but the adverse consequence is that if you drive on a bad road surface, it is easy to get stuck on the stone and soil, they will reduce the friction of the tire, and even slip in situ, at this time, you need to clean it up, if it is the soil, you can directly use a tool to dig it out, if it is a stone, you need to use the stone hook to hook out, there are many types of hooks on the stone hook, and it is very efficient to clean the stone.

3.Tire pressure adjustment.

An important reason for tire slippage is that the tire pressure is too high, resulting in a decrease in the contact area between the tire and the ground, so there is slippage, and the tire pressure needs to be adjusted. However, the tire pressure should not be adjusted blindly, and should be adjusted according to the actual situation. If you are preparing to go to the high speed, the tire pressure should be appropriately lowered when it is too high to prevent the tire temperature from rising further and the tire pressure from increasing further after reaching the high speed.

If it is a rainy day, it is not advisable to blindly reduce the tire pressure, because the water and the road surface itself will form a layer of water film, reducing the tire pressure may instead lead to the rain can not be drained out, and the slippage is more serious.

4.Install snow chains.

For serious skidding, you can consider installing snow chains on the tires, such as icy roads, snow, or too smooth roads, etc., at this time, no matter how good the tires will be skidding, at this time, you should first reduce the driving speed to avoid safety accidents, and people who have the conditions and need can install snow chains on the tires. There are hundreds of nails on the snow chain, which is very helpful for improving the slip resistance.

In addition to doing a good job of anti-skid measures, you can also do certain maintenance measures on tires in daily life, such as spraying tire wax on tires, tire wax can be used to polish and clean tires, and can also effectively protect tires, because it can form a protective film between tires and the external environment, slow down the wear of tires, prevent tires from aging due to sun exposure and water immersion, tire wax to enhance the anti-skid ability of tires also has a certain improvement.

Have the majority of car owners and friends encountered the situation of car tire slippage while driving? This is actually quite dangerous, so what exactly causes the wheel to slip? What are the phenomena of wheel slippage?

What should I do if I encounter wheel slippage? Today, 17 Auto Parts Network was fortunate to invite automotive experts to answer for me one by one.

Automotive Expert: First of all, there are generally 3 cases of wheel slippage.

1.The front wheel is slippery, which is also a situation that most car owners will encounter, and we may encounter such a situation when we turn a big corner.

2.The four tires slip together because the four wheels are locked and cannot turn during braking.

3.Rear wheel slippage will cause the vehicle to swing sideways in the middle of the road, which is also one of the more dangerous because we are very good at maneuvering the car.

Automotive experts: Experts suggest that no matter which direction the vehicle skids, at this time you should hit the steering wheel in the direction of the skid and remember not to brake, and all movements should be as gentle as possible. Secondly, when the four wheels are skidding, the owner will feel that the vehicle is surging forward faster than usual.

At this time, we first let the front wheels find the ground, close the throttle, do not step on the brakes, tap the clutch, and all the movements are as gentle as possible.

Then when there is a wheel slippage, many car owners will be in a hurry because they have just come into contact with the car, and the tension may lead to more serious situations. Then it is recommended that everyone keep a calm mood, do not slam on the brakes, should take the steering wheel, control the direction, and slow down slowly. Usually, everyone should pay attention to the maintenance of car tires to prevent accidents.

What should I do if my car skids?

The first thing to do when a car skidding is to stay calm and not panic. The steering wheel is then adjusted according to its slippage.

When the front wheels are slipping, wait for the wheels to turn, turn the steering wheel so that the front wheels are correct, so that the rest of the body direction is the same, and then gradually control.

Rear wheel slippage should pay attention to do not step on the brakes too hard, responsible for the easy to cause rollover accidents.

For four-wheel skidding, you need to let the front wheels find grip first, then close the accelerator, press the clutch lightly, gradually turn the car back to the right, and drive slowly until there is no skidding.

How can I prevent tire slippage?

1. Install snow chains.

Most of the reasons for car skidding are because of the decline in friction, and installing snow chains on the car can effectively increase the friction between the tire and the ground, so as to avoid the appearance of tire skidding, which is mostly used for ground icing, snow and other conditions.

2. Check the tires in time.

In daily car maintenance, it is necessary to observe the wear and tear of tires in time, and then adjust the maintenance according to their conditions.

1.Rear-wheel drive cars: let go of the accelerator pedal, turn the steering wheel to turn the front wheel to the right, lightly press the accelerator to turn back to the correct direction;

Front-wheel drive cars: Slowly relax the accelerator pedal and turn the steering wheel to the direction of travel, return to the steering wheel and slowly accelerate to driving.

Ingredients: 400g of dried fragrant ingredients: appropriate amount of vegetable oil, 3g of salt, 4g of chili powder, 3g of Sichuan pepper powder, 4 teaspoons of sesame pepper red oil, 2g of sugar, 2g of dark soy sauce, 5g of white sesame seeds, 3g1 of pepper, prepare raw materials.

2. Cut the dried incense into strips. 3. Heat the pan with cold oil, and the oil is hot for 8 into fragrant dry. 4. Fry until the skin is golden and 8 mature, remove and drain the oil.

5. Leave the bottom oil at the bottom of the pot, add sugar and fry over low heat to melt. 6. Add Sichuan pepper powder, chili powder and pepper and stir-fry evenly. 7. Add the fried fragrant dried.

8. Add dark soy sauce and salt. 9. Stir-fry the pepper and red oil evenly. 10. Add white sesame seeds.

11. Wrap the seasoning around each dried incense. 12. a finished product.

First, the front wheel is slippery.

When the front wheels slip, one of the phenomena is that no matter how you turn the steering wheel, the front of the car will go straight ahead. The reason is usually that the acceleration is too strong when cornering, and the specific solution depends on the front and rear wheel drive cars.

1.Rear-wheel drive cars.

Step 1: Release the accelerator pedal, do not press the brake or clutch pedal;

Step 2: Turn the steering wheel to turn the front wheels in the same direction as the body, but don't overturn. so as not to slip the rear wheel;

Step 3: After the front wheel adhesion is restored, gently press the accelerator and turn back to the correct direction.

2.Front-wheel drive cars.

Step 1: Slowly relax the accelerator pedal, don't let go, and keep the car moving. If you slow down suddenly, the rear wheels may also slip. Do not press the clutch or brakes, and do not turn the steering wheel right.

Step 2: Continue to turn the steering wheel slowly and turn in the direction you want to drive, but don't turn too hard or too much.

Step 3: After the direction of the car is corrected, return to the steering wheel, and then accelerate slowly.

Second, the rear wheel slips.

When the rear wheels slip, the rear of the car slides to one side, and even the body spins violently. Whether it's a front-wheel drive car or a rear-wheel drive car, the approach is the same.

Step 1: Release the accelerator or brake pedal, do not press the clutch pedal, do not hold the steering wheel tightly;

Step 2: Turn the steering wheel in the direction of the rear coast, for example, if the rear of the car slides to the right, turn right to the side. But if you turn too much, the car will spin in the opposite direction;

Step 3: After correcting the slippage, slowly accelerate.

Rear wheel slippage can occur, usually when the speed is too high when entering a curve or when driving on a smooth, rough or high arch road and the brakes are too strong.

In general, when the front wheel is slipped, pay attention to whether the car is front-wheel drive or rear-wheel drive to deal with it. The method of handling rear wheel slippage is the same.

Three or four wheels skidding at the same time.

In this case, the car is nothing more than a straight forward without slowing down, and you will feel that the vehicle is surging forward faster than usual. If you encounter a sloping road, the car will be on the lower side. Mainly because of the brakes that are too strong.

Specific operation: Relax the brake pedal without delay or urgency until the four wheels return to rolling, and do not press the clutch pedal.

On wet or rainy days, the pavement will be covered with a film of water. When the car is driving at high speed on the water film, the water film will have a dynamic lubrication effect on the tire; When a certain speed is reached, the combined effect of dynamic lubrication and water film lift will cause the tire to detach from the road surface, and the phenomenon that the tire slides and is above the water film becomes the "hydroplaning phenomenon".

When it rains, the tyre contact area is divided into 3 zones:

1. Complete floating area: the fluid pressure of the water film is greater than the contact pressure between the tire and the ground, and the tread is lifted to completely separate the tire from the road surface.

2. Incomplete contact area: due to the extrusion of the tread, a large amount of water overflows, but there is still a thin water film, and the tread is partially separated from the road surface.

3. Full contact area: the tread is in complete contact with the road surface.

When the vehicle reaches a certain speed (or the water film reaches a certain thickness), the complete contact zone disappears, and the tire does not contact the ground at this time, forming a "water drift" state. It is very dangerous to have a "hydroplaning phenomenon", when the tire loses its adhesion, and in severe cases, the whole vehicle will suddenly change direction, or even overturn.

Why do tires slip on rainy days? As long as you learn these two tricks, it will be safe even if it rains heavily.

In the future, you can buy tires with strong drainage. When driving in the rain, try to use gears to control your speed and avoid emergency braking. To drive safely, release the accelerator pedal when the rear wheel slips; Press the clutch, turn the steering wheel to the side of the skid, and swing the body back to the direction.

After the car was completely straightened, it was normal to continue the trip.