-
Anonymous users2024-02-05The problem you are causing should be too much dust, because the computer case is not completely enclosed, and static electricity will attract dust, so dust can easily enter the computer. When dust adheres to the surface of the integrated circuit, it will cause poor heat dissipation, and in severe cases, it will cause a short circuit. Optical drives, floppy drives, and displays are most afraid of optical drives.
If too much dust is adsorbed on the optical head of the optical drive, it is easy to cause a sharp decrease in the ability to read the disk. Dust can damage a floppy drive in a similar way to an optical drive. In a monitor, too much dust can easily burn out the display.
For example, keyboards, mice and other accessories are afraid of dust. Therefore, it is best to pay attention to dusting the computer.
-
Anonymous users2024-02-04Yes, if you encounter this kind of problem in the future, you can just change the host!
-
Anonymous users2024-02-03Learned a little bit more, hehe. Mentor.
-
Anonymous users2024-02-02I got to change the computer, and the computer is very cheap now.
-
Anonymous users2024-02-01If the fault doesn't appear again, don't ask, faint.
-
Anonymous users2024-01-31Power supply issues Repair is recommended.
-
Anonymous users2024-01-30Computer boot difficulties can be regretted that the pins can be caused by various reasons, such as hardware failure, system setting problems, insufficient power supply, battery shortage, viruses, etc., the following is how to solve the computer boot difficulties:
1.Check the power supply**: If the computer does not turn on normally, first check whether the power supply** is normal. If the plug is not plugged in properly or the battery is out of power, it may also affect the computer's boot.
2.Check for hardware failures: Computer boots are also affected by hardware failures, such as hard disk or memory failure, graphics card failure, etc. Check if the fault requires hardware replacement.
3.Virus removal: The presence of viruses or malware on your computer can also make it difficult to boot up. Biyou scans and removes viruses by installing software.
4.System settings check: Whether the computer's system settings are correct may also affect the computer's boot. Check whether the BIOS settings are correct and restore the default settings.
5.Software compatibility: Sometimes the computer has incompatible software, which can also cause the computer to have difficulty booting. Uninstall the software in safe mode.
6.Drivers: Some drivers may have trouble booting up if they have problems with their drivers or are not compatible with your system. Update or uninstall drivers.
In short, if you want to solve the problem of computer boot difficulty, you need to comprehensively consider all possible causes and troubleshoot and solve them one by one. If it still can't be solved, it is best to consult a professional so that it does not lead to more serious problems.
-
Anonymous users2024-01-291. Poor heat dissipation: Monitors, power supplies, and CPUs generate a lot of heat during work, so it is very important to maintain their good ventilation conditions.
2. Improper movement: In the process of computer movement, it is often loosened by a large vibration that often loosens the internal components of the machine, resulting in poor contact and computer crash.
3. Dust killer: Excessive dust accumulation in the machine will also cause crash failure.
4. Equipment mismatch: If the main frequency of the motherboard and the CPU do not match, if the external frequency is set too high when the old motherboard is overclocked, the stability of the operation may not be guaranteed, resulting in frequent crashes.
5. Software and hardware incompatibility: three-dimensional software and some special software missing parts sometimes cannot be started or even installed normally on some microcomputers, which may have problems with software and hardware compatibility.
6. Memory module failure: It is mainly caused by loose memory module, virtual soldering or the quality of the memory chip itself.
7. Hard disk failure: mainly due to the aging of the hard disk or due to improper use, the bad cover dry channel, bad sector. Hongdong is so that the machine is prone to crash while running.
8. Insufficient memory capacity: The larger the memory capacity, the better.
Both of your situations here are normal.
1. No matter what optical drive may appear, some disks do not respond after putting them in, it may be that the disk is not good, too flowery, too thin, too translucent, etc. The ability to read the disc of foreign brands of optical drives has never been good in China, because foreign countries are very pirated disks, and the quality of the base disk is ***. >>>More
There is a startup item with multiple startups, or there are system items to start or service items to start, you can take a look, according to 360 and other prompts, turn off the ones that should be closed, basically it's OK, and then the slow startup of the computer is not all the problem of startup items, and it is also possible that the system files are large and many, and most of them are left behind when you install or delete the program, and it will slow down when it is actually long!
An error occurred in modifying the BIOS settings.
02.If it is the boot data of the magnetic region of track 0 of the hard disk, it is incorrect. If it is a hardware failure, use the backup component to cross-check by itself. >>>More
Based on the situation of the landlord, the computer does not start at all, you should rule out the software, display, sound, memory module problems, then the only possible problem is the failure of the hard disk; Problems with the power connection socket; The regulator is damaged. It is recommended to drag a repair person outside to check, they have all tools, and the door-to-door fee is roughly ranging from 20 to 50, you can bargain, I wish the landlord a computer as soon as possible.
Can you hear the sound of windows when you start?,If there is no sound, it may be a big problem with the host.,If there is a sound, it may be that the monitor is not displayed.。