How to adjust the pressure of TOTO toilet SW981B type

SW981RB needs to adjust the height of the inlet valve to adjust the water level and thus the flush pressure, as follows:

1. Open the lid of the toilet, and you can see the inlet valve of the toilet, which is the blue lid in the picture.

2. Use a slotter driver to adjust the float counterclockwise to adjust the screw, and dispatch the float downward.

3. Find a green thing on the inlet pipe, each toilet may be different in color, but the position and shape are similar.

4. Use a screwdriver to push it up, and push it down with the other hand as indicated by the arrow, pushing it 5 cm almost, and the more you push, the less water in the tank.

5. After completion, the automatic water inlet again can be seen to be a lot less, so that you can adjust the amount of water for each flush, otherwise it is to increase the amount of water upward.

How to control the amount of water in the TOTO toilet with one switch? 1.Tank type:

There is a toilet with a water tank at the back, and when flushing, the water always feels weak, so you can improve it by adjusting the amount of water in the tank. As for the switch at the back of the toilet, it is to adjust the amount of water inlet into the water tank, regardless of the flushing force. 2.

Pressure: It flushes when pressed by the wrench (there is no water tank at the back of the toilet), but it is not"There is a switch at the back of the toilet that can be turned with a vise".Instead, there is a screw with a circular slotted hole threaded hole on the adapter next to the pipeline next to the pressure spring barrel (the same as the shower head and the wall elbow to adjust the size of the water outlet), and turning to the right with a slotted driver will cause a large amount of water to flush.

Zhangjiama poke was bought in 14 years, and the water can't be closed after 6 years

Summary. Hello, I am happy to serve you, 1. If the toilet is already full of water, but it will automatically leak out later, generally because there is a problem with the inlet valve. When we buy, we should take into account the quality of the inlet valve, which may also be caused by improper installation, so it will lead to the problem of overflow after the toilet is filled with water.

2. You need to choose the water inlet valve of the same specification to reinstall, and at the same time check the position of the pontoon, whether there are any impurities, if there are any, you need to clean it, and adjust its position. Hope it helps.

After the TOTO SW981B toilet is filled with water, it leaks, what is the problem?

Hello, the slow source bucket is very happy to serve you, 1, if the toilet has been full of water, but the later disturbance will automatically leak out, generally because of the inlet valve cracked hail problem. When we buy, we should take into account the quality of the inlet valve, which may also be caused by improper installation, so it will lead to the problem of overflow after the toilet is filled with water. 2. You need to choose the water inlet valve of the same specification to reinstall, and at the same time check the position of the pontoon, whether there are any impurities, if there are any, you need to clean it, and adjust its position.

Hope it helps.

The position of the pontoon is on the drain valve, or on the inlet valve.

Hello, drain on the valve.

Summary. Pro, siphon, TOTO toilet CSW719 is a siphon. TOTO toilet CSW719 toilet is a siphon silent toilet, and the toilet can be divided into direct flush type and siphon type according to the flushing method.

The siphon toilet has an inverted S-shaped pipe inside. Siphon toilets have a strong ability to drain water, can flush away dirt that sticks to the surface of the toilet, and has low noise, so many toilets use siphon type.

Pro, siphon, TOTO toilet CSW719 is a siphon. TOTO toilet CSW719 toilet is a siphon silent toilet, and the horse holding bucket can be divided into direct flush type and siphon type according to the flushing method. The siphon toilet has an inverted S-shaped pipe in front of the ear potato.

Siphon toilets have a strong ability to guess the drainage, can flush away the dirt that sticks to the surface of the toilet, and has low noise, so many toilets use the siphon type.

The toto has a generous shape, smooth lines, and a decent design. Although there is nothing special about this product, it is one of Anwar's best-sellers, which naturally benefits from its excellent product function. Craft:

1268 degrees high temperature firing 18 hours toilet using high-quality orange silica salt raw materials, and high-quality natural mineral raw materials through selected blending, and the use of foreign high-pressure molding process to improve the predecessors of the molding, the body is dense and good, high strength, delicate texture, and then through the 116 meters long, meters wide Bo Wu Pei tunnel kiln, 1268 degrees high temperature firing, firing cycle base only up to 18 hours, so that the product water absorption rate is lower, to reach the scale of vitrified porcelain, the expansion coefficient is small, to ensure that it will not be due to the sky, Environmental changes such as temperature cause the product to produce late glaze cracks.