How to prioritize system startup items, and how to set system boot auto start items

Hello, first of all happy for you with this question.

Select the desktop My Computer right-click Properties Advanced - Boot & Recovery Click Settings System Boot Default Operating System drop-down list to select one. P.S. Take a look.

This section describes how to specify the priority of a self-starting project.

1. Create a new folder, for example: c:ordered launch, and then put "Start|".All Programs|Cut all the shortcuts in the "Startup" folder into this folder, and then put the shortcuts for the project you want to start automatically into this folder as well.

2. Enter "cmd" in "Run", open the console mode, and then switch the current directory to "C:Ordered Launch". Once you have switched directories, enter the command "dir b s >

Then enter the command "notepad" to open the batch file you just created, and you can arrange the auto-start projects in the order you want in the open notepad. It's important to note that each project needs to be enclosed in quotation marks and start with "start", e.g. start"c:

ordered launchfirst "。

3. Double-click on the batch file to test, and these self-starting projects will be launched in the scheduled order. However, if one of these items takes a lot of time to initialize, the order of autostarts can be messed up. But don't worry, in this case, you can add a delay below those projects that start slowly, for example:

ping -n 5 > nul", this command can provide a delay time of 5 seconds, and by changing the number after "-n", you can get a different delay time.

4. After testing the batch file, open the "Start|" of the Ghost XP SP3 systemAll Programs|Launch the folder, then right-click and drag the batch file into StartAll Programs|Launch" folder, select "Create Shortcut" in the pop-up menu.

1. Find the Start menu on your computer and click to open the Start screen.

2. Find the computer in the start menu, right-click on the Imperial Navigation menu, and click Properties.

3. In the Properties screen, click on the Advanced System Settings option.

4. In the interface that jumps to you, click Advanced Options at the top.

5. Find the Startup and Failback options in the interface that opens, and click Settings.

6. In the settings interface, click on the default operating system and select the system that starts first.

7. Finally, click OK below.

In our computer operation, some software or services need to be automatically started when the computer is turned on, so that it can be convenient for us to use. However, if the system boots up too many auto-start items, it will slow down the boot speed and affect the performance of the computer. Therefore, we need to properly manage the system boot auto-start items.

Next, we will introduce how to set up the system boot auto-start item.

Method 1: Use the built-in tools to set up autostart.

The Windows system comes with a tool called Task Manager that we can use to set up autostart. The specific steps are as follows:

1.Open "Task Manager": We can open it by pressing the "Ctrl+Shift+Esc" shortcut, "Right Click-Taskbar-Start Task Manager", or search for "Task Manager" in the "Start Menu".

2.Go to the "Startup" tab: Select the "Startup" tab in the Task Manager window.

3.Disable Enable Startup Items: You can select the startup items you want to disable, right-click, and select "Disable"; Otherwise, select "Enable".

Method 2: Use a third-party tool to set up auto-start.

In addition to the "Task Manager" that comes with Windows, we can also use third-party tools to manage auto-start items. At present, the most commonly used ones are ccleaner, autoruns, and so on. Here are the steps to set up auto-start items using CCleaner:

2.Go to the "Tools" tab: After opening CCleaner, select the "Tools" tab.

3.Go to the Startup tab: Select the Startup tab in the Tools tab.

4.Disable Enable Startup Items: You can select the startup items you want to disable, and click the "Disable" and "Enable" buttons on the right side of the corresponding startup items.

Summary. Reasonable management of system boot auto-start items can improve the performance of the computer, we can use the task manager that comes with Windows, or we can choose to use a third-party tool to manage it. When setting auto-start items, you need to select and choose according to actual needs, and do not set too many settings to avoid affecting the performance of the computer.

If our computer is a dual system.

of,I forgot to choose when I booted up,Generally, the first system will be chosen,So how to set the default system to boot the first start?、The following is how to choose the default system boot first boot of the dual system that I collected and sorted,I hope it will help you

Dual system selects the method of the first boot of the default system

We found the computer on the desktop, mine is a win8 system.

It's "this computer".

Let's right-click and select "Properties".

In "Computer Properties" we select "Advanced System Settings".

In "Advanced system settings" we select "Startup and failback" and we click on "Settings".

This brings you to Boot and Failback.

We're in "Default Operating System", and we're going to drop down and select one of our dual systems. I selected "as the default operating system" and finally clicked "OK".

Benefits:1It is convenient to use both systems to work or play.

2.If the dual system is not in the same partition, it can be cross-killed, one system is broken, and the other can still be persistent.

3.Best compatibility.

Disadvantage: 1Problems such as compatibility and capacity can be deleted at any time. But it is necessary to note that the loading system is best from low to high for hungry potatoes, such as C plate.

It's win xp.,That's better not to install a version lower than this.。

2.The disadvantage is that it takes up disk space, and the two systems cannot run at the same time, so you have to switch to start the machine.

3.It is more difficult to maintain the bad ones.

The steps to set the boot startup items under the system are as follows:

1 First of all, open the "Run" dialog box, you can open the run through the start menu, or you can press the shortcut key win+r to open "Run", enter "msconfig", and press Enter.

2 In the system configuration dialog box that opens, click "Start". This is where the functions of configuring the boot startup items and boot startup program come in.

1. Click the shortcut key "win+r" to open the running window dialog box.

2. Enter "msconfig" in the box and click, and the system configuration dialog box will pop up.

3. Click Startup Options at the top of the System Configuration dialog box.

4. Open the Task Manager option in the picture frame.

5. At this time, all the boot startup items will be displayed, and the status bar of each item of Liang Fiber will show whether it is enabled or not.

6. For example, if the search engine network disk in the picture is forbidden to start, then only the rubber calendar seems to need to right-click on the search engine network disk option, and the options bar that pops up will have the enable and disable buttons.

7. Sometimes we can also find the option of whether to start the boot in the setting function of the software.

Summary. 1. Press the F2 key when the computer is turned on, enter the page, and click "Boot".

2. Open the Boot page and set both Boot Mode and Boot Priority to Legacy First.

3. Below, there is a list of startup menus.

4. Press the F5 or F6 button according to the prompt information on the BIOS page to adjust the boot priority.

5. After the adjustment is completed, press the F10 key to save the BIOS settings modifications, and exit to change the boot sequence.

Set the priority order of devices that the system powers on.

Please wait a moment and have a great day! Have a good mood every day ahead!

1. Press the F2 key when the computer is turned on, enter the page, and click "Boot". 2. Open the Boot page, set both Boot Mode and Boot Priority to Legacy Below, there is a list of boot menus. 4. Press the F5 or F6 button according to the prompt information on the BIOS page to adjust the boot priority.

5. After the adjustment is completed, press the F10 key to save the BIOS settings modifications, and exit to change the boot sequence.

Dear <> is happy to answer for you that the computer system startup item setting refers to the normal operation of the computer system, before some operations are carried out, some settings need to be made. These settings allow your computer system to perform optimally when it is running normally, thus improving the efficiency of your computer system. Common computer system startup settings include:

Set the mausoleum excavation program that starts automatically when booting, set the default input method of the system, set the default language of the system, set the default display mode of the system, set the default sound of the system, set the system log of the system, set the security policy of the system, etc. In addition, when setting up the startup items of the computer system, you should also pay attention to some important security measures, such as setting the password of the computer system, setting up the firewall of the electric sullen sunbrain system, etc. Only through these correct settings can the normal operation of the computer system be guaranteed, and the computer system can be effectively protected from security threats such as nuclear poison and hacker attacks.